File: /var/backups/dpkg.status.0
Package: accountsservice
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 22.07.5-2ubuntu1.4
Depends: dbus (>= 1.9.18), libaccountsservice0 (= 22.07.5-2ubuntu1.4), libc6 (>= 2.34), libglib2.0-0 (>= 2.63.5), libpolkit-gobject-1-0 (>= 0.99)
Recommends: default-logind | logind
Suggests: gnome-control-center
Description: query and manipulate user account information
The AccountService project provides a set of D-Bus
interfaces for querying and manipulating user account
information and an implementation of these interfaces,
based on the useradd, usermod and userdel commands.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.3.1-1
Depends: libacl1 (= 2.3.1-1), libc6 (>= 2.34)
Description: access control list - utilities
This package contains the getfacl and setfacl utilities needed for
manipulating access control lists. It also contains the chacl IRIX
compatible utility.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/acl/
Package: acpid
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 150
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2.0.33-1ubuntu1
Depends: libc6 (>= 2.34), lsb-base (>= 3.2-14), kmod
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
/etc/default/acpid 5b934527919a9bba89c7978d15e918b3
/etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc
Description: Advanced Configuration and Power Interface event daemon
Modern computers support the Advanced Configuration and Power Interface (ACPI)
to allow intelligent power management on your system and to query battery and
configuration status.
.
ACPID is a completely flexible, totally extensible daemon for delivering
ACPI events. It listens on netlink interface (or on the deprecated file
/proc/acpi/event), and when an event occurs, executes programs to handle the
event. The programs it executes are configured through a set of configuration
files, which can be dropped into place by packages or by the admin.
Homepage: http://sourceforge.net/projects/acpid2/
Original-Maintainer: Josue Ortega <josue@debian.org>
Package: adduser
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 608
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.118ubuntu5
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl, ecryptfs-utils (>= 67-1)
Conffiles:
/etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
This package includes the 'adduser' and 'deluser' commands for creating
and removing users.
.
- 'adduser' creates new users and groups and adds existing users to
existing groups;
- 'deluser' removes users and groups and removes users from a given
group.
.
Adding users with 'adduser' is much easier than adding them manually.
Adduser will choose appropriate UID and GID values, create a home
directory, copy skeletal user configuration, and automate setting
initial values for the user's password, real name and so on.
.
Deluser can back up and remove users' home directories
and mail spool or all the files they own on the system.
.
A custom script can be executed after each of the commands.
Original-Maintainer: Debian Adduser Developers <adduser@packages.debian.org>
Package: adwaita-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5234
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 41.0-1ubuntu1
Replaces: adwaita-icon-theme-full (<< 41.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Depends: hicolor-icon-theme, gtk-update-icon-cache, ubuntu-mono | adwaita-icon-theme-full
Recommends: librsvg2-common
Breaks: adwaita-icon-theme-full (<< 41.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Description: default icon theme of GNOME (small subset)
This package contains the default icon theme used by the GNOME desktop.
The icons are used in many of the official gnome applications like eog,
evince, system monitor, and many more.
.
This package only contains a small subset of the original GNOME icons which
are not provided by the Humanity icon theme, to avoid installing many
duplicated icons. Please install adwaita-icon-theme-full if you want the full
set.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: alsa-topology-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.2.5.1-2
Replaces: libasound2-data (<< 1.2.1)
Breaks: libasound2-data (<< 1.2.1)
Enhances: libasound2-data
Description: ALSA topology configuration files
This package contains ALSA topology configuration files that can be used
by libasound2 for specific audio hardware.
.
ALSA is the Advanced Linux Sound Architecture.
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Homepage: https://www.alsa-project.org/
Package: alsa-ucm-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 599
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.2.6.3-1ubuntu1.12
Depends: libasound2 (>= 1.2.4)
Description: ALSA Use Case Manager configuration files
This package contains ALSA Use Case Manager configuration of audio
input/output names and routing for specific audio hardware. They can be
used with the alsaucm tool.
.
ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Package: amd64-microcode
Status: install ok installed
Priority: standard
Section: non-free/admin
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20191218.1ubuntu2.2
Recommends: initramfs-tools (>= 0.113~) | dracut (>= 044) | tiny-initramfs
Breaks: intel-microcode (<< 2)
Conffiles:
/etc/default/amd64-microcode eaa8a5fa3fb59af4f0f55e851a6e9b20
/etc/modprobe.d/amd64-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for AMD CPUs
This package contains microcode patches for all AMD AMD64
processors. AMD releases microcode patches to correct
processor behavior as documented in the respective processor
revision guides.
.
For Intel processors, please refer to the intel-microcode package.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 533
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4.52-1ubuntu4.7
Replaces: apache2.2-bin, apache2.2-common
Provides: httpd, httpd-cgi
Depends: apache2-bin (= 2.4.52-1ubuntu4.7), apache2-data (= 2.4.52-1ubuntu4.7), apache2-utils (= 2.4.52-1ubuntu4.7), lsb-base, mime-support, perl:any, procps
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ssl-cert
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser, ufw
Conflicts: apache2.2-bin, apache2.2-common
Conffiles:
/etc/apache2/apache2.conf 20589b50379161ebc8cb35f761af2646
/etc/apache2/conf-available/charset.conf 46ea15bcd82c11ea0973aa8842b1dc56
/etc/apache2/conf-available/localized-error-pages.conf cfd0ae5e448102514efe8b97181d19c9
/etc/apache2/conf-available/other-vhosts-access-log.conf 60d5d57995317aedb02bd2a20b366717
/etc/apache2/conf-available/security.conf f2e736bb593323988d1ebdabee67729f
/etc/apache2/conf-available/serve-cgi-bin.conf 21abde7dadc1020140b9ab796d06fd29
/etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
/etc/apache2/magic a6d370833a02f53db6a0a30800704994
/etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
/etc/apache2/mods-available/actions.conf 8736884dbc596bcfdbb392409c96fde5
/etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
/etc/apache2/mods-available/alias.conf c6e9f26152898c38e58211c8b362d5c3
/etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
/etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
/etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
/etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
/etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
/etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
/etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
/etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
/etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
/etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
/etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
/etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
/etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
/etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
/etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
/etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
/etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
/etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
/etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
/etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
/etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
/etc/apache2/mods-available/autoindex.conf bfba7d77669e02b869b92e98215d58fc
/etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
/etc/apache2/mods-available/brotli.load da4d337dd726ab27221b06d92c998e36
/etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
/etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
/etc/apache2/mods-available/cache_disk.conf b716cf836c9f00dae0366a39f511b76d
/etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
/etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
/etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
/etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
/etc/apache2/mods-available/cgid.conf e8a2836392051bde889cf9c137058273
/etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
/etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
/etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
/etc/apache2/mods-available/dav.load 2ee48948add72e6b8682d041acbcab7f
/etc/apache2/mods-available/dav_fs.conf 162db96239f13b5416f369b6306d9db6
/etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
/etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
/etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
/etc/apache2/mods-available/deflate.conf 3715759ec5f39673a60c56c4fcd14419
/etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
/etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
/etc/apache2/mods-available/dir.conf fe4bc5fa3b3cc7a241fe57f8fabc55a1
/etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
/etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
/etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
/etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
/etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
/etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
/etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
/etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
/etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
/etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
/etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
/etc/apache2/mods-available/http2.conf 1d8bfa43825ea9c16b6180452336ba11
/etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
/etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
/etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
/etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
/etc/apache2/mods-available/info.conf 4a4aa21e0bb474d420c9a3e1c3320677
/etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
/etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
/etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
/etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
/etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
/etc/apache2/mods-available/ldap.conf 344968a263507c1991a160427e51ed9c
/etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
/etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
/etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
/etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
/etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
/etc/apache2/mods-available/md.load 4fa08b541b4bac4a4849e6fd6d69c973
/etc/apache2/mods-available/mime.conf f6be43a514cb9ddb44044d57849f876f
/etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
/etc/apache2/mods-available/mime_magic.conf ebeaf79afde03c805e795bb51eec155f
/etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
/etc/apache2/mods-available/mpm_event.conf d868a76835101a66be2863362ef9f81a
/etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
/etc/apache2/mods-available/mpm_prefork.conf 26e539a16e51c4feddd2eedc568692e6
/etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
/etc/apache2/mods-available/mpm_worker.conf 2673a5a3f030bfb704bee034ce3a183c
/etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
/etc/apache2/mods-available/negotiation.conf 443398efdd41085bc1a70047f6e61c95
/etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
/etc/apache2/mods-available/proxy.conf b516d96935974214588d525edd7aed6d
/etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
/etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
/etc/apache2/mods-available/proxy_balancer.conf 5e9113f9556e17c0fec6c81232651791
/etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
/etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
/etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
/etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
/etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
/etc/apache2/mods-available/proxy_ftp.conf dd9beba82c2838bcfd51a05dfb540929
/etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
/etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
/etc/apache2/mods-available/proxy_html.conf 5b60af3b1796f2db4b5f7a8a7941f1bc
/etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
/etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
/etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
/etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
/etc/apache2/mods-available/proxy_uwsgi.load 37493bab0af283fd186d2797a9f5f95b
/etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
/etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
/etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
/etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
/etc/apache2/mods-available/reqtimeout.conf 40b45155afb3d14263d12e6fc4a98513
/etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
/etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
/etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
/etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
/etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
/etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
/etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
/etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
/etc/apache2/mods-available/setenvif.conf 533f5f92761c2c24d6820f1d7d1c45ad
/etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
/etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
/etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
/etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
/etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
/etc/apache2/mods-available/socache_redis.load 5c6ee35e3b89ea7ffdb19a2b344ada94
/etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
/etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
/etc/apache2/mods-available/ssl.conf 6c30f44f4e2ad6bc51c917294aa8e34b
/etc/apache2/mods-available/ssl.load 838b292226d2da6ceb3f1c793696ca12
/etc/apache2/mods-available/status.conf 5d3689f109baf304af4f145249ca6326
/etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
/etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
/etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
/etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
/etc/apache2/mods-available/userdir.conf 3a3142e84136336db8b940553a076983
/etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
/etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
/etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
/etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
/etc/apache2/ports.conf a961f23471d985c2b819b652b7f64321
/etc/apache2/sites-available/000-default.conf f3066f67070ab9b1ad9bab81ca05330a
/etc/apache2/sites-available/default-ssl.conf 801f4c746a88b4228596cb260a4220c4
/etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
/etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
/etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
/etc/init.d/apache2 9d22fb30358e61a6f190a0d09c5120bf
/etc/logrotate.d/apache2 ab347819cceccf236cfe769a13b89d2a
/etc/ufw/applications.d/apache2-utils.ufw.profile f8d4fd920e598ceb4379613c6261f6af
/etc/apache2/apache2.conf.in a6941c1aed84c36986d49cb4c59ce6d5 obsolete
Description: Apache HTTP Server
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
Installing this package results in a full installation, including the
configuration files, init scripts and support scripts.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5083
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apache2
Version: 2.4.52-1ubuntu4.7
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: perl:any, libapr1 (>= 1.7.0), libaprutil1 (>= 1.6.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libcurl4 (>= 7.28.0), libjansson4 (>= 2.4), libldap-2.5-0 (>= 2.5.4), liblua5.3-0, libnghttp2-14 (>= 1.20.0), libpcre3, libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Description: Apache HTTP Server (modules and other binary files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains the binaries only and does not set up a working
web-server instance. Install the "apache2" package to get a fully working
instance.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 856
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.52-1ubuntu4.7
Description: Apache HTTP Server (common files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains architecture-independent common files such as icons,
error pages and static index files.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 396
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.52-1ubuntu4.7
Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libssl3 (>= 3.0.0~~alpha1)
Description: Apache HTTP Server (utility programs for web servers)
Provides some add-on programs useful for any web server. These include:
- ab (Apache benchmark tool)
- fcgistarter (Start a FastCGI program)
- logresolve (Resolve IP addresses to hostnames in logfiles)
- htpasswd (Manipulate basic authentication files)
- htdigest (Manipulate digest authentication files)
- htdbm (Manipulate basic authentication files in DBM format, using APR)
- htcacheclean (Clean up the disk cache)
- rotatelogs (Periodically stop writing to a logfile and open a new one)
- split-logfile (Split a single log including multiple vhosts)
- checkgid (Checks whether the caller can setgid to the specified group)
- check_forensic (Extract mod_log_forensic output from Apache log files)
- httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2676
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.4-2ubuntu2.3
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, lsb-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: apparmor-profiles-extra (<< 1.21), fcitx-data (<< 1:4.2.9.1-1ubuntu2), snapd (<< 2.44.3+20.04~)
Conffiles:
/etc/apparmor.d/abi/3.0 f97e410509c5def279aa227c7de12e06
/etc/apparmor.d/abi/kernel-5.4-outoftree-network 57b68acd4e6418fe5a06dc8c04713e3d
/etc/apparmor.d/abi/kernel-5.4-vanilla 77047e6f0b014fa8bf27681998382044
/etc/apparmor.d/abstractions/X e08b3a65c568c19b5922de1db3df0d92
/etc/apparmor.d/abstractions/apache2-common 8608b847edc519a5733e97ba1f6311cb
/etc/apparmor.d/abstractions/apparmor_api/change_profile 4e10aac635b960dd6a2a94330d9dc4ce
/etc/apparmor.d/abstractions/apparmor_api/examine db7f9bf417820acdfc4c6386c749582d
/etc/apparmor.d/abstractions/apparmor_api/find_mountpoint 0380ddf9878be96962df2e81dc74f867
/etc/apparmor.d/abstractions/apparmor_api/introspect ca4db5b278f4c08892c2ef7027495051
/etc/apparmor.d/abstractions/apparmor_api/is_enabled ca0172ca6c89703ff9d8f4bc50998ddc
/etc/apparmor.d/abstractions/aspell f8676bccab5b82b0b6d723549b3a1a83
/etc/apparmor.d/abstractions/audio ee487ce12dc8194a58ca0aad23452923
/etc/apparmor.d/abstractions/authentication b3238cd14352633630d980a6e3b43613
/etc/apparmor.d/abstractions/base 9ac9a0b72f34936db683f2b4fa94c891
/etc/apparmor.d/abstractions/bash bc217483455477e1431f9e0b14fe2caf
/etc/apparmor.d/abstractions/consoles bea9fc84b0a5d025b0baa2012fb5f187
/etc/apparmor.d/abstractions/crypto 35881757d4885bde7e6d8b3c4285e9a4
/etc/apparmor.d/abstractions/cups-client b34dde998ba9e2008a449b7e806b4e8a
/etc/apparmor.d/abstractions/dbus a940df2475b2aadae7f0f352426ac0eb
/etc/apparmor.d/abstractions/dbus-accessibility 26e593998ef58a443df94b30c462969c
/etc/apparmor.d/abstractions/dbus-accessibility-strict 373b1eb5eab3ed798b87b63f395e59ec
/etc/apparmor.d/abstractions/dbus-network-manager-strict 2faa81c15df866984bbefe675dd7c535
/etc/apparmor.d/abstractions/dbus-session aae714455fab265eeaf1b6a8e347895a
/etc/apparmor.d/abstractions/dbus-session-strict 92b0802aa074d2fa736e6a34fb21dae6
/etc/apparmor.d/abstractions/dbus-strict 40f5d3c55ee978c6741d4d489357661c
/etc/apparmor.d/abstractions/dconf 7c1eb2f1eb19d459e86f262c0e682107
/etc/apparmor.d/abstractions/dovecot-common dc5a9e349cdac4d77aa883777c523c5a
/etc/apparmor.d/abstractions/dri-common 82e78cab7a0b877758d8d6a3dce1f50d
/etc/apparmor.d/abstractions/dri-enumerate 94c00f262a2e2ecc567417dd655bf06b
/etc/apparmor.d/abstractions/enchant 4b0d599339d403df6444e116f3b49095
/etc/apparmor.d/abstractions/exo-open c02b86d89bdf4954faecdc39bbe8da40
/etc/apparmor.d/abstractions/fcitx a272b0bc5d085b59eafdb3e91662ce1a
/etc/apparmor.d/abstractions/fcitx-strict ae494d8b71f3074ce9ae46d08c895113
/etc/apparmor.d/abstractions/fonts 8594bed8b12b8b8d531c9614a2e03b75
/etc/apparmor.d/abstractions/freedesktop.org 32548dac6ed1ea81e602e2890fbad4b1
/etc/apparmor.d/abstractions/gio-open e1170caef97ca7544f73394db5f29fd6
/etc/apparmor.d/abstractions/gnome 2693f4227aa0b4d6ee4ee33e29f541a4
/etc/apparmor.d/abstractions/gnupg 28bb447b06d329b9a0307fa3957738a9
/etc/apparmor.d/abstractions/gtk 73b9515d686c1763983d749b74930d90
/etc/apparmor.d/abstractions/gvfs-open 75e1db87e189996c93b7f6a54898027d
/etc/apparmor.d/abstractions/hosts_access 77d68b32a830118794977e7d9685e41e
/etc/apparmor.d/abstractions/ibus 3ccdcd8334042d7abc1691235d14a0e8
/etc/apparmor.d/abstractions/kde 1d25d6b22172fcd8f3707856d33a2bd0
/etc/apparmor.d/abstractions/kde-globals-write aa5efc180fc7f48e257e3a745525bb10
/etc/apparmor.d/abstractions/kde-icon-cache-write 0fe4c3bfdccd6098242ac94efb132a13
/etc/apparmor.d/abstractions/kde-language-write f6419d3ec59c4f72af6ff62c85e6b50f
/etc/apparmor.d/abstractions/kde-open5 719648196aaa5921cbbee56884ed0a0a
/etc/apparmor.d/abstractions/kerberosclient 9eec8b4b7751bfc24c7527366652332b
/etc/apparmor.d/abstractions/ldapclient 2d5fbb27b438f3a723af1bd0ec6589cc
/etc/apparmor.d/abstractions/libpam-systemd 54f5c7966013802550bcd298093356a8
/etc/apparmor.d/abstractions/likewise 5b5adaa576726b606437def545b213d9
/etc/apparmor.d/abstractions/mdns 97550547e53831aed4566fe0412f7fae
/etc/apparmor.d/abstractions/mesa ef72c67323d760811583c38d0aaaaa71
/etc/apparmor.d/abstractions/mir c04cae04705882b43888b8bdad39ab7c
/etc/apparmor.d/abstractions/mozc 51778ed730a4ad9d06ad39a848f98ae3
/etc/apparmor.d/abstractions/mysql d0220787933388d0a1ee1e641ecdeb8d
/etc/apparmor.d/abstractions/nameservice a04a23c6142943ef595564b806c4d2d0
/etc/apparmor.d/abstractions/nis 42d818438562ff0a7d21566c52bdf373
/etc/apparmor.d/abstractions/nss-systemd e51b32af03e4b39ad223a921fc08daf2
/etc/apparmor.d/abstractions/nvidia 536d7728a8b0b3d3e63c2135c2f5307f
/etc/apparmor.d/abstractions/opencl 390dd92d75c06bf01a0b380fa279816f
/etc/apparmor.d/abstractions/opencl-common eddad0564696b2ecab52f34c4cb0bf44
/etc/apparmor.d/abstractions/opencl-intel 5a07573a7082eb6906c62707415f86b7
/etc/apparmor.d/abstractions/opencl-mesa d847b3acc2ba5df53309564428b32c5e
/etc/apparmor.d/abstractions/opencl-nvidia 7a28b9490805d8d885c118004584fd63
/etc/apparmor.d/abstractions/opencl-pocl 45de7095b4df796a2a49a1f50bc6af83
/etc/apparmor.d/abstractions/openssl eebb603cd3a947c952ae9e7b2a21176a
/etc/apparmor.d/abstractions/orbit2 3243686cfb77b2eb8ddf4dd9b1dacf51
/etc/apparmor.d/abstractions/p11-kit 66b3abf2da8bd45e868a97a8b5c1c2de
/etc/apparmor.d/abstractions/perl 831a9730e6f5901c26e7370e72d6e4ca
/etc/apparmor.d/abstractions/php c906277ad06598dfea024d4e879e6b61
/etc/apparmor.d/abstractions/php-worker d63894f8faa7f2f4fe6616f9aa6c66fa
/etc/apparmor.d/abstractions/php5 349438200b0b1be7b44f44d2a8edb2d8
/etc/apparmor.d/abstractions/postfix-common 43269973845c1185a9a49dc989e46885
/etc/apparmor.d/abstractions/private-files ed54f0bf093512ab1278415225bd7c76
/etc/apparmor.d/abstractions/private-files-strict 863e1204a719f9d3ef434c51d10c9aae
/etc/apparmor.d/abstractions/python 085157c119b1c08179d0df54243879a8
/etc/apparmor.d/abstractions/qt5 82345ad67eb8610fd5416145758802b5
/etc/apparmor.d/abstractions/qt5-compose-cache-write d9590e9a862c5475024675006bf2b0ad
/etc/apparmor.d/abstractions/qt5-settings-write 08e907106f6afdd628ce7953d6804264
/etc/apparmor.d/abstractions/recent-documents-write 8e878574cc41a1db88eadc9c2386a323
/etc/apparmor.d/abstractions/ruby a376a4d9edd9b6e95196f04316846410
/etc/apparmor.d/abstractions/samba a93d8363540e7bca0fbf28873757fbfa
/etc/apparmor.d/abstractions/smbpass 22d2a76d6718f69140430f2e4160a17c
/etc/apparmor.d/abstractions/snap_browsers 1eee4cc3ce6156be1ce8a6a51713ce76
/etc/apparmor.d/abstractions/ssl_certs 613bf1b6aa1abb7e3c964725f0fb8050
/etc/apparmor.d/abstractions/ssl_keys 8610f0658edabc1b88a71676f0f5831b
/etc/apparmor.d/abstractions/svn-repositories ff8e52c4e1962b96d234dd7a67f1d8f8
/etc/apparmor.d/abstractions/ubuntu-bittorrent-clients d7c1be4622fa1a1a95cc710157495a8b
/etc/apparmor.d/abstractions/ubuntu-browsers 4637c1d896dc3f2348636d216f57b12d
/etc/apparmor.d/abstractions/ubuntu-browsers.d/chromium-browser 153113ed58cd2b82ae59e3cf99e3df49
/etc/apparmor.d/abstractions/ubuntu-browsers.d/java 6e3557f9b8d6d7bfa53e5773a1d1701c
/etc/apparmor.d/abstractions/ubuntu-browsers.d/kde 079bbcda041f2ab3b28a0aa73e808779
/etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto 2d485cfd81cbaa43ea61d754f937f722
/etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia 975af60c3988f0f29bc7650281add89d
/etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common 109801b1eeb3215b1940302855106050
/etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity f7141d1791df3cd70f1f1ffc598357de
/etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 530a78215e8a637dee7df2dc06bef104
/etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration c36564692bd37edd33abe677b820aa0a
/etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul 24a74fcfac9a35ff3213b5cf861f894b
/etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files 6a97ede75f91e3ffadd94c192b47d203
/etc/apparmor.d/abstractions/ubuntu-console-browsers 449cc0ce0d1645dfe750bc59286f3ac4
/etc/apparmor.d/abstractions/ubuntu-console-email 5df8527a131f6073c0105e55855921c2
/etc/apparmor.d/abstractions/ubuntu-email 4ed454816879d62df7390b625196eef8
/etc/apparmor.d/abstractions/ubuntu-feed-readers 652ddbb016d2970643ac0854be6afb7b
/etc/apparmor.d/abstractions/ubuntu-gnome-terminal 4a73e5a52f0aa3155b3ce5ce3f0b88a1
/etc/apparmor.d/abstractions/ubuntu-helpers 7a0554ba395711b18681b1b1615e15a0
/etc/apparmor.d/abstractions/ubuntu-konsole 49c45901c2aa6522869f6ecd11fc4885
/etc/apparmor.d/abstractions/ubuntu-media-players 1cc28886d11782d036f5ad31c1fe6c0e
/etc/apparmor.d/abstractions/ubuntu-unity7-base 76a91b15a0ac3045947dfb417f4be4e9
/etc/apparmor.d/abstractions/ubuntu-unity7-launcher 71beb26198b3834a8cf87cb3958ce49e
/etc/apparmor.d/abstractions/ubuntu-unity7-messaging d9524c849811152e7aaabfcac5bcd1ad
/etc/apparmor.d/abstractions/ubuntu-xterm bed284d239d3fad55ec4138c1db49b1d
/etc/apparmor.d/abstractions/user-download b0084d0cf20ab46c99a443d0bf4293e8
/etc/apparmor.d/abstractions/user-mail 93afccf07c25a810459abb567bdf0ccd
/etc/apparmor.d/abstractions/user-manpages 9f157582739dc69c3f2c092aa4cb76a2
/etc/apparmor.d/abstractions/user-tmp 7adbf0673a8185216a529092e1bafe25
/etc/apparmor.d/abstractions/user-write a35ac2aa74b253ad4d48c52d3e58e86c
/etc/apparmor.d/abstractions/video cc02171362a3819ae3ec5e041afe46ef
/etc/apparmor.d/abstractions/vulkan 6dc5c9c5fb65ea32f7dd3f20314fd9fe
/etc/apparmor.d/abstractions/wayland 0dc88e01e40a1f7710cde25cf2d3e665
/etc/apparmor.d/abstractions/web-data cb78fbb2953fa52805f371c166fd4fbd
/etc/apparmor.d/abstractions/winbind 456c2a26ca32421ac44bd8924fbf55a8
/etc/apparmor.d/abstractions/wutmp 5c2b39fe9978bb8b5e9637519c522c7f
/etc/apparmor.d/abstractions/xad 4716a62377ebebbe55f0246c35591485
/etc/apparmor.d/abstractions/xdg-desktop d0833b7462602d6008ad86a9ba724a1e
/etc/apparmor.d/abstractions/xdg-open 79c6f5afd2a89b7fbc53d23cbba367ea
/etc/apparmor.d/local/README e3739c14b4f8bb9b1934d7a4cdbf72c5
/etc/apparmor.d/lsb_release 4161e668a50a4548271937b6b41d3f0d
/etc/apparmor.d/nvidia_modprobe 89b64f211a74288347bd148f64a4623c
/etc/apparmor.d/tunables/alias 45dca5dd72a6c862d27caa936e6c00ad
/etc/apparmor.d/tunables/apparmorfs 99b56bc365d01a8d83cc60c359eb8184
/etc/apparmor.d/tunables/dovecot 1b0d5ec63a9c87387142bdb2c94e7ede
/etc/apparmor.d/tunables/etc e31a6ae15aa518bb5b826db5f6aaf9ff
/etc/apparmor.d/tunables/global bf4f0b3b17bf1625879e7e90cbe7f8a7
/etc/apparmor.d/tunables/home 7294038da607cb4310d40dc1cb89f398
/etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
/etc/apparmor.d/tunables/kernelvars 5d30bf3c3c6e33927ba26784985ed8ab
/etc/apparmor.d/tunables/multiarch b484327cecfb698fc83ac505699b255a
/etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
/etc/apparmor.d/tunables/proc ffaa055ceb36031c973ffaece22a5fc0
/etc/apparmor.d/tunables/run 780b70bb51fba582c115b085a962373b
/etc/apparmor.d/tunables/securityfs 45d73edb5f03d141634ec6a5ba2b10f3
/etc/apparmor.d/tunables/share a15f039c6615aa63acbec04b313f08f2
/etc/apparmor.d/tunables/sys 30f2fdf4695c26642ea02b5a2063cfbc
/etc/apparmor.d/tunables/xdg-user-dirs 6d1a4ea99a9af4cbab2255535a1c7077
/etc/apparmor/parser.conf 692c8fdebfbe29293c4c94053bc1d013
/etc/init.d/apparmor 42e157dc91f6554abefa2160c2bc42db
/etc/apparmor.d/abi/2.13 faa513513b656d84d5ed93fb26969c37 obsolete
Description: user-space parser utility for AppArmor
apparmor provides the system initialization scripts needed to use the
AppArmor Mandatory Access Control system, including the AppArmor Parser
which is required to convert AppArmor text profiles into machine-readable
policies that are loaded into the kernel for use with the AppArmor Linux
Security Module.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Package: apport
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.20.11-0ubuntu82.5
Replaces: core-dump-handler, python-apport (<< 2.2-0ubuntu1)
Provides: core-dump-handler
Depends: python3, python3-apport (>= 2.20.11-0ubuntu82.5), lsb-base (>= 3.0-6), python3-gi, gir1.2-glib-2.0 (>= 1.29.17)
Recommends: apport-symptoms, python3-systemd
Suggests: apport-gtk | apport-kde, policykit-1
Breaks: python-apport (<< 2.2-0ubuntu1)
Conflicts: core-dump-handler
Conffiles:
/etc/apport/blacklist.d/README.blacklist c2ed1eb9a17ec2550747b4960cf4b73c
/etc/apport/blacklist.d/apport 44503501302b80099552bac0204a45c1
/etc/apport/crashdb.conf 4202dae3eccfa5bbb33a0a9acfcd3724
/etc/bash_completion.d/apport_completion dfe766d9328bb5c895038b44185133f9
/etc/cron.daily/apport df5d3bc9ab3a67b58156376318077304
/etc/default/apport 3446c6cac185f44237f59786e006ebe4
/etc/init.d/apport 3d51dc9135014bb49b4a19ff8dab61f1
/etc/logrotate.d/apport fa54dab59ef899b48d5455c976008df4
Description: automatically generate crash reports for debugging
apport automatically collects data from crashed processes and
compiles a problem report in /var/crash/. This utilizes the crashdump
helper hook provided by the Ubuntu kernel.
.
This package also provides a command line frontend for browsing and
handling the crash reports. For desktops, you should consider
installing the GTK+ or Qt user interface (apport-gtk or apport-kde).
Homepage: https://wiki.ubuntu.com/Apport
Package: apport-symptoms
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.24
Recommends: apport
Description: symptom scripts for apport
Apport intercepts program crashes, collects debugging information about the
crash and the operating system environment, and sends it to bug trackers in a
standardized form. It also offers the user to report a bug about a package,
with again collecting as much information about it as possible.
.
This package extends Apport by some "symptom" scripts, so that bug reporters
do not have to guess the correct package, but report problems based on
symptoms that they have (like "sound problem"), through an interactive process.
Homepage: https://wiki.ubuntu.com/Apport
Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 4141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4.13
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 2.4.13)
Depends: adduser, gpgv | gpgv2 | gpgv1, libapt-pkg6.0 (>= 2.4.13), ubuntu-keyring, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgnutls30 (>= 3.7.0), libseccomp2 (>= 2.4.2), libstdc++6 (>= 11), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conffiles:
/etc/apt/apt.conf.d/01-vendor-ubuntu c69ce53f5f0755e5ac4441702e820505
/etc/apt/apt.conf.d/01autoremove ab6540f7278a05a4b7f9e58afcaa5f46
/etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
/etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
This package provides commandline tools for searching and
managing as well as querying information about packages
as a low-level access to all features of the libapt-pkg library.
.
These include:
* apt-get for retrieval of packages and information about them
from authenticated sources and for installation, upgrade and
removal of packages together with their dependencies
* apt-cache for querying available information about installed
as well as installable packages
* apt-cdrom to use removable media as a source for packages
* apt-config as an interface to the configuration settings
* apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: apt-transport-https
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 166
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: apt
Version: 2.4.13
Depends: apt (>= 1.5~alpha4)
Description: transitional package for https support
This is a dummy transitional package - https support has been moved into
the apt package in 1.5. It can be safely removed.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 792
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apt
Version: 2.4.13
Depends: apt (= 2.4.13), libapt-pkg6.0 (>= 2.4.13), libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: package management related utility programs
This package contains some less used commandline utilities related
to package management with APT.
.
* apt-extracttemplates is used by debconf to prompt for configuration
questions before installation.
* apt-ftparchive is used to create Packages and other index files
needed to publish an archive of Debian packages
* apt-sortpkgs is a Packages/Sources file normalizer.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: at
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 162
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.5-1ubuntu1
Depends: libpam-runtime (>= 1.0.1-11), lsb-base (>= 3.2-14), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~)
Suggests: default-mta | mail-transport-agent
Conffiles:
/etc/at.deny 8cb7e7632119dc26115436938efd2522
/etc/init.d/atd ce2de503acc3de02f544571e89d4d717
/etc/pam.d/atd ccdb71bdfe8764a2feb0f6e4ebbd378d
Description: Delayed job execution and batch processing
At and batch read shell commands from standard input
storing them as a job to be scheduled for execution in the
future.
.
Use
at to run the job at a specified time
batch to run the job when system load levels permit
Homepage: http://blog.calhariz.com
Original-Maintainer: Jose M Calhariz <calhariz@debian.org>
Package: at-spi2-core
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 276
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.44.0-3
Depends: libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.67.4), libsystemd0, libx11-6, libxtst6, gsettings-desktop-schemas
Conffiles:
/etc/X11/Xsession.d/90qt-a11y afc7b6dfce4d98efa295023045b20424
/etc/environment.d/90qt-a11y.conf 4f76c97d1817370071bed644d921f142
/etc/xdg/Xwayland-session.d/00-at-spi da53e8f602edbb788b3cd6dbb056e45d
/etc/xdg/autostart/at-spi-dbus-bus.desktop b97f071f92cfc4af379984b27cbb7304
Description: Assistive Technology Service Provider Interface (dbus core)
This package contains the core components of GNOME Accessibility.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility
Package: autoconf
Status: deinstall ok config-files
Priority: optional
Section: devel
Installed-Size: 1860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.69-11.1
Config-Version: 2.69-11.1
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
/etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
The standard for FSF source packages. This is only useful if you
write your own programs or if you extensively modify other people's
programs.
.
For an extensive library of additional Autoconf macros, install the
`autoconf-archive' package.
.
This version of autoconf is not compatible with scripts meant for
Autoconf 2.13 or earlier.
Original-Maintainer: Ben Pfaff <pfaffben@debian.org>
Homepage: http://www.gnu.org/software/autoconf/
Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 394
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 12ubuntu4.4
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.4.10-10ubuntu3)
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~), ubuntu-server (<< 1.453)
Conffiles:
/etc/debian_version 62f807f9edf48f460110889c2ecc3db6
/etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
/etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
/etc/host.conf 89408008f2585c957c031716600d5a80
/etc/issue c78111f3dbc7f6637ec91efd15fb66cf
/etc/issue.net 7c72aeb5e80b9193525ac63f9deac023
/etc/legal 0110925f6e068836ef2e09356e3651d9
/etc/lsb-release a7ee3eb6543fd677167a7776f044cb92
/etc/profile.d/01-locale-fix.sh 870346d97b16faac4a371b04ffe4cc2f
/etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
/etc/update-motd.d/10-help-text d95d18b11ac12cf6582d08a1643034f3
/etc/update-motd.d/50-motd-news 54567afa89b3a7983d05ff217fe4a9fd
Description: Debian base system miscellaneous files
This package contains the basic filesystem hierarchy of a Debian system, and
several important miscellaneous files, such as /etc/debian_version,
/etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 243
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.52build1
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
These are the canonical master copies of the user database files
(/etc/passwd and /etc/group), containing the Debian-allocated user and
group IDs. The update-passwd tool is provided to keep the system databases
synchronized with these master files.
Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1864
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.1-6ubuntu1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
/etc/bash.bashrc 3aa8b92d1dd6ddf4daaedc019662f1dc
/etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
/etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
/etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
Bash is an sh-compatible command language interpreter that executes
commands read from the standard input or from a file. Bash also
incorporates useful features from the Korn and C shells (ksh and csh).
.
Bash is ultimately intended to be a conformant implementation of the
IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
.
The Programmable Completion Code, by Ian Macdonald, is now found in
the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1464
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:2.11-5ubuntu1
Provides: dh-sequence-bash-completion
Conffiles:
/etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
/etc/profile.d/bash_completion.sh 4257431f99f10e5fbe86b39b6b9e5002
Description: programmable completion for the bash shell
bash completion extends bash's standard completion behavior to achieve
complex command lines with just a few keystrokes. This project was
conceived to produce programmable completion routines for the most
common Linux/UNIX commands, reducing the amount of typing sysadmins
and programmers need to do on a daily basis.
Homepage: https://github.com/scop/bash-completion
Original-Maintainer: Gabriel F. T. Gomes <gabriel@inconstante.net.br>
Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 215
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.07.1-3build1
Depends: libc6 (>= 2.34), libreadline8 (>= 6.0)
Description: GNU bc arbitrary precision calculator language
GNU bc is an interactive algebraic language with arbitrary precision which
follows the POSIX 1003.2 draft standard, with several extensions including
multi-character variable names, an `else' statement and full Boolean
expressions. GNU bc does not require the separate GNU dc program.
Original-Maintainer: Ryan Kavanagh <rak@debian.org>
Homepage: https://www.gnu.org/software/bc/
Package: bcache-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.8-4ubuntu3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libuuid1 (>= 2.16), gawk
Recommends: initramfs-tools | linux-initramfs-tool
Description: bcache userspace tools
Bcache allows the use of SSDs to cache other block devices.
.
Documentation for the run-time interface is included in the kernel tree; in
Documentation/bcache.txt.
.
This package includes udev rules, initramfs support, and the utilities to
create a new bcache as well as inspect existing bcache partitions.
Homepage: https://bcache.evilpiepirate.org/
Original-Maintainer: David Mohr <david@mcbf.net>
Package: bind9-dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 527
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.18.18-0ubuntu0.22.04.1
Provides: dnsutils
Depends: bind9-host | host, bind9-libs (= 1:9.18.18-0ubuntu0.22.04.1), libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libidn2-0 (>= 2.0.0), libkrb5-3 (>= 1.6.dfsg.2)
Breaks: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Conflicts: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Description: Clients provided with BIND 9
The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
name server. BIND 9 is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers various client programs related to DNS that are
derived from the BIND 9 source tree.
.
- dig - query the DNS in various ways
- nslookup - the older way to do it
- nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.18.18-0ubuntu0.22.04.1
Replaces: bind-host (<< 1:9.13.6~)
Provides: host
Depends: bind9-libs (= 1:9.18.18-0ubuntu0.22.04.1), libc6 (>= 2.34), libidn2-0 (>= 2.0.0)
Breaks: bind-host (<< 1:9.13.6~)
Description: DNS Lookup Utility
This package provides the 'host' DNS lookup utility in the form that
is bundled with the BIND 9 sources.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: bind9-libs
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3431
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.18.18-0ubuntu0.22.04.1
Replaces: bind-libs (<< 1:9.13.6~)
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libssl3 (>= 3.0.0~~alpha1), libuv1 (>= 1.34.2), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: bind-libs (<< 1:9.13.6~)
Description: Shared Libraries used by BIND 9
The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
name server. BIND 9 is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package contains a bundle of shared libraries used by BIND 9.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.38-4ubuntu2.3
Provides: binutils-gold, elf-binutils
Depends: binutils-common (= 2.38-4ubuntu2.3), libbinutils (= 2.38-4ubuntu2.3), binutils-x86-64-linux-gnu (= 2.38-4ubuntu2.3)
Suggests: binutils-doc (>= 2.38-4ubuntu2.3)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
The programs in this package are used to assemble, link and manipulate
binary and object files. They may be used in conjunction with a compiler
and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.3
Replaces: binutils (<< 2.29.1-3.1~)
Breaks: binutils (<< 2.29.1-3.1~)
Description: Common files for the GNU assembler, linker and binary utilities
This package contains the localization files used by binutils packages for
various target architectures and parts of the binutils documentation. It is
not useful on its own.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 10439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: binutils
Version: 2.38-4ubuntu2.3
Replaces: binutils (<< 2.29-6)
Depends: binutils-common (= 2.38-4ubuntu2.3), libbinutils (= 2.38-4ubuntu2.3), libc6 (>= 2.34), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libgcc-s1 (>= 4.2), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.38-4ubuntu2.3)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities, for x86-64-linux-gnu target
This package provides GNU assembler, linker and binary utilities
for the x86-64-linux-gnu target.
.
You don't need this package unless you plan to cross-compile programs
for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: bolt
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 469
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.2-1
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.56), libpolkit-gobject-1-0 (>= 0.99), libudev1 (>= 183)
Description: system daemon to manage thunderbolt 3 devices
Thunderbolt 3 features different security modes that require
devices to be authorized before they can be used. The D-Bus API can be
used to list devices, enroll them (authorize and store them in the
local database) and forget them again (remove previously enrolled
devices). It also emits signals if new devices are connected (or
removed). During enrollment devices can be set to be automatically
authorized as soon as they are connected. A command line tool, called
boltctl, can be used to control the daemon and perform all the above
mentioned tasks.
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Homepage: https://gitlab.freedesktop.org/bolt/bolt
Package: bsdextrautils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 337
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3
Replaces: bsdmainutils (<< 12.1.3)
Depends: libc6 (>= 2.34), libsmartcols1 (>= 2.31.1), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3)
Description: extra utilities from 4.4BSD-Lite
This package contains some extra BSD utilities: col, colcrt, colrm, column,
hd, hexdump, look, ul and write.
Other BSD utilities are provided by bsdutils and calendar.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: bsdmainutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 12.1.7+nmu3ubuntu2
Depends: bsdutils (>= 3.0-0), debianutils (>= 1.8), bsdextrautils (>= 2.35.2-7), ncal
Suggests: calendar, whois, vacation, mailutils
Conffiles:
/etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96 obsolete
Description: Transitional package for more utilities from FreeBSD
This is a transitional package, it can be safely removed.
Original-Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.37.2-4ubuntu3)
Version: 1:2.37.2-4ubuntu3
Pre-Depends: libc6 (>= 2.34), libsystemd0
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
This package contains the bare minimum of BSD utilities needed for a Debian
system: logger, renice, script, scriptlive, scriptreplay and wall. The
remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: btrfs-progs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.16.2-1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (>= 1.42), liblzo2-2 (>= 2.02), libudev1 (>= 183), libuuid1 (>= 2.16), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.2.0)
Suggests: duperemove
Breaks: initramfs-tools (<< 0.137~), libgcc-s1 (<< 10-20200211)
Description: Checksumming Copy on Write Filesystem utilities
Btrfs is a copy on write filesystem for Linux aimed at implementing
advanced features while focusing on fault tolerance, repair and easy
administration.
.
This package contains utilities (mkfs, fsck) used to work with btrfs
and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Original-Maintainer: Adam Borowski <kilobyte@angband.pl>
Homepage: http://btrfs.wiki.kernel.org/
Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.9ubuntu3
Depends: libc6-dev | libc-dev, gcc (>= 4:10.2), g++ (>= 4:10.2), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
If you do not plan to build Debian packages, you don't need this
package. Starting with dpkg (>= 1.14.18) this package is required
for building Debian packages.
.
This package contains an informational list of packages which are
considered essential for building Debian packages. This package also
depends on the packages on that list, to make it easy to have the
build-essential packages installed.
.
If you have this package installed, you only need to install whatever
a package specifies as its build-time dependencies to build the
package. Conversely, if you are determining what your package needs
to build-depend on, you can always leave out the packages this
package depends on.
.
This package is NOT the definition of what packages are
build-essential; the real definition is in the Debian Policy Manual.
This package contains merely an informational list, which is all
most people need. However, if this package and the manual disagree,
the manual is correct.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: busybox-initramfs
Status: install ok installed
Priority: important
Section: shells
Installed-Size: 361
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.30.1-7ubuntu3
Depends: libc6 (>= 2.34)
Description: Standalone shell setup for initramfs
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for the most common
utilities you would usually find on your desktop system (i.e., ls, cp, mv,
mount, tar, etc.). The utilities in BusyBox generally have fewer options than
their full-featured GNU cousins; however, the options that are included
provide the expected functionality and behave very much like their GNU
counterparts.
.
busybox-initramfs provides a simple stand alone shell that provides
only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: busybox-static
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 2245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.30.1-7ubuntu3
Replaces: busybox
Provides: busybox
Conflicts: busybox
Description: Standalone rescue shell with tons of builtin utilities
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for the most common
utilities you would usually find on your desktop system (i.e., ls, cp, mv,
mount, tar, etc.). The utilities in BusyBox generally have fewer options than
their full-featured GNU cousins; however, the options that are included
provide the expected functionality and behave very much like their GNU
counterparts.
.
busybox-static provides you with a statically linked simple stand alone shell
that provides all the utilities available in BusyBox. This package is
intended to be used as a rescue shell, in the event that you screw up your
system. Invoke "busybox sh" and you have a standalone shell ready to save
your system from certain destruction. Invoke "busybox", and it will list the
available builtin commands.
Built-Using: glibc (= 2.35-0ubuntu1)
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: byobu
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 624
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 5.133-1
Replaces: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Provides: byobu-extras, screen-profiles, screen-profiles-extras
Depends: debconf (>= 0.5) | debconf-2.0, python3:any, gettext-base, iproute2, python3, python3-newt, tmux (>= 1.5), gawk
Recommends: less, pastebinit, sensible-utils, run-one
Suggests: apport, ccze, gnome-terminal | xterm, gnupg, lsb-release, po-debconf, screen, speedometer, ttf-ubuntu-font-family (>= 0.80-0ubuntu1~medium), update-notifier-common, vim, wireless-tools
Breaks: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Enhances: screen
Conffiles:
/etc/byobu/backend 9f19a0102abedf38ec2174039d0d0d6d
/etc/byobu/socketdir 774a796c75a097ffd7c5c7492cb39568
/etc/profile.d/Z97-byobu.sh d3fffff67e2a324cc1111f05cb9cc53b
Description: text window manager, shell multiplexer, integrated DevOps environment
Byobu is Ubuntu's powerful text-based window manager, shell multiplexer, and
integrated DevOps environment.
.
Using Byobu, you can quickly create and move between different windows
over a single SSH connection or TTY terminal, split each of those windows into
multiple panes, monitor dozens of important statistics about your system,
detach and reattach to sessions later while your programs continue to run in
the background.
Homepage: http://byobu.org
Package: bzip2
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.8-5build1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5build1), libc6 (>= 2.34)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
bzip2 is a freely available, patent free, data compressor.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://sourceware.org/bzip2/
Package: ca-certificates
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20240203~22.04.1
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
Contains the certificate authorities shipped with Mozilla's browser to allow
SSL-based applications to check for the authenticity of SSL connections.
.
Please note that Debian can neither confirm nor deny whether the
certificate authorities whose certificates are included in this package
have in any way been audited for trustworthiness or RFC 3647 compliance.
Full responsibility to assess them belongs to the local system
administrator.
Original-Maintainer: Julien Cristau <jcristau@debian.org>
Package: chromium-browser
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 161
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:85.0.4183.83-0ubuntu2.22.04.1
Provides: gnome-www-browser, www-browser, x-www-browser
Depends: debconf (>= 0.5) | debconf-2.0
Pre-Depends: debconf, snapd
Description: Transitional package - chromium-browser -> chromium snap
This is a transitional dummy package. It can safely be removed.
.
chromium-browser is now replaced by the chromium snap.
Homepage: https://chromium.googlesource.com/chromium/src/
Package: cloud-guest-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 65
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-utils
Version: 0.32-22-g45fe84a5-0ubuntu1
Replaces: cloud-utils (<< 0.27-0ubuntu3)
Depends: fdisk | gdisk, python3:any
Breaks: cloud-utils (<< 0.27-0ubuntu3)
Description: cloud guest utilities
This package contains programs useful inside cloud instance.
It contains 'growpart' for resizing a partition during boot.
Homepage: https://launchpad.net/cloud-utils
Package: cloud-initramfs-copymods
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 25
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.47ubuntu1
Depends: initramfs-tools
Description: copy initramfs modules into root filesystem for later use
When booting with an external-to-root kernel and initramfs, you need
to ensure that /lib/modules contains any necessary modules not already
loaded.
.
This package arranges for the modules in the initramfs to be placed
into /lib/modules after the switchroot is done.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: cloud-initramfs-dyn-netconf
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 31
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.47ubuntu1
Depends: initramfs-tools
Description: write a network interface file in /run for BOOTIF
This package provides an initramfs module that will write a simple
network interfaces formatted file to /run/network/interfaces with
entries for any devices that were configured during initramfs.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: command-not-found
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 37
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Version: 22.04.0
Depends: python3-commandnotfound (= 22.04.0)
Suggests: snapd
Conffiles:
/etc/apt/apt.conf.d/50command-not-found 9bf399a111915919e5c6952f64a6f5eb
/etc/zsh_command_not_found 81c5c243d61731a56db6670038bf8509
Description: Suggest installation of packages in interactive bash sessions
This package will install a handler for command_not_found that looks up
programs not currently installed but available from the repositories.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>
Package: composer
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 2531
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.2.6-2ubuntu4
Depends: php-cli, php-common, php-composer-ca-bundle (>= 1.0), php-composer-ca-bundle (<< 2~~), php-composer-metadata-minifier (>= 1.0), php-composer-metadata-minifier (<< 2~~), php-composer-semver (>= 3.0), php-composer-semver (<< 4~~), php-composer-spdx-licenses (>= 1.2), php-composer-spdx-licenses (<< 2~~), php-composer-xdebug-handler (>= 2.0), php-composer-xdebug-handler (<< 3~~), php-json-schema (>= 5.2.11), php-json-schema (<< 6~~), php-psr-log, jsonlint (>= 1.4), jsonlint (<< 2~~), php-symfony-console, php-symfony-filesystem, php-symfony-finder, php-symfony-process, php-react-promise, php-composer-pcre (>= 1.0), php-composer-pcre (<< 2~~)
Recommends: git, unzip
Suggests: fossil, mercurial, subversion, php-zip
Description: dependency manager for PHP
Composer helps you declare, manage and install dependencies of PHP projects.
It ensures you have the right stack everywhere.
.
It behaves like Bundler (Ruby), npm (Node), etc.
Homepage: https://getcomposer.org/
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: console-setup
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 426
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.205ubuntu3
Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.205ubuntu3)
Pre-Depends: debconf (>= 1.5.34)
Suggests: lsb-base (>= 3.0-6), locales
Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6)
Conflicts: console-setup-mini
Description: console font and keymap setup program
This package provides the console with the same keyboard
configuration scheme as the X Window System. As a result, there is no
need to duplicate or change the keyboard files just to make simple
customizations such as the use of dead keys, the key functioning as
AltGr or Compose key, the key(s) to switch between Latin and
non-Latin mode, etc.
.
The package also installs console fonts supporting many of the
world's languages. It provides an unified set of font faces - the
classic VGA, the simplistic Fixed, and the cleaned Terminus,
TerminusBold and TerminusBoldVGA.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: console-setup-linux
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 2171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.205ubuntu3
Replaces: console-setup (<< 1.71), console-terminus
Provides: console-terminus
Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.205ubuntu3), init-system-helpers (>= 1.29~) | initscripts
Suggests: console-setup
Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus
Conflicts: console-setup-freebsd
Conffiles:
/etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777
/etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f
/etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed
/etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b
/etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247
/etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3
/etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae
/etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9
/etc/console-setup/compose.ISO-8859-1.inc 28f20a64f3f0b175cfaec4bce07465c2
/etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686
/etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243
/etc/console-setup/compose.ISO-8859-13.inc 5e9ad266f17ff2a0281a870079bc8284
/etc/console-setup/compose.ISO-8859-14.inc 360a44f83e8f8c9d463c9400dcc60de4
/etc/console-setup/compose.ISO-8859-15.inc 695ec832355223fb036629e4e6a9a963
/etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20
/etc/console-setup/compose.ISO-8859-2.inc c93ffa7f80e22c04c94e89a0cd742458
/etc/console-setup/compose.ISO-8859-3.inc 67b8fafc842a4dc9b3bc0c06af394834
/etc/console-setup/compose.ISO-8859-4.inc aba127ff3df5159c3070617a7efac46c
/etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da
/etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f
/etc/console-setup/compose.ISO-8859-7.inc 8f48a9f7c9f69ca828edbd7b276fe406
/etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b
/etc/console-setup/compose.ISO-8859-9.inc 05aae7589b5062a53f346f721cb0f7d3
/etc/console-setup/compose.KOI8-R.inc 8cfd7766b86e5e55d6e71d0d95519c92
/etc/console-setup/compose.KOI8-U.inc 217ee62f6982736276f41f760f8622f8
/etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89
/etc/console-setup/compose.VISCII.inc e4ffc74868adf4cc39ba61dd99581899
/etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd
/etc/console-setup/vtrgb 1fb3c13c4fcfa8cc4131aba905df559e
/etc/console-setup/vtrgb.vga 302837772c14006c7956211e184acfbd
/etc/init.d/console-setup.sh 510488b5120b580b673a15b75a5498b0
/etc/init.d/keyboard-setup.sh b868200c6e36ef87e27ead9a3ddad2db
Description: Linux specific part of console-setup
This package includes fonts in psf format and definitions of various
8-bit charmaps.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: containerd.io
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 113826
Maintainer: Containerd team <help@containerd.io>
Architecture: amd64
Version: 1.6.25-1
Replaces: containerd, runc
Provides: containerd, runc
Depends: libc6 (>= 2.34), libseccomp2 (>= 2.5.0)
Conflicts: containerd, runc
Conffiles:
/etc/containerd/config.toml 1d862b12f2cb082816175b28ee501789
Description: An open and reliable container runtime
Homepage: https://containerd.io
Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 7112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.32-4.1ubuntu1
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libselinux1 (>= 3.1~)
Description: GNU core utilities
This package contains the basic file, shell and text manipulation
utilities which are expected to exist on every operating system.
.
Specifically, this package includes:
arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
csplit cut date dd df dir dircolors dirname du echo env expand expr
factor false flock fmt fold groups head hostid id install join link ln
logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
tail tee test timeout touch tr true truncate tsort tty uname unexpand
uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>
Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13+dfsg-7
Replaces: cpio-mt
Depends: libc6 (>= 2.34)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
GNU cpio is a tool for creating and extracting archives, or copying
files from one place to another. It handles a number of cpio formats
as well as reading and writing tar files.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://www.gnu.org/software/cpio/
Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Depends: cpp-11 (>= 11.2.0-1~)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: GNU C preprocessor (cpp)
The GNU C preprocessor is a macro processor that is used automatically
by the GNU C compiler to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
.
This is a dependency package providing the default GNU C preprocessor.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: cpp-11
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 26284
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: gcc-11-locales (>= 11)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
A macro processor that is used automatically by the GNU C compiler
to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: crda
Status: deinstall ok config-files
Priority: optional
Section: net
Installed-Size: 265
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.18-1build1
Config-Version: 3.18-1build1
Depends: libc6 (>= 2.7), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libssl1.1 (>= 1.1.0), wireless-regdb, iw (>= 3.2-1~)
Conffiles:
/etc/default/crda d1f1468521b60cdfc0b9d22d5a74975a
Description: wireless Central Regulatory Domain Agent
This package provides a Central Regulatory Domain Agent (CRDA) to be used by
the Linux kernel cfg80211 wireless subsystem to query and apply the regulatory
domain settings wireless devices may operate within for a given location.
.
CRDA queries operational frequency regulations stored within the regulatory
database provided by the wireless-regdb package.
Homepage: https://wireless.wiki.kernel.org/en/developers/Regulatory/CRDA
Original-Maintainer: Ben Hutchings <ben@decadent.org.uk>
Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-137ubuntu3
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), debianutils (>= 1.7), sensible-utils, adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: anacron (>= 2.0-1), logrotate, checksecurity, default-mta | mail-transport-agent
Conffiles:
/etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/crontab e57fd77c50de7b8a8eec19de0ec3f4f3
/etc/default/cron bc9ab63f9e143d7338909d50494d552f
/etc/init.d/cron 2a663c89329b71c3659e7601fdb80c92
/etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
The cron daemon is a background process that runs particular programs at
particular times (for example, every minute, day, week, or month), as
specified in a crontab. By default, users may also create crontabs of
their own so that processes are run on their behalf.
.
Output from the commands is usually mailed to the system administrator
(or to the user in question); you should probably install a mail system
as well so that you can receive these messages.
.
This cron package does not provide any system maintenance tasks. Basic
periodic maintenance tasks are provided by other packages, such
as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/
Original-Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Package: cryptsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 475
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:2.4.3-1ubuntu1.1
Replaces: cryptsetup-run (<< 2:2.1.0-6)
Depends: cryptsetup-bin (>= 2:1.6.0), dmsetup, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libcryptsetup12 (>= 2:2.4), libjson-c5 (>= 0.15), libssh-4 (>= 0.8.0)
Recommends: cryptsetup-initramfs
Suggests: dosfstools, keyutils, liblocale-gettext-perl
Breaks: cryptsetup-run (<< 2:2.1.0-6)
Conffiles:
/etc/default/cryptdisks 3e3b2248193105b5ecd9456c01ef3736
/etc/init.d/cryptdisks 8dd64a17dcefb1dd1a60eec286a6b502
/etc/init.d/cryptdisks-early 9c68271b34d88afd2764cdb203af9bd1
Description: disk encryption support - startup scripts
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
Cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package includes support for
automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. Additional features are cryptoroot support through
initramfs-tools and several supported ways to read a passphrase or key.
.
This package provides the cryptdisks_start and _stop wrappers, as well as
luksformat.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Package: cryptsetup-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 584
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: cryptsetup
Version: 2:2.4.3-1ubuntu1.1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.34), libcryptsetup12 (>= 2:2.4), libjson-c5 (>= 0.15), libpopt0 (>= 1.14), libssh-4 (>= 0.8.0), libuuid1 (>= 2.16)
Description: disk encryption support - command line tools
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides cryptsetup, cryptsetup-reencrypt, integritysetup
and veritysetup.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Package: cryptsetup-initramfs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: cryptsetup
Version: 2:2.4.3-1ubuntu1.1
Replaces: cryptsetup (<< 2:2.0.3-1)
Depends: busybox-initramfs, cryptsetup (>= 2:2.4.3-1ubuntu1.1), initramfs-tools (>= 0.137) | linux-initramfs-tool, debconf (>= 0.5) | debconf-2.0
Recommends: console-setup, kbd, plymouth
Breaks: cryptsetup (<< 2:2.0.3-1)
Conffiles:
/etc/cryptsetup-initramfs/conf-hook 9a127a9edfca239740eba9197b0b901f
Description: disk encryption support - initramfs integration
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides initramfs integration for cryptsetup.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 444
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.81.0-1ubuntu1.20
Depends: libc6 (>= 2.34), libcurl4 (= 7.81.0-1ubuntu1.20), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
curl is a command line tool for transferring data with URL syntax, supporting
DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
based upload, proxies, cookies, user+password authentication (Basic, Digest,
NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
busload of other useful tricks.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 214
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.11+git20210903+057cd650a4ed-3build1
Depends: debianutils (>= 2.15), dpkg (>= 1.19.1), debconf (>= 0.5) | debconf-2.0
Pre-Depends: libc6 (>= 2.34)
Description: POSIX-compliant shell
The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
from ash.
.
Since it executes scripts faster than bash, and has fewer library
dependencies (making it more robust against software or hardware
failures), it is used as the default system shell on Debian systems.
Original-Maintainer: Andrej Shadura <andrewsh@debian.org>
Homepage: http://gondor.apana.org.au/~herbert/dash/
Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 582
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.12.20-2ubuntu4.1
Provides: dbus-bin (= 1.12.20-2ubuntu4.1), dbus-daemon (= 1.12.20-2ubuntu4.1), dbus-session-bus-common (= 1.12.20-2ubuntu4.1), dbus-system-bus (= 1.12.20-2ubuntu4.1), dbus-system-bus-common (= 1.12.20-2ubuntu4.1), default-dbus-system-bus
Depends: adduser, libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.12.20-2ubuntu4.1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
/etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
/etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (daemon and utilities)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
This package contains the D-Bus daemon and related utilities.
.
The client-side library can be found in the libdbus-1-3 package, as it is no
longer contained in this package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.12.20-2ubuntu4.1
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus (>= 1.12.20-2ubuntu4.1), libpam-systemd, systemd
Recommends: systemd-sysv
Breaks: dbus-x11 (<< 1.9.10-2~), policykit-1 (<< 0.105-12~), udisks2 (<< 2.1.5-2~)
Conffiles:
/etc/X11/Xsession.d/20dbus_xdg-runtime a10c47d15857ae4b557dc7e062f6e6f1
Description: simple interprocess messaging system (systemd --user integration)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
On systemd systems, this package opts in to the session model in which
a user's session starts the first time they log in, and does not end
until all their login sessions have ended. This model merges all
parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
to one graphical session, into a single "user-session" or "super-session"
within which all background D-Bus services are shared.
.
Multiple graphical sessions per user are not currently supported in this
mode; as a result, it is particularly suitable for gdm, which responds to
requests to open a parallel graphical session by switching to the existing
graphical session and unlocking it.
.
To retain dbus' traditional session semantics, in which login sessions
are artificially isolated from each other, remove this package and install
dbus-x11 instead.
.
See the dbus package description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: dconf-gsettings-backend
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-3
Provides: gsettings-backend
Depends: dconf-service (<< 0.40.0-3.1~), dconf-service (>= 0.40.0-3), libdconf1 (= 0.40.0-3), libc6 (>= 2.14), libglib2.0-0 (>= 2.55.2)
Description: simple configuration storage system - GSettings back-end
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains a back-end for GSettings. It is needed by
applications accessing settings through GSettings to set custom values
and listen for changes.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/dconf
Package: dconf-service
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: dconf
Version: 0.40.0-3
Depends: default-dbus-session-bus | dbus-session-bus, libdconf1 (= 0.40.0-3), libc6 (>= 2.34), libglib2.0-0 (>= 2.55.2)
Recommends: dconf-gsettings-backend
Description: simple configuration storage system - D-Bus service
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains the DConf service, which applications talk to
using D-Bus in order to obtain their settings. It is mostly used by the
GSettings backend.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/dconf
Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 512
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.79ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk3-perl, libnet-ldap-perl, perl, debconf-kde-helper (>= 0.1+git20110702)
Breaks: apt-listchanges (<< 3.14), ubiquity (<< 17.10.2), update-notifier-common (<< 3.187~)
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
/etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
/etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
Debconf is a configuration management system for debian packages. Packages
use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: debconf-i18n
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 787
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.79ubuntu1
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.79ubuntu1), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
This package provides full internationalization for debconf, including
translations into all available languages, support for using translated
debconf templates, and support for proper display of multibyte character
sets.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.5-1ubuntu2
Pre-Depends: libc6 (>= 2.34)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
This package provides a number of small utilities which are used
primarily by the installation scripts of Debian packages, although
you may use them directly.
.
The specific utilities included are:
add-shell installkernel ischroot remove-shell run-parts savelog
tempfile update-shells which
Original-Maintainer: Clint Adams <clint@debian.org>
Package: debsums
Status: deinstall ok config-files
Priority: optional
Section: admin
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.2
Config-Version: 3.0.2
Depends: libdpkg-perl, libfile-fnmatch-perl, perl, ucf (>= 0.28), perl:any
Suggests: bash-completion
Conffiles:
/etc/cron.daily/debsums 46f711d07a06527203bdc692b0663044
/etc/cron.monthly/debsums b33e9c02ad0c7c693e83cc980d7cbe87
/etc/cron.weekly/debsums 357cbe94a665b971ac63b894213088d6
/etc/default/debsums bfeb4943dea48f281f8e25184bd61baa
Description: tool for verification of installed package files against MD5 checksums
debsums can verify the integrity of installed package files against
MD5 checksums installed by the package, or generated from a .deb
archive.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: dh-python
Status: install ok installed
Priority: important
Section: python
Installed-Size: 479
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.20220403
Replaces: python (<< 2.7.18-2), python2 (<< 2.7.18-2), python3 (<< 3.3.2-4~)
Provides: dh-sequence-pypy, dh-sequence-python2, dh-sequence-python3
Depends: python3:any, python3-distutils | python3 (<< 3.6.5~rc1-1)
Suggests: libdpkg-perl, dpkg-dev, flit, python3-build, python3-tomli, python3-installer
Breaks: python (<< 2.7.18-2), python2 (<< 2.7.18-2), python3 (<< 3.3.2-4~)
Description: Debian helper tools for packaging Python libraries and applications
This package contains:
* pybuild - invokes various build systems for requested Python versions in
order to build modules and extensions
* dh_python2 - calculates Python 2.X dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
* dh_python3 - calculates Python 3.X dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
* dh_pypy - calculates PyPy dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.8-0ubuntu2
Replaces: diff
Pre-Depends: libc6 (>= 2.34)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
The diffutils package provides the diff, diff3, sdiff, and cmp programs.
.
`diff' shows differences between two files, or each corresponding file
in two directories. `cmp' shows the offsets and line numbers where
two files differ. `cmp' can also show all the characters that
differ between the two files, side by side. `diff3' shows differences
among three files. `sdiff' merges two files interactively.
.
The set of differences produced by `diff' can be used to distribute
updates to text files (such as program source code) to other people.
This method is especially useful when the differences are small compared
to the complete files. Given `diff' output, the `patch' program can
update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 676
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg2 (<< 2.1.10-2)
Depends: adduser, gpgconf (= 2.2.27-3ubuntu2.1), lsb-base (>= 3.2-13), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgnutls30 (>= 3.7.2), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libldap-2.5-0 (>= 2.5.4), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Breaks: gnupg2 (<< 2.1.10-2)
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
dirmngr is a server for managing and downloading OpenPGP and X.509
certificates, as well as updates and status signals related to those
certificates. For OpenPGP, this means pulling from the public
HKP/HKPS keyservers, or from LDAP servers. For X.509 this includes
Certificate Revocation Lists (CRLs) and Online Certificate Status
Protocol updates (OCSP). It is capable of using Tor for network
access.
.
dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
among other tools. Unless this package is installed, the parts of
the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: distro-info
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.1ubuntu0.1
Depends: distro-info-data (>= 0.46), libc6 (>= 2.34)
Suggests: shunit2 (>= 2.1.6)
Description: provides information about the distributions' releases
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>
Package: distro-info-data
Status: install ok installed
Priority: important
Section: devel
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.52ubuntu0.5
Breaks: distro-info (<< 1.0~)
Description: information about the distributions' releases (data files)
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
.
This package contains the data files.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>
Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lvm2 (2.03.11-2.1ubuntu4)
Version: 2:1.02.175-2.1ubuntu4
Depends: libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2cmd2.03 (>= 2.03.11)
Description: Linux Kernel Device Mapper event daemon
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains a daemon to monitor events of devmapper devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.3-3ubuntu0.1
Depends: libc6 (>= 2.34)
Description: SMBIOS/DMI table decoder
Dmidecode reports information about the system's hardware as described in the
system BIOS according to the SMBIOS/DMI standard.
.
This information typically includes system manufacturer, model name, serial
number, BIOS version, asset tag as well as a lot of other details of varying
level of interest and reliability depending on the manufacturer. This will
often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
USB).
.
Beware that DMI data have proven to be too unreliable to be blindly trusted.
Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 273
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.03.11-2.1ubuntu4)
Version: 2:1.02.175-2.1ubuntu4
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.138)
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: dns-root-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2021011101
Description: DNS root data including root zone and DNSSEC key
This package contains various root zone related data as published
by IANA to be used by various DNS software as a common source
of DNS root zone data, namely:
.
* Root Hints (root.hints)
* Root Trust Anchors (root.key, root.ds)
Original-Maintainer: dns-root-data packagers <dns-root-data@packages.debian.org>
Homepage: https://data.iana.org/root-anchors/
Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 840
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dnsmasq
Version: 2.86-1.1ubuntu0.3
Replaces: dnsmasq (<< 2.63-1~), dnsmasq-base
Provides: dnsmasq-base
Depends: adduser, libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libgmp10 (>= 2:6.2.1+dfsg), libhogweed6 (>= 2.4-3), libidn2-0 (>= 2.0.0), libnetfilter-conntrack3 (>= 1.0.1), libnettle8 (>= 2.4-3)
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Conflicts: dnsmasq-base-lua
Conffiles:
/etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
Description: Small caching DNS proxy and DHCP/TFTP server
This package contains the dnsmasq executable and documentation, but
not the infrastructure required to run it as a system daemon. For
that, install the dnsmasq package.
Homepage: http://www.thekelleys.org.uk/dnsmasq/doc.html
Original-Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Package: dnsutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: bind9
Version: 1:9.18.18-0ubuntu0.22.04.1
Depends: bind9-dnsutils
Description: Transitional package for bind9-dnsutils
This is a transitional package. It can safely be removed.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: docker-buildx-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 76085
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce (5:24.0.5-1~ubuntu.22.04~jammy)
Version: 0.11.2-1~ubuntu.22.04~jammy
Replaces: docker-ce-cli
Enhances: docker-ce-cli
Description: Docker Buildx cli plugin.
Homepage: https://github.com/docker/buildx
Package: docker-ce
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 94341
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 5:24.0.7-1~ubuntu.22.04~jammy
Replaces: docker-engine
Depends: containerd.io (>= 1.6.4), docker-ce-cli, iptables, libseccomp2 (>= 2.3.0), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libsystemd0
Recommends: apparmor, ca-certificates, docker-ce-rootless-extras, git, libltdl7, pigz, procps, xz-utils
Suggests: aufs-tools, cgroupfs-mount | cgroup-lite
Conflicts: docker (<< 1.5~), docker-engine, docker-engine-cs, docker.io, lxc-docker, lxc-docker-virtual-package
Conffiles:
/etc/default/docker 01f06689327cb8ded58332709d28670c
/etc/init.d/docker 4cd80dac70f6019cb5a9c36c38f2e8d2
Description: Docker: the open-source application container engine
Docker is a product for you to build, ship and run any application as a
lightweight container
.
Docker containers are both hardware-agnostic and platform-agnostic. This means
they can run anywhere, from your laptop to the largest cloud compute instance and
everything in between - and they don't require you to use a particular
language, framework or packaging system. That makes them great building blocks
for deploying and scaling web apps, databases, and backend services without
depending on a particular stack or provider.
Homepage: https://www.docker.com
Package: docker-ce-cli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 35685
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:24.0.7-1~ubuntu.22.04~jammy
Replaces: docker-ce (<< 5:0)
Depends: libc6 (>= 2.34)
Recommends: docker-buildx-plugin, docker-compose-plugin
Breaks: docker-ce (<< 5:0)
Conflicts: docker (<< 1.5~), docker-engine, docker-engine-cs, docker.io, lxc-docker, lxc-docker-virtual-package
Description: Docker CLI: the open-source application container engine
Docker is a product for you to build, ship and run any application as a
lightweight container
.
Docker containers are both hardware-agnostic and platform-agnostic. This means
they can run anywhere, from your laptop to the largest cloud compute instance and
everything in between - and they don't require you to use a particular
language, framework or packaging system. That makes them great building blocks
for deploying and scaling web apps, databases, and backend services without
depending on a particular stack or provider.
Homepage: https://www.docker.com
Package: docker-ce-rootless-extras
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 19680
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:24.0.7-1~ubuntu.22.04~jammy
Replaces: rootlesskit
Depends: dbus-user-session, libc6 (>= 2.34)
Recommends: slirp4netns (>= 0.4.0)
Breaks: rootlesskit
Conflicts: rootlesskit
Enhances: docker-ce
Description: Rootless support for Docker.
Use dockerd-rootless.sh to run the daemon.
Use dockerd-rootless-setuptool.sh to setup systemd for dockerd-rootless.sh .
This package contains RootlessKit, but does not contain VPNKit.
Either VPNKit or slirp4netns (>= 0.4.0) needs to be installed separately.
Homepage: https://docs.docker.com/engine/security/rootless/
Package: docker-compose
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.29.2-1
Depends: python3-cached-property (>= 1.2.0) | python3 (>> 3.8), python3-distro (>= 1.5.0), python3-docker (>= 5), python3-dockerpty (>= 0.4.1), python3-docopt (>= 0.6.1), python3-dotenv (>= 0.13.0), python3-jsonschema, python3-requests (>= 2.20.0), python3-texttable (>= 0.9.0), python3-websocket (>= 0.32.0), python3-yaml (>= 3.10), python3:any, python3-distutils
Recommends: docker.io (>= 1.9.0)
Description: define and run multi-container Docker applications with YAML
docker-compose is a service management software built on top of docker. Define
your services and their relationships in a simple YAML file, and let compose
handle the rest.
Original-Maintainer: Docker Compose Team <team+docker-compose@tracker.debian.org>
Homepage: https://docs.docker.com/compose/
Package: docker-compose-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 59356
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce (5:24.0.6-1~ubuntu.22.04~jammy)
Version: 2.21.0-1~ubuntu.22.04~jammy
Enhances: docker-ce-cli
Description: Docker Compose (V2) plugin for the Docker CLI.
.
This plugin provides the 'docker compose' subcommand.
.
The binary can also be run standalone as a direct replacement for
Docker Compose V1 ('docker-compose').
Homepage: https://github.com/docker/compose
Package: dosfstools
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2-1build3
Depends: libc6 (>= 2.34)
Description: utilities for making and checking MS-DOS FAT filesystems
The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
respectively make and check MS-DOS FAT filesystems.
Original-Maintainer: Andreas Bombe <aeb@debian.org>
Homepage: https://github.com/dosfstools/dosfstools
Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6733
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.1ubuntu2.2
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.34), liblzma5 (>= 5.2.2), libselinux1 (>= 3.1~), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
/etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
/etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
/etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
/etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
/etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
This package provides the low-level infrastructure for handling the
installation and removal of Debian software packages.
.
For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2488
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.1ubuntu2.3
Depends: perl:any, libdpkg-perl (= 1.21.1ubuntu2.3), tar (>= 1.28-1), bzip2, xz-utils, patch (>= 2.7), make, binutils, lto-disabled-list
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg, gpgv, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: debhelper (<< 10.10.1~)
Conffiles:
/etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
/etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
This package provides the development tools (including dpkg-source)
required to unpack, build and upload Debian source packages.
.
Most Debian source packages will require additional tools to build;
for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: e2fsprogs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.46.5-2ubuntu1.1
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.46.5-2ubuntu1.1), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
/etc/cron.d/e2scrub_all bc533e09f3b3d96bfe1633ad57eb7026
/etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
/etc/mke2fs.conf 6e57073b9789a67a66b4681739445a38
Description: ext2/ext3/ext4 file system utilities
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package contains programs for creating, checking, and maintaining
ext2/3/4-based file systems. It also includes the "badblocks" program,
which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: e2fsprogs-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.1
Replaces: e2fsprogs (<< 1.43.5-1)
Depends: e2fsprogs (>= 1.46.5-2ubuntu1.1), e2fsprogs (<< 1.46.5-2ubuntu1.1+c~)
Description: ext2/ext3/ext4 file system utilities - translations
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package provides translations for messages for programs found in
the 'e2fsprogs' package.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.18-1
Depends: libc6 (>= 2.34)
Description: classic UNIX line editor
ed is a line-oriented text editor. It is used to
create, display, modify and otherwise manipulate text
files.
.
red is a restricted ed: it can only edit files in the
current directory and cannot execute shell commands.
Original-Maintainer: Martin Zobel-Helas <zobel@debian.org>
Homepage: https://www.gnu.org/software/ed/
Package: eject
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 152
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libc6 (>= 2.34), libmount1 (>= 2.24.2)
Description: ejects CDs and operates CD-Changers under Linux
This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT
ioctl). It also allows setting the autoeject feature.
.
On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
the active disc.
.
You can also use eject to properly disconnect external mass-storage
devices like digital cameras or portable music players.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 630
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:5.16-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Conffiles:
/etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85
/etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5
Description: display or change Ethernet device settings
ethtool can be used to query and change settings such as speed, auto-
negotiation and checksum offload on many network devices, especially
Ethernet devices.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Homepage: https://www.kernel.org/pub/software/network/ethtool/
Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 220
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.28-1ubuntu1
Depends: libfakeroot (>= 1.28-1ubuntu1), libc6 (>= 2.34)
Description: tool for simulating superuser privileges
fakeroot provides a fake "root environment" by means of LD_PRELOAD and
SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
stat(), and other file-manipulation functions, so that unprivileged
users can (for instance) populate .deb archives with root-owned files;
various build tools use fakeroot for this by default.
.
This package contains fakeroot command and the daemon that remembers
fake ownership/permissions of files manipulated by fakeroot
processes.
Original-Maintainer: Clint Adams <clint@debian.org>
Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libc6 (>= 2.34), libfdisk1 (>= 2.36), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libreadline8 (>= 6.0), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6)
Description: collection of partitioning utilities
This package contains the classic fdisk, sfdisk and cfdisk partitioning
utilities from the util-linux suite.
.
The utilities included in this package allow you to partition
your hard disk. The utilities supports both modern and legacy
partition tables (eg. GPT, MBR, etc).
.
The fdisk utility is the classical text-mode utility.
The cfdisk utilitity gives a more userfriendly curses based interface.
The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: file
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.41-3ubuntu0.1
Depends: libc6 (>= 2.34), libmagic1 (= 1:5.41-3ubuntu0.1)
Breaks: debhelper (<< 12.2~)
Description: Recognize the type of data in a file using "magic" numbers
The file command is "a file type guesser", a command-line tool that
tells you in words what kind of data a file contains.
.
This package contains the file program itself.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: finalrd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 30
Maintainer: Dimitri John Ledkov <xnox@ubuntu.com>
Architecture: all
Version: 9build1
Recommends: initramfs-tools-core
Description: final runtime directory for shutdown
Generates a systemd compatible shutdown runtime directory. This
enables to execute scripts and binaries to clean up shutdown.
.
Also supports hookless operation, to simply facilitate clean shutdowns.
.
Approximate tmpfs RAM requirement is 14MB on shutdown.
Homepage: https://launchpad.net/finalrd
Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 620
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.0-1ubuntu3
Pre-Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
GNU findutils provides utilities to find files meeting specified
criteria and perform various actions on the files which are found.
This package contains 'find' and 'xargs'; however, 'locate' has
been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/
Original-Maintainer: Andreas Metzler <ametzler@debian.org>
Package: firmware-sof-signed
Status: install ok installed
Priority: optional
Section: non-free/kernel
Installed-Size: 17573
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: firmware-sof
Version: 2.0-1ubuntu4.4
Replaces: linux-firmware (<= 1.202)
Breaks: linux-firmware (<= 1.202)
Description: Intel SOF firmware - signed
Provides the Intel SOF audio firmware and topology needed for audio
functionality on some Intel system.
.
This package contains the pre-built and signed binaries.
Homepage: https://github.com/thesofproject/sof-bin
Original-Maintainer: Mark Pearson <markpearson@lenovo.com>
Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 375
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13.1-4.2ubuntu5
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.8.1), fontconfig-config
Description: generic font configuration library - support binaries
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
Fontconfig is not a rasterization library, nor does it impose a
particular rasterization library on the application. The X-specific
library 'Xft' uses fontconfig along with freetype to specify and
rasterize fonts.
.
This package contains a program to maintain the fontconfig cache
(fc-cache), a sample program to list installed fonts (fc-list), a program
to test the matching rules (fc-match) and a program to dump the binary
cache files in string form (fc-cat). It no longer makes fonts managed by defoma
available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fontconfig
Version: 2.13.1-4.2ubuntu5
Depends: ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-liberation2 | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre
Breaks: libfontconfig1 (<< 2.13.0)
Conffiles:
/etc/fonts/conf.avail/10-antialias.conf 3629dcc380ac8c5b0306febc33b5667b
/etc/fonts/conf.avail/10-autohint.conf b64114e5af24e4cdfc5bd5023f280287
/etc/fonts/conf.avail/10-hinting-full.conf a5bec12a811215bb09bd0e0a58469918
/etc/fonts/conf.avail/10-hinting-medium.conf 03715b87280da58cfe9d4c4f4d6d0488
/etc/fonts/conf.avail/10-hinting-none.conf 709229aa350cfaf1eb59cbc4ab5f2377
/etc/fonts/conf.avail/10-hinting-slight.conf 690acea9572bf68b0ef975636002e4f3
/etc/fonts/conf.avail/10-no-sub-pixel.conf 1a29e6674047b54b5d240e30807fab0e
/etc/fonts/conf.avail/10-scale-bitmap-fonts.conf 7bf8b372085774e6cbdae99235624440
/etc/fonts/conf.avail/10-sub-pixel-bgr.conf c7aea7a564a5ec98b76d8ef1c6791ee3
/etc/fonts/conf.avail/10-sub-pixel-rgb.conf 8bcf6192e90c1b3d0972eb1657b87e0c
/etc/fonts/conf.avail/10-sub-pixel-vbgr.conf aee77dfa949e40dd1a2309bfae59f7c6
/etc/fonts/conf.avail/10-sub-pixel-vrgb.conf c7c6b8d23a8a25d68b71a7d63c4d2d29
/etc/fonts/conf.avail/10-unhinted.conf 9e2da80ad573a4c8cf582b3b63a54ed7
/etc/fonts/conf.avail/11-lcdfilter-default.conf f4229be8b8d744a07bd153804cc89510
/etc/fonts/conf.avail/11-lcdfilter-legacy.conf 74c9020e8ca6b87ee60b919219cbbb6e
/etc/fonts/conf.avail/11-lcdfilter-light.conf ac0f49d468587a5db0a7e96700c9a159
/etc/fonts/conf.avail/20-unhint-small-vera.conf 8b4b489882181273bb954bbeca039706
/etc/fonts/conf.avail/25-unhint-nonlatin.conf a755ea93d91a116223ee0a6f2179e7da
/etc/fonts/conf.avail/30-metric-aliases.conf 75c9e9472b8d86398bb90aad2f9f33ef
/etc/fonts/conf.avail/40-nonlatin.conf 20ee0ed0c5d5ec9e1cf840861654e5b9
/etc/fonts/conf.avail/45-generic.conf e5a3f4b8d89676c4f6e24e78fa0ab226
/etc/fonts/conf.avail/45-latin.conf 78e96661b2e081a6855194cdbfbd414b
/etc/fonts/conf.avail/49-sansserif.conf ddb0852326b96387179f833fce3fff61
/etc/fonts/conf.avail/50-user.conf ef75f810654a94c9735c63ba050c3000
/etc/fonts/conf.avail/51-local.conf 05120737595ec804f105e86a2c2f10df
/etc/fonts/conf.avail/53-monospace-lcd-filter.conf 94669e241a96e50d95cdd4b126e43ec6
/etc/fonts/conf.avail/60-generic.conf 36818672366678a1242830b5e7829aef
/etc/fonts/conf.avail/60-latin.conf 4b9c621952455f0e19eaa91fe40ab01b
/etc/fonts/conf.avail/65-fonts-persian.conf 3c3369d2e5cddac97685a35f923cd8ae
/etc/fonts/conf.avail/65-khmer.conf 2c60845ccef2f9fb278dbc776f852e7b
/etc/fonts/conf.avail/65-nonlatin.conf b4b7785deb1beea8d134f47f5230ba36
/etc/fonts/conf.avail/69-unifont.conf d01fe25b8869985f337a7d90704cefe6
/etc/fonts/conf.avail/70-force-bitmaps.conf 05da482c17d5c285ec2cf7134c8f6c5a
/etc/fonts/conf.avail/70-no-bitmaps.conf 1b7c38fe5f2e26c4581332c90cc1277f
/etc/fonts/conf.avail/70-yes-bitmaps.conf 91c414090c7d8bfe557785fe845cb6bd
/etc/fonts/conf.avail/80-delicious.conf ddad25ea4458fffa36d7a1f2f53bc5e9
/etc/fonts/conf.avail/90-synthetic.conf e79defb0b94fe9d0a9af39c83e48b9dc
/etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729
/etc/fonts/fonts.conf 1a6ebc792c61d5944c30e1696446f5d4
/etc/fonts/conf.avail/10-hinting.conf 4d1fb88a99c516270526c8dca5764df8 obsolete
/etc/fonts/conf.avail/30-urw-aliases.conf 49db036d2a065197e140484c0513e69f obsolete
Description: generic font configuration library - configuration
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2954
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-2build1
Conffiles:
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
/etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
/etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
/etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
/etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
/etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
/etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
/etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
DejaVu provides an expanded version of the Vera font family aiming for
quality and broader Unicode coverage while retaining the original Vera
style. DejaVu currently works towards conformance with the Multilingual
European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
fonts provide serif, sans and monospaced variants.
.
This package only contains the sans, sans-bold, serif, serif-bold,
mono and mono-bold variants. For additional variants, see the
fonts-dejavu-extra package.
.
DejaVu fonts are intended for use on low-resolution devices (mainly
computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Homepage: https://dejavu-fonts.github.io/
Package: fonts-liberation
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2089
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:1.07.4-11
Description: Fonts with the same metrics as Times, Arial and Courier
A set of serif, sans-serif and monospaced fonts from Red Hat with
exactly the same metrics as the (non-free) Microsoft Times, Arial
and Courier fonts, which implies those fonts can serve as a drop-in
replacement. The font family is named Liberation.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: https://github.com/liberationfonts/liberation-1.7-fonts
Package: fonts-ubuntu-console
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-ubuntu
Version: 0.83-6ubuntu1
Description: console version of the Ubuntu Mono font
The Ubuntu Font Family is a set of contemporary sans-serif fonts developed
between 2010-2011. Dalton Maag performed the font design work and
implementation with funding from Canonical. The fonts have been the default
fonts for Ubuntu since 2010.
.
This package contains the "Ubuntu Mono" font converted to a bitmap version
for Linux console use. These fonts can be loaded from a virtual terminal by
executing "setfont /usr/share/consolefonts/UbuntuMono*.psf" .
Homepage: https://design.ubuntu.com/font/
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Package: friendly-recovery
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.2.42
Depends: systemd-sysv, whiptail
Recommends: gettext-base, update-manager-core
Breaks: grub2 (<< 1.99-12ubuntu4), initramfs-tools (<< 0.99ubuntu4), upstart (<< 1.3-0ubuntu9)
Description: Make recovery boot mode more user-friendly
Make the recovery boot mode more user-friendly by providing a menu
with pluggable options.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: ftp
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: tnftp
Version: 20210827-4build1
Replaces: ftp (<= 0.17-35)
Depends: tnftp
Description: dummy transitional package for tnftp
This is a dummy transitional package transitioning ftp to tnftp.
Homepage: http://en.wikipedia.org/wiki/Tnftp
Original-Maintainer: xiao sheng wen <atzlinux@sina.com>
Package: fuse
Status: deinstall ok config-files
Priority: optional
Section: utils
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.9.9-3
Config-Version: 2.9.9-3
Depends: libc6 (>= 2.28), libfuse2 (= 2.9.9-3), adduser, mount (>= 2.19.1), sed (>= 4)
Conffiles:
/etc/fuse.conf 298587592c8444196833f317def414f2 obsolete
Description: Filesystem in Userspace
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki
Package: fuse3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.10.5-1build1
Replaces: fuse
Provides: fuse (= 3.10.5-1build1)
Depends: libc6 (>= 2.34), libfuse3-3 (= 3.10.5-1build1), adduser, mount (>= 2.19.1), sed (>= 4), lsb-base (>= 3.2-14)
Breaks: fuse
Conffiles:
/etc/fuse.conf ba9c9667f7df01ae7081d2c05d1d24e6
Description: Filesystem in Userspace (3.x version)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki
Package: fwupd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 6736
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.7.9-1~22.04.3
Replaces: fwupdate (<< 12-7), gir1.2-dfu-1.0 (<< 0.9.7-1), libdfu-dev (<< 0.9.7-1), libdfu1 (<< 0.9.7-1)
Provides: fwupdate
Depends: libfwupd2 (= 1.7.9-1~22.04.3), libfwupdplugin5 (= 1.7.9-1~22.04.3), libc6 (>= 2.34), libcurl3-gnutls (>= 7.63.0), libefiboot1 (>= 37), libglib2.0-0 (>= 2.70.0), libgnutls30 (>= 3.7.3), libgudev-1.0-0 (>= 165), libgusb2 (>= 0.3.8), libjcat1 (>= 0.1.4), libjson-glib-1.0-0 (>= 1.5.2), libmbim-glib4 (>= 1.26.0), libmbim-proxy, libmm-glib0 (>= 1.18), libpolkit-gobject-1-0 (>= 0.99), libqmi-glib5 (>= 1.18.0), libqmi-proxy, libsmbios-c2, libsqlite3-0 (>= 3.6.1), libsystemd0, libtss2-esys-3.0.2-0 (>= 2.3.1), libxmlb2 (>= 0.3.2), shared-mime-info
Recommends: python3, bolt, dbus, secureboot-db, udisks2, fwupd-signed
Suggests: gir1.2-fwupd-2.0
Breaks: fwupdate (<< 12-7), gir1.2-dfu-1.0 (<< 0.9.7-1), libdfu-dev (<< 0.9.7-1), libdfu1 (<< 0.9.7-1)
Conflicts: fwupdate-amd64-signed, fwupdate-arm64-signed, fwupdate-armhf-signed, fwupdate-i386-signed
Conffiles:
/etc/fwupd/daemon.conf 377ba3fdc58ecf45cb0083b2841edc7b
/etc/fwupd/msr.conf 2c9f619efa963a505fa3670b77795c44
/etc/fwupd/redfish.conf 9651d998d3914ce10b28f61f5fff8b98
/etc/fwupd/remotes.d/dell-esrt.conf 71236e67e6fd095c771f9312cbae0382
/etc/fwupd/remotes.d/lvfs-testing.conf 29d484b5d5c374ba278eba49ab28e40b
/etc/fwupd/remotes.d/lvfs.conf 03115854971bef4f13b16729e9c107ad
/etc/fwupd/remotes.d/vendor-directory.conf f65a59cfb87730fb523910f492dbceb6
/etc/fwupd/remotes.d/vendor.conf b54e960f98c71d49af9421cf8e9cf7b9
/etc/fwupd/thunderbolt.conf ecd9f08e4e9382b959e8604758ce71b3
/etc/fwupd/uefi_capsule.conf ef3a1b12a9884d69456c137193c7d72f
/etc/grub.d/35_fwupd d35ffdb3ab8eef4d4fa9f916ff621b55
/etc/pki/fwupd-metadata/GPG-KEY-Linux-Foundation-Metadata 2ace8894994764ae32e391bc0c68e398
/etc/pki/fwupd-metadata/GPG-KEY-Linux-Vendor-Firmware-Service 5abbdc42a8e3d9e60039ab658700ec71
/etc/pki/fwupd-metadata/LVFS-CA.pem d9dff488bd9051268984da014f0be43d
/etc/pki/fwupd/GPG-KEY-Linux-Foundation-Firmware de0622638572a2f6a6e29fa83f387eea
/etc/pki/fwupd/GPG-KEY-Linux-Vendor-Firmware-Service 5abbdc42a8e3d9e60039ab658700ec71
/etc/pki/fwupd/LVFS-CA.pem d9dff488bd9051268984da014f0be43d
/etc/update-motd.d/85-fwupd ded254e025601b203abb19ef3fdc88b9
Description: Firmware update daemon
fwupd is a daemon to allow session software to update device firmware.
You can either use a GUI software manager like GNOME Software to view and
apply updates, the command-line tool or the system D-Bus interface directly.
Firmware updates are supported for a variety of technologies.
See <https://github.com/fwupd/fwupd> for details
Homepage: https://github.com/fwupd/fwupd
Original-Maintainer: Debian EFI <debian-efi@lists.debian.org>
Package: fwupd-signed
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: fwupd-signed (1.51.1~22.04.1)
Version: 1.51.1~22.04.1+1.4-0ubuntu0.1
Recommends: secureboot-db, fwupd
Description: Linux Firmware Updater EFI signed binary
fwupd provides functionality to update system firmware. It has been
initially designed to update firmware using UEFI capsule updates, but
it is designed to be extensible to other firmware update standards.
.
This package contains a version of the fwupd binary signed with
Canonical's UEFI signing key.
Built-Using: fwupd-efi (= 1:1.4-0ubuntu0.1)
Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Provides: c++-compiler, g++-x86-64-linux-gnu (= 4:11.2.0-1ubuntu1)
Depends: cpp (= 4:11.2.0-1ubuntu1), gcc (= 4:11.2.0-1ubuntu1), g++-11 (>= 11.2.0-1~), gcc-11 (>= 11.2.0-1~)
Suggests: g++-multilib
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
.
This is a dependency package providing the default GNU C++ compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: g++-11
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 28891
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Provides: c++-compiler, c++abi2-dev
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), gcc-11 (= 11.4.0-1ubuntu1~22.04), libstdc++-11-dev (= 11.4.0-1ubuntu1~22.04), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: g++-11-multilib, gcc-11-doc (>= 11)
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1680
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.1.0-1ubuntu0.1
Provides: awk
Pre-Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libmpfr6 (>= 3.1.3), libreadline8 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Conffiles:
/etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa
/etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061
Description: GNU awk, a pattern scanning and processing language
`awk', a program that you can use to select particular records in a
file and perform operations upon them.
.
Gawk is the GNU Project's implementation of the AWK programming language.
It conforms to the definition of the language in the POSIX 1003.2 Command
Language And Utilities Standard. This version in turn is based on the
description in The AWK Programming Language, by Aho, Kernighan, and
Weinberger, with the additional features defined in the System V Release
4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/
Original-Maintainer: Adrian Bunk <bunk@debian.org>
Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Provides: c-compiler, gcc-x86-64-linux-gnu (= 4:11.2.0-1ubuntu1)
Depends: cpp (= 4:11.2.0-1ubuntu1), gcc-11 (>= 11.2.0-1~)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
.
This is a dependency package providing the default GNU C compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gcc-11
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 52747
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 11.4.0-1ubuntu1~22.04
Replaces: cpp-11 (<< 7.1.1-8)
Provides: c-compiler
Depends: cpp-11 (= 11.4.0-1ubuntu1~22.04), gcc-11-base (= 11.4.0-1ubuntu1~22.04), libcc1-0 (>= 11.4.0-1ubuntu1~22.04), binutils (>= 2.38), libgcc-11-dev (= 11.4.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Suggests: gcc-11-multilib, gcc-11-doc (>= 11), gcc-11-locales (>= 11)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gcc-11-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 273
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
This package contains files common to all languages and libraries
contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gcc-12-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 272
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
This package contains files common to all languages and libraries
contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gdb
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11311
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.1-0ubuntu1~22.04
Replaces: gdb
Provides: gdb-minimal (= 12.1-0ubuntu1~22.04)
Depends: libbabeltrace1 (>= 1.5.4), libc6 (>= 2.34), libdebuginfod1 (>= 0.180), libexpat1 (>= 2.0.1), libgcc-s1 (>= 4.2), libgmp10 (>= 2:6.2.1+dfsg), libipt2 (>= 2.0), liblzma5 (>= 5.1.1alpha+20110809), libmpfr6 (>= 3.1.3), libncursesw6 (>= 6), libpython3.10 (>= 3.10.0), libreadline8 (>= 8), libsource-highlight4v5 (>= 3.1.9), libstdc++6 (>= 12), libtinfo6 (>= 6), libxxhash0 (>= 0.6.5), zlib1g (>= 1:1.2.0)
Recommends: libc-dbg
Suggests: gdb-doc, gdbserver
Conflicts: gdb
Conffiles:
/etc/gdb/gdbinit e030dc891a3af1f7779429b5c0554c98
Description: GNU Debugger
GDB is a source-level debugger, capable of breaking programs at
any specific line, displaying variable values, and determining
where errors occurred. Currently, gdb supports C, C++, D,
Objective-C, Fortran, Java, OpenCL C, Pascal, assembly, Modula-2,
Go, and Ada. A must-have for any serious programmer.
Original-Maintainer: Héctor Orón Martínez <zumbi@debian.org>
Homepage: https://www.gnu.org/s/gdb/
Package: gdisk
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 726
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.8-4build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 9), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
GPT fdisk (aka gdisk) is a text-mode partitioning
tool that provides utilities for Globally Unique
Identifier (GUID) Partition Table (GPT) disks.
.
Features:
.
- Edit GUID partition table definitions
- In place conversion of BSD disklabels to GPT
- In place conversion of MBR to GPT
- In place conversion of GPT to MBR
- Create hybrid MBR/GPT layouts
- Repair damaged GPT data structures
- Repair damaged MBR structures
- Back up GPT data to a file (and restore from file)
Original-Maintainer: Jonathan Carter <jcc@debian.org>
Homepage: http://sourceforge.net/projects/gptfdisk/
Package: geoip-database
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 10012
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20191224-3
Recommends: libgeoip1
Description: IP lookup command line tools that use the GeoIP library (country database)
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the free GeoLiteCountry database.
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: https://www.maxmind.com/
Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.21-4ubuntu4
Depends: libc6 (>= 2.34)
Description: GNU Internationalization utilities for the base system
This package includes the gettext and ngettext programs which allow
other packages to internationalize the messages given by shell scripts.
Homepage: https://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: gir1.2-glib-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 677
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.72.0-1
Provides: gir1.2-gio-2.0 (= 1.72.0-1), gir1.2-girepository-2.0 (= 1.72.0-1), gir1.2-gmodule-2.0 (= 1.72.0-1), gir1.2-gobject-2.0 (= 1.72.0-1)
Depends: libgirepository-1.0-1 (>= 1.72.0), libglib2.0-0 (>= 2.71.2)
Description: Introspection data for GLib, GObject, Gio and GModule
GObject Introspection is a project for providing machine readable
introspection data of the API of C libraries. This introspection
data can be used in several different use cases, for example
automatic code generation for bindings, API verification and documentation
generation.
.
GObject Introspection contains tools to generate and handle the
introspection data.
.
This package contains the introspection data for the GLib, GObject,
GModule and Gio libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection
Package: gir1.2-packagekitglib-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: packagekit
Version: 1.2.5-2ubuntu2
Depends: gir1.2-glib-2.0 (>= 1.36), libpackagekit-glib2-18 (>= 1.2.5)
Description: GObject introspection data for the PackageKit GLib library
PackageKit allows performing simple software management tasks over a DBus
interface e.g. refreshing the cache, updating, installing and removing
software packages or searching for multimedia codecs and file handlers.
.
This package contains introspection data for the PackageKit
GLib interface library.
.
It can be used by packages using the GIRepository format to generate
dynamic bindings.
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 18468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.34.1-1ubuntu1.10
Provides: git-completion, git-core
Depends: libc6 (>= 2.34), libcurl3-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.0), perl, liberror-perl, git-man (>> 1:2.34.1), git-man (<< 1:2.34.1-.)
Recommends: ca-certificates, patch, less, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
/etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides the git main components with minimal dependencies.
Additional functionality, e.g. a graphical user interface and revision
tree visualizer, tools for interoperating with other VCS's, or a web
interface, is provided as separate git* packages.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1958
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.34.1-1ubuntu1.10
Description: fast, scalable, distributed revision control system (manual pages)
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides reference documentation for use by the 'man'
utility and the 'git help' command.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 473
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Depends: dirmngr (<< 2.2.27-3ubuntu2.1.1~), dirmngr (>= 2.2.27-3ubuntu2.1), gnupg-l10n (= 2.2.27-3ubuntu2.1), gnupg-utils (<< 2.2.27-3ubuntu2.1.1~), gnupg-utils (>= 2.2.27-3ubuntu2.1), gpg (<< 2.2.27-3ubuntu2.1.1~), gpg (>= 2.2.27-3ubuntu2.1), gpg-agent (<< 2.2.27-3ubuntu2.1.1~), gpg-agent (>= 2.2.27-3ubuntu2.1), gpg-wks-client (<< 2.2.27-3ubuntu2.1.1~), gpg-wks-client (>= 2.2.27-3ubuntu2.1), gpg-wks-server (<< 2.2.27-3ubuntu2.1.1~), gpg-wks-server (>= 2.2.27-3ubuntu2.1), gpgsm (<< 2.2.27-3ubuntu2.1.1~), gpgsm (>= 2.2.27-3ubuntu2.1), gpgv (<< 2.2.27-3ubuntu2.1.1~), gpgv (>= 2.2.27-3ubuntu2.1)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.27-3ubuntu2.1), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the full suite of GnuPG tools for cryptographic
communications and data storage.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC 4880.
.
This package contains the translation files for the use of GnuPG in
non-English locales.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 787
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libreadline8 (>= 6.0), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
GnuPG is GNU's tool for secure communication and data storage.
.
This package contains several useful utilities for manipulating
OpenPGP data and other related cryptographic elements. It includes:
.
* addgnupghome -- create .gnupg home directories
* applygnupgdefaults -- run gpgconf --apply-defaults for all users
* gpgcompose -- an experimental tool for constructing arbitrary
sequences of OpenPGP packets (e.g. for testing)
* gpgparsemail -- parse an e-mail message into annotated format
* gpgsplit -- split a sequence of OpenPGP packets into files
* gpgtar -- encrypt or sign files in an archive
* kbxutil -- list, export, import Keybox data
* lspgpot -- convert PGP ownertrust values to GnuPG
* migrate-pubring-from-classic-gpg -- use only "modern" formats
* symcryptrun -- use simple symmetric encryption tool in GnuPG framework
* watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gnupg2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.2.27-3ubuntu2.1
Depends: gnupg (>= 2.2.27-3ubuntu2.1)
Description: GNU privacy guard - a free PGP replacement (dummy transitional package)
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This is a dummy transitional package that provides symlinks from gpg2
to gpg.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg (<< 2.1.21-4)
Depends: gpgconf (= 2.2.27-3ubuntu2.1), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Breaks: gnupg (<< 2.1.21-4)
Description: GNU Privacy Guard -- minimalist public key operations
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains /usr/bin/gpg itself, and is useful on its own
only for public key operations (encryption, signature verification,
listing OpenPGP certificates, etc). If you want full capabilities
(including secret key operations, network access, etc), please
install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.2.27-3ubuntu2.1), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
/etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
/etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the agent program gpg-agent which handles all
secret key material for OpenPGP and S/MIME use. The agent also
provides a passphrase cache, which is used by pre-2.1 versions of
GnuPG for OpenPGP operations. Without this package, trying to do
secret-key operations with any part of the modern GnuPG suite will
fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Depends: dirmngr (= 2.2.27-3ubuntu2.1), gpg (= 2.2.27-3ubuntu2.1), gpg-agent (= 2.2.27-3ubuntu2.1), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Description: GNU privacy guard - Web Key Service client
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package provides the GnuPG client for the Web Key Service
protocol.
.
A Web Key Service is a service that allows users to upload keys per
mail to be verified over https as described in
https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
.
For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpg-wks-server
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Depends: gpg (= 2.2.27-3ubuntu2.1), gpg-agent (= 2.2.27-3ubuntu2.1), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Description: GNU privacy guard - Web Key Service server
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package provides the GnuPG server for the Web Key Service
protocol.
.
A Web Key Service is a service that allows users to upload keys per
mail to be verified over https as described in
https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
.
For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
GnuPG is GNU's tool for secure communication and data storage.
.
This package contains core utilities used by different tools in the
suite offered by GnuPG. It can be used to programmatically edit
config files for tools in the GnuPG suite, to launch or terminate
per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 480
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg2 (<< 2.1.10-2)
Depends: gpgconf (= 2.2.27-3ubuntu2.1), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.6.0), libreadline8 (>= 6.0)
Recommends: gnupg (= 2.2.27-3ubuntu2.1)
Breaks: gnupg2 (<< 2.1.10-2)
Description: GNU privacy guard - S/MIME version
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the gpgsm program. gpgsm is a tool to provide
digital encryption and signing services on X.509 certificates and the
CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.1
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
.
gpgv is actually a stripped-down version of gpg which is only able
to check signatures. It is somewhat smaller than the fully-blown gpg
and uses a different (and simpler) way to check that the public keys
used to make the signature are valid. There are no configuration
files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 496
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.7-1build1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.34), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
'grep' is a utility to search for text in files; it can be used from the
command line or in scripts. Even if you don't want to use it, other packages
on your system probably will.
.
The GNU family of grep utilities may be the "fastest grep in the west".
GNU grep is based on a fast lazy-state deterministic matcher (about
twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
search for a fixed string that eliminates impossible text from being
considered by the full regexp matcher without necessarily having to
look at every character. The result is typically many times faster
than Unix grep or egrep. (Regular expressions containing backreferencing
will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://www.gnu.org/software/grep/
Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3444
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.4-8build1
Depends: libc6 (>= 2.35), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1)
Suggests: groff
Conffiles:
/etc/groff/man.local e6591616404c7c443f71ff21d27430d7
/etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
This package contains the traditional UN*X text formatting tools
troff, nroff, tbl, eqn, and pic. These utilities, together with the
man-db package, are essential for displaying the on-line manual pages.
.
groff-base is a stripped-down package containing the necessary components
to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
device (groff's default). Users who want a full groff installation, with
the standard set of devices, fonts, macros, and documentation, should
install the groff package.
Homepage: https://www.gnu.org/software/groff/
Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 13836
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), libfreetype6 (>= 2.2.1), libfuse3-3 (>= 3.2.3), liblzma5 (>= 5.1.1alpha+20120614), debconf (>= 0.5) | debconf-2.0, gettext-base, lsb-base (>= 3.0-6)
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conflicts: init-select
Conffiles:
/etc/default/grub.d/init-select.cfg 86dea2a78312ca80f740098987d9c0fb
/etc/grub.d/00_header 45fa2922d33747051f7c4851c47d5433
/etc/grub.d/05_debian_theme 7af00bf2d834b3104688c9cbf40b23b3
/etc/grub.d/10_linux 87616b972cb05affb4bf070fbbeb0ba8
/etc/grub.d/10_linux_zfs 4d36031aeaefd045f9fb5cddc286d626
/etc/grub.d/20_linux_xen 377fd624ba5c0271364d47efed2c683f
/etc/grub.d/30_os-prober b42d75841ee60a0715198a276452da89
/etc/grub.d/30_uefi-firmware ed41aff510f9176cdbbecfe1a964e4c5
/etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
/etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4
/etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
/etc/init.d/grub-common 561b38cf0171ef9aa41954dad9ec6b3c
/etc/pm/sleep.d/10_grub-common bc63b0c6613e95979446d17a88875d6a
Description: GRand Unified Bootloader (common files)
This package contains common files shared by the distinct flavours of GRUB.
It is shared between GRUB Legacy and GRUB 2, although a number of files
specific to GRUB 2 are here as long as they do not break GRUB Legacy.
.
grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
xorriso.
Built-Using: lzo2 (= 2.10-2build3)
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Package: grub-gfxpayload-lists
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 47
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: amd64
Version: 0.7
Depends: grub-pc (>= 1.99~20101210-1ubuntu2)
Description: GRUB gfxpayload blacklist
The 'set gfxpayload=keep' facility in GRUB provides smooth graphical
handover to the Linux kernel. Unfortunately, this does not work on all
systems, resulting in a black or corrupt display. This package provides a
blacklist of PCI IDs which fail.
.
We maintain this separately from GRUB because it is likely to be updated on
a different schedule.
Package: grub-legacy-ec2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:1ubuntu2
Depends: debconf (>= 1.5.19) | cdebconf, ucf, debconf (>= 0.5) | debconf-2.0
Suggests: grub-legacy-doc
Conflicts: grub
Conffiles:
/etc/kernel/postinst.d/x-grub-legacy-ec2 48dc1f918172fc12627b12e2dbc6ce31
/etc/kernel/postrm.d/x-grub-legacy-ec2 e3e7d01340b454f90aaebfb48e478078
/etc/kernel/kernel/postrm.d/x-grub-legacy-ec2 e3e7d01340b454f90aaebfb48e478078 obsolete
/etc/kernel/kernel/postinst.d/x-grub-legacy-ec2 48dc1f918172fc12627b12e2dbc6ce31 obsolete
Description: Handles update-grub for ec2 instances
EC2 instances that use grub-legacy as a bootloader need a way to keep
/boot/grub/menu.lst up to date while not conflicting with grub-pc.
This package provides that.
Package: grub-pc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 561
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub2 (<< 2.06-2ubuntu7.2)
Depends: debconf (>= 0.5) | debconf-2.0, grub-common (= 2.06-2ubuntu7.2), grub2-common (= 2.06-2ubuntu7.2), grub-pc-bin (= 2.06-2ubuntu7.2), ucf, grub-gfxpayload-lists
Conflicts: grub (<< 0.97-54), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-xen
Description: GRand Unified Bootloader, version 2 (PC/BIOS version)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This is a dependency package for a version of GRUB that has been built for
use with the traditional PC/BIOS architecture. Installing this package
indicates that this version of GRUB should be the active boot loader.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.06-2ubuntu7.2)
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.06-2ubuntu7.2)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS modules)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This package contains GRUB modules that have been built for use with the
traditional PC/BIOS architecture. It can be installed in parallel with
other flavours, but will not automatically install GRUB as the active boot
loader nor automatically update grub.cfg on upgrade unless grub-pc is also
installed.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7)
Depends: grub-common (= 2.06-2ubuntu7.2), dpkg (>= 1.15.4) | install-info, libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conflicts: grub-legacy
Conffiles:
/etc/kernel/postinst.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
/etc/kernel/postrm.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
Description: GRand Unified Bootloader (common files for version 2)
This package contains common files shared by the distinct flavours of GRUB.
The files in this package are specific to GRUB 2, and would break GRUB
Legacy if installed on the same system.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Package: gsettings-desktop-schemas
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 42.0-1ubuntu1
Depends: dconf-gsettings-backend | gsettings-backend, session-migration
Breaks: gnome-control-center (<< 1:3.19.92), gnome-settings-daemon (<< 3.19.92), gnome-shell (<< 40), mutter (<< 3.31.4), nautilus (<< 3.7.92)
Description: GSettings desktop-wide schemas
gsettings-desktop-schemas contains a collection of GSettings schemas for
settings shared by various components of a desktop.
Homepage: https://www.gnome.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: gtk-update-icon-cache
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.57.2)
Breaks: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Description: icon theme caching utility
gtk-update-icon-cache creates mmap()able cache files for icon themes.
.
GTK can use the cache files created by gtk-update-icon-cache to avoid a lot
of system call and disk seek overhead when the application starts. Since the
format of the cache files allows them to be mmap()ed shared between multiple
applications, the overall memory consumption is reduced as well.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.10-4ubuntu4.1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.34)
Suggests: less
Description: GNU compression utilities
This package provides the standard GNU file compression utilities, which
are also the default compression tools for Debian. They typically operate
on files with names ending in '.gz', but can also decompress files ending
in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/
Original-Maintainer: Milan Kupcevic <milan@debian.org>
Package: hdparm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 9.60+ds-1build3
Depends: libc6 (>= 2.34), lsb-base
Recommends: powermgmt-base
Conffiles:
/etc/hdparm.conf fe09abd1838cf3e012353933c5aa0dda
Description: tune hard disk parameters for high performance
Get/set device parameters for Linux SATA/IDE drives.
Provides a command line interface to various kernel interfaces supported by
the Linux SATA/PATA/SAS "libata" subsystem and the older IDE driver subsystem.
Many newer (2008 and later) USB drive enclosures now also support "SAT"
(SCSI-ATA Command Translation) and therefore may also work with hdparm.
Original-Maintainer: Alexandre Mestiashvili <mestia@debian.org>
Homepage: http://sourceforge.net/projects/hdparm/
Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.17-2
Description: default fallback theme for FreeDesktop.org icon themes
This is the default fallback theme used by implementations of the
Freedesktop.org Icon Theme specification.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.23ubuntu2
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Conffiles:
/etc/init/hostname.conf 2521555e6850a6ee2461a4444b4c1d0d obsolete
/etc/init/hostname.sh.conf 5fd24ea35befe5d66bf8ff80b612e3f2 obsolete
Description: utility to set/show the host name or domain name
This package provides commands which can be used to display the system's
DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Michael Meskes <meskes@debian.org>
Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.5-7build2
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtinfo6 (>= 6)
Suggests: lm-sensors, lsof, strace
Description: interactive processes viewer
Htop is an ncursed-based process viewer similar to top, but it
allows one to scroll the list vertically and horizontally to see
all processes and their full command lines.
.
Tasks related to processes (killing, renicing) can be done without
entering their PIDs.
Original-Maintainer: Daniel Lange <DLange@debian.org>
Homepage: https://htop.dev/
Package: humanity-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 20660
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.6.16
Depends: adwaita-icon-theme, hicolor-icon-theme
Description: Humanity Icon theme
Humanity and Humanity Dark are nice and well polished icon themes for
the GNOME desktop.
Package: ifenslave
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.10ubuntu3
Depends: ifupdown (>= 0.7.46), iproute2
Recommends: net-tools
Conffiles:
/etc/network/if-post-down.d/ifenslave 81231ab126e4c8a6648f5c3d08e04338
/etc/network/if-pre-up.d/ifenslave fef475043d232377b0076ff05b58bd62
/etc/network/if-up.d/ifenslave 99bc91ff12abf6ca3dfd74eaf2af1c61
Description: configure network interfaces for parallel routing (bonding)
This is a tool to attach and detach slave network interfaces to a bonding
device. A bonding device will act like a normal Ethernet network device to
the kernel, but will send out the packets via the slave devices using a simple
round-robin scheduler. This allows for simple load-balancing, identical to
"channel bonding" or "trunking" techniques used in switches.
.
The kernel must have support for bonding devices for ifenslave to be useful.
This package supports 2.6.x kernels and the recent 3.x.x kernels.
Original-Maintainer: Guus Sliepen <guus@debian.org>
Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.8.36+nmu1ubuntu3.1
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.34), lsb-base, adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
/etc/default/networking 3f34a1868c2e6cd41caec70c8d1e5659
/etc/init.d/networking 7da483bff1848d6eb99e22c415a9ff27
/etc/network/if-down.d/resolved 75d1127782e82fc55e3c6ba8363874b9
/etc/network/if-up.d/resolved 1cb9939739ffcc32d0a3771a72d5efec
Description: high level tools to configure network interfaces
This package provides the tools ifup and ifdown which may be used to
configure (or, respectively, deconfigure) network interfaces based on
interface definitions in the file /etc/network/interfaces.
Original-Maintainer: Josué Ortega <josue@debian.org>
Package: info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 849
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.8-4build1
Replaces: texinfo (<< 4.7-2), texinfo-doc-nonfree
Provides: info-browser
Depends: libc6 (>= 2.34), libtinfo6 (>= 6), install-info
Breaks: texinfo-doc-nonfree
Description: Standalone GNU Info documentation browser
The Info file format is an easily-parsable representation for online
documents. This program allows you to view Info documents, like the
ones stored in /usr/share/info.
.
Much of the software in Debian comes with its online documentation in
the form of Info files, so it is most likely you will want to install it.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Homepage: https://www.gnu.org/software/texinfo/
Package: init
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 22
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.62
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv
Description: metapackage ensuring an init system is installed
This package is a metapackage which allows you to select from the available
init systems while ensuring that one of these is available on the system at
all times.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Important: yes
Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 133
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.62
Depends: perl-base (>= 5.20.1-3)
Conflicts: file-rc (<< 0.8.17~)
Description: helper tools for all init systems
This package contains helper tools that are necessary for switching between
the various init systems that Debian contains (e. g. sysvinit or
systemd). An example is deb-systemd-helper, a script that enables systemd unit
files without depending on a running systemd.
.
It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
provide an abstraction for enabling, disabling, starting, and stopping
services for all supported Debian init systems as specified by the policy.
.
While this package is maintained by pkg-systemd-maintainers, it is NOT
specific to systemd at all. Maintainers of other init systems are welcome to
include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: initramfs-tools
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.140ubuntu13.4
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.140ubuntu13.4), linux-base
Suggests: bash-completion
Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), netplan.io (<< 0.37), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
/etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
/etc/kernel/postinst.d/initramfs-tools c1cb0e052a2cdeef4f3257585c83c58d
/etc/kernel/postrm.d/initramfs-tools e7471d253a5b24e2fd85b40be4e43218
Description: generic modular initramfs generator (automation)
This package builds a bootable initramfs for Linux kernel packages. The
initramfs is loaded along with the kernel and is responsible for
mounting the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: initramfs-tools-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: initramfs-tools
Version: 0.140ubuntu13.4
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libudev1 (>= 183)
Description: binaries used by initramfs-tools
This package contains binaries used inside the initramfs images generated
by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: initramfs-tools-core
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 275
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.140ubuntu13.4
Replaces: initramfs-tools (<< 0.121~)
Depends: busybox-initramfs (>= 1:1.30.1-4ubuntu5~), initramfs-tools-bin (= 0.140ubuntu13.4), klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), zstd, kmod, udev, coreutils (>= 8.24), logsave | e2fsprogs (<< 1.45.3-1~)
Suggests: bash-completion
Breaks: busybox-initramfs (<< 1:1.30.1-4ubuntu5~), initramfs-tools (<< 0.121~)
Conffiles:
/etc/initramfs-tools/initramfs.conf 928db4c3f5c9c61d79ce5ae9c2e1476a
Description: generic modular initramfs generator (core tools)
This package contains the mkinitramfs program that can be used to
create a bootable initramfs for a Linux kernel. The initramfs should
be loaded along with the kernel and is then responsible for mounting
the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: initscripts
Status: deinstall ok config-files
Priority: required
Section: admin
Installed-Size: 169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.3ubuntu2
Config-Version: 2.88dsf-59.3ubuntu2
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), systemd (<< 228-5ubuntu3), util-linux (<< 2.26.2-4~), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
/etc/init.d/bootmisc.sh b1cc3129e3045bb60bd18d99c5dc1357
/etc/init.d/checkfs.sh fb72965ae6e43424c01b0d9d5b43d985
/etc/init.d/checkroot.sh 74896125b097dfbfc0d0e15d2d04f20c
/etc/init.d/checkroot-bootclean.sh f968128c0fc7bc81433e71eec88e30ff
/etc/init.d/halt a0e668699f774d928ddc62954155adb5
/etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
/etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
/etc/init.d/mountall.sh 5137a3cd0ad998c4e548c9d6bde8b672
/etc/init.d/mountall-bootclean.sh 3e159968f2cd0fd8f6fb8d0e606b1ea4
/etc/init.d/mountnfs.sh e6d04d2e3ac6f728baa3ca6c0eeb8006
/etc/init.d/mountnfs-bootclean.sh 88b09d2279260128d40cbe314bff1b6d
/etc/init.d/mountdevsubfs.sh 55612432fe9994baa8ad5a6776fb6af1
/etc/init.d/mountkernfs.sh aed61dc8fffc89d6cbd518d4ad986518
/etc/init.d/ondemand e1841131a99266c6376839f7c1edc021
/etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
/etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
/etc/init.d/sendsigs 7e940b6c8a108a5beb2f51262ec9195c
/etc/init.d/single bc7e38f0849ebfe767d162861fae002c
/etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
/etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
/etc/init.d/umountroot 871c0eb052da52d66d4a9b26efb8c7c8
/etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
/etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
/etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
/etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
Description: scripts for initializing and shutting down the system
The scripts in this package initialize a standard Debian
system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Package: insserv
Status: deinstall ok config-files
Priority: required
Section: misc
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.14.0-5ubuntu3
Config-Version: 1.14.0-5ubuntu3
Depends: libc6 (>= 2.14)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
/etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
/etc/insserv.conf 3e9467113029a6356f57842085f3c849
Description: boot sequence organizer using LSB init.d script dependency information
The insserv program is used by the standard SysV-based init system. It
updates the order of symlinks in /etc/rc?.d/ based on dependencies
specified by LSB headers in the init.d scripts themselves.
.
These declared relations between scripts make it possible to optimize
the boot sequence for the currently installed set of packages, while
detecting and rejecting dependency loops.
.
Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Petter Reinholdtsen <pere@debian.org>
Package: install-info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 257
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.8-4build1
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.34)
Pre-Depends: dpkg (>= 1.16.1)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Description: Manage installed documentation in info format
The install-info utility creates the index of all installed documentation
in info format and makes it available to info readers.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Homepage: https://www.gnu.org/software/texinfo/
Package: installation-report
Status: deinstall ok config-files
Priority: optional
Section: misc
Installed-Size: 48
Maintainer: Ubuntu Installer Team <ubuntu-installer@lists.ubuntu.com>
Architecture: all
Version: 2.62ubuntu1
Config-Version: 2.62ubuntu1
Depends: debconf
Recommends: pciutils
Description: system installation report
This package contains instructions and programs for reporting on
the installation of a new system. It can help you fill out an
installation report and send it to the Debian bug tracking system.
.
Purging this package will remove the logs of the system's installation.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: intel-microcode
Status: install ok installed
Priority: standard
Section: non-free/admin
Installed-Size: 12208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20231114.0ubuntu0.22.04.1
Depends: iucode-tool (>= 1.0)
Recommends: initramfs-tools (>= 0.113~)
Conflicts: microcode.ctl (<< 0.18~0)
Conffiles:
/etc/default/intel-microcode 6a68a0e6e2d2ef001f1a374ece3c8558
/etc/kernel/preinst.d/intel-microcode 4324b7d12701909b3a76bb5c6468a571
/etc/modprobe.d/intel-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for Intel CPUs
This package contains updated system processor microcode for
Intel i686 and Intel X86-64 processors. Intel releases microcode
updates to correct processor behavior as documented in the
respective processor specification updates.
.
For AMD processors, please refer to the amd64-microcode package.
Homepage: https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2880
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.15.0-1ubuntu2
Replaces: iproute
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf0 (>= 1:0.2), libbsd0 (>= 0.0), libc6 (>= 2.34), libcap2 (>= 1:2.10), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Recommends: libatm1 (>= 2.4.1-17~)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
/etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
/etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece
/etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
/etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2
/etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
/etc/iproute2/rt_protos 35b7f1673d1d0486c4188fd06b46a410
/etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312
/etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
/etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
/etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
/etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431
Description: networking and traffic control tools
The iproute2 suite is a collection of utilities for networking and
traffic control.
.
These tools communicate with the Linux kernel via the (rt)netlink
interface, providing advanced features not available through the
legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Package: iptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2837
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.7-1ubuntu5.1
Replaces: iptables-nftables-compat (<< 1.6.2~)
Depends: libip4tc2 (= 1.8.7-1ubuntu5.1), libip6tc2 (= 1.8.7-1ubuntu5.1), libxtables12 (= 1.8.7-1ubuntu5.1), netbase (>= 6.0), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0, libnftnl11 (>= 1.1.5)
Suggests: firewalld, kmod, nftables
Breaks: iptables-nftables-compat (<< 1.6.2~)
Description: administration tools for packet filtering and NAT
The iptables/xtables framework has been replaced by nftables. You should
consider migrating now.
.
iptables is the userspace command line program used to configure
the Linux packet filtering and NAT ruleset. It is targeted towards systems
and networks administrators.
.
This package contains several different utilities, the most important ones:
.
iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version)
.
iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version)
.
ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version)
.
ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy version)
.
arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version)
.
ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version)
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20211215-1
Provides: ping
Depends: libcap2-bin, libc6 (>= 2.34), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Description: Tools to test the reachability of network hosts
The ping command sends ICMP ECHO_REQUEST packets to a host in order to
test if the host is reachable via the network.
.
This package includes a ping6 utility which supports IPv6 network
connections.
Original-Maintainer: Noah Meyerhans <noahm@debian.org>
Homepage: https://github.com/iputils/iputils/
Package: iputils-tracepath
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20211215-1
Depends: libc6 (>= 2.34)
Suggests: traceroute
Description: Tools to trace the network path to a remote host
The tracepath utility is similar to the traceroute utility, but also
attempts to discover the MTU of the path. Supports IPv4 and IPv6.
Original-Maintainer: Noah Meyerhans <noahm@debian.org>
Homepage: https://github.com/iputils/iputils/
Package: irqbalance
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.8.0-1ubuntu0.2
Depends: libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libglib2.0-0 (>= 2.35.8), libncursesw6 (>= 6), libnuma1 (>= 2.0.11), libsystemd0, libtinfo6 (>= 6)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
/etc/default/irqbalance 36e64b919c5778f81128d01a0cf29014
/etc/init.d/irqbalance fcb4a4d3f2770082bcbf0f3dc899b70c
Description: Daemon to balance interrupts for SMP systems
Daemon to balance interrupts across multiple CPUs, which can lead to better
performance and IO balance on SMP systems. This package is especially useful
on systems with multi-core processors, as interrupts will typically only be
serviced by the first core.
.
Note: irqbalance is not useful if you don't have more than one CPU core.
Homepage: https://github.com/Irqbalance/irqbalance
Original-Maintainer: Paride Legovini <paride@debian.org>
Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 673
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.1-2.3ubuntu2.4
Provides: dhcp-client
Depends: libc6 (>= 2.34), libdns-export1110, libisc-export1105, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
/etc/apparmor.d/sbin.dhclient a613b9bc67bb3c77dc2071cdf205c1b1
/etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
/etc/dhcp/dhclient-enter-hooks.d/resolved-enter 4ecfd14e38e7362cd6aeb3e438c2ec43
/etc/dhcp/dhclient-exit-hooks.d/resolved 12e194a7c3bdde03d4a444c05061b69e
/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
/etc/dhcp/dhclient.conf c3b6c3271031ab8e250a192f4eb18695
Description: DHCP client for automatically obtaining an IP address
This is the Internet Software Consortium's DHCP client.
.
Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
(actually dhcpd includes much of the functionality of bootpd). It
gives client machines "leases" for IP addresses and can
automatically set their network configuration. If your machine
depends on DHCP (especially likely if it's a workstation on a large
network, or a laptop, or attached to a cable modem), keep this or
another DHCP client installed.
.
Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>
Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.1-2.3ubuntu2.4
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
This package includes manpages that are relevant to the various ISC DHCP
packages.
.
The dhcp-options manpage describes available options for dhcpd and dhclient.
The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>
Package: iso-codes
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 19769
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.9.0-1
Suggests: isoquery
Description: ISO language, territory, currency, script codes and their translations
This package provides the ISO 639, ISO 639-3, and ISO 639-5 language
code lists, the ISO 4217 currency code list, the ISO 3166 territory
code list, the ISO 3166-2 sub-territory list, and the ISO 15924
script code list as JSON files.
.
More importantly, it also provides their translations to be used by
other programs.
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Homepage: https://salsa.debian.org/iso-codes-team/iso-codes
Package: iucode-tool
Status: install ok installed
Priority: optional
Section: contrib/utils
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.3.1-1build1
Depends: libc6 (>= 2.34)
Recommends: intel-microcode (>= 1)
Description: Intel processor microcode tool
iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
microcode collections, and to use the kernel facilities to upgrade the
microcode on Intel system processors.
.
It can load microcode data files in text and binary format, sort, list and
filter the microcodes contained in these files, write selected microcodes to a
new file in binary format, or upload them to the kernel.
.
It operates on non-free microcode data downloaded directly from Intel or
installed by the intel-microcode package.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Homepage: https://gitlab.com/iucode-tool
Package: iw
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 298
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.16-1build1
Depends: libc6 (>= 2.34), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7)
Recommends: wireless-regdb
Description: tool for configuring Linux wireless devices
This package contains the 'iw' command line tool which allows to configure and
show information about wireless devices.
.
iw is based on the nl80211 kernel interface and supports the majority of
fairly recent hardware. The old tool iwconfig, which uses Wireless Extensions
interface, is deprecated and it is strongly recommended to switch to iw and
nl80211.
Homepage: https://wireless.wiki.kernel.org/en/users/documentation/iw
Original-Maintainer: Paride Legovini <paride@debian.org>
Package: javascript-common
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 11+nmu1
Suggests: apache2 (>= 2.4.6~) | lighttpd | httpd
Conffiles:
/etc/apache2/conf-available/javascript-common.conf 133aafb01e900b05e75042fd47dec067
/etc/lighttpd/conf-available/90-javascript-alias.conf 568434a47d89bb89ecf81c8f9c4e1669
Description: Base support for JavaScript library packages
Web applications that use JavaScript need to distribute it through HTTP. Using
a common path for every script avoids the need to enable this path in the HTTP
server for every package.
.
This is a helper package that creates /usr/share/javascript and enables it in
the Apache and Lighttpd webserver.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: jsonlint
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.8.3-2
Depends: php-cli, php-common
Description: validating parser of JSON data structures
JSON (JavaScript Object Notation) is a lightweight data-interchange
format. It is easy for humans to read and write. It is easy for
machines to parse and generate. It is based on a subset of the
JavaScript Programming Language. JSON is a text format that is
completely language independent but uses conventions that are familiar
to programmers of the C-family of languages. These properties make JSON
an ideal data-interchange language.
.
This package provides jsonlint-php, a validating parser of JSON files.
Another more complete JSON syntax validator and formatter tool is
provided by the python-demjson package.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/Seldaek/jsonlint
Package: kbd
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.3.0-3ubuntu4.22.04
Provides: console-utilities
Depends: libc6 (>= 2.34), console-setup | console-setup-mini
Conflicts: console-utilities
Description: Linux console font and keytable utilities
This package allows you to set up the Linux console, change the font,
resize text mode virtual consoles and remap the keyboard.
.
You will probably want to install a set of data files, such as the one
in the “console-setup” package.
Homepage: http://www.kbd-project.org/
Original-Maintainer: Console utilities maintainers <pkg-kbd-devel@lists.alioth.debian.org>
Package: keyboard-configuration
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 842
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.205ubuntu3
Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47)
Depends: liblocale-gettext-perl
Pre-Depends: debconf (>= 1.5.34)
Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47)
Description: system-wide keyboard preferences
This package maintains the keyboard preferences in
/etc/default/keyboard. Other packages can use the information
provided by this package in order to configure the keyboard on the
console or in X Window.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: keyutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.6.1-2ubuntu3
Depends: libc6 (>= 2.34), libkeyutils1 (>= 1.6.1)
Conffiles:
/etc/request-key.conf bf33ebef2dd99b739d06c67976d549fd
Description: Linux Key Management Utilities
Keyutils is a set of utilities for managing the key retention facility in the
kernel, which can be used by filesystems, block devices and more to gain and
retain the authorization and encryption keys required to perform secure
operations.
Homepage: https://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>
Package: klibc-utils
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 547
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: klibc
Version: 2.0.10-4
Depends: libklibc (= 2.0.10-4)
Breaks: initramfs-tools (<< 0.123~)
Description: small utilities built with klibc for early boot
This package contains a collection of programs that are linked
against klibc. These duplicate some of the functionality of a
regular Linux toolset, but are typically much smaller than their
full-function counterparts. They are intended for inclusion in
initramfs images and embedded systems.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 29-1ubuntu1
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0), libkmod2 (= 29-1ubuntu1), lsb-base
Conffiles:
/etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
/etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
/etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
/etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
/etc/modprobe.d/blacklist-framebuffer.conf 097e2142ae3e4dd2911eda7844ce0c18
/etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
/etc/modprobe.d/blacklist.conf 75f90164fe53985db48e7aa168bd5e7c
/etc/modprobe.d/iwlwifi.conf f27bc645e93e20c8e532325d190ac8ee
/etc/modprobe.d/blacklist-watchdog.conf 55327f9270c8a6257a833c4d127a39e1 obsolete
Description: tools for managing Linux kernel modules
This package contains a set of programs for loading, inserting, and
removing kernel modules for Linux.
It replaces module-init-tools.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: kpartx
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: multipath-tools
Version: 0.8.8-1ubuntu1.22.04.3
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), udev, dmsetup
Description: create device mappings for partitions
Kpartx can be used to set up device mappings for the partitions of any
partitioned block device.
.
It is part of the Linux multipath-tools, but is useful on any
device-mapper using system.
Homepage: http://christophe.varoqui.free.fr/
Original-Maintainer: Debian DM Multipath Team <team+linux-blocks@tracker.debian.org>
Package: krb5-locales
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.19.2-2ubuntu0.3
Description: internationalization support for MIT Kerberos
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: landscape-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 402
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: landscape-client
Version: 19.12-0ubuntu13
Depends: python3:any, debconf (>= 0.5) | debconf-2.0, python3-twisted, python3-configobj, python3-apt, ca-certificates, python3-gdbm, python3-netifaces, lsb-release, lsb-base, adduser, bc, lshw, libpam-modules
Description: Landscape administration system client - Common files
Landscape is a web-based tool for managing Ubuntu systems. This
package is necessary if you want your machine to be managed in a
Landscape account.
.
This package provides the core libraries, as well as the landscape-sysinfo
command. It also sets up the landscape user, landscape directories, and the
hook that runs landscape-sysinfo on startup.
Homepage: https://github.com/CanonicalLtd/landscape-client
Original-Maintainer: Landscape Team <landscape-team@canonical.com>
Package: language-pack-en
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 9
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20230801
Replaces: language-pack-en (<< 1:22.04+20230801), language-pack-en-base, language-pack-gnome-en (<< 1:22.04+20230801), language-pack-gnome-en-base (<< 1:22.04+20230801), language-pack-kde-en (<< 1:22.04+20230801), language-pack-kde-en-base (<< 1:22.04+20230801)
Depends: language-pack-en-base (>= 1:22.04+20230801)
Pre-Depends: dpkg (>= 1.16.1)
Description: translation updates for language English
Translation data updates for all supported packages for:
English
.
language-pack-en-base provides the bulk of translation data
and is updated only seldom. This package provides frequent translation
updates.
Package: language-pack-en-base
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 3758
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20230801
Replaces: language-pack-en (<< 1:22.04+20230801), language-pack-en-base (<< 1:22.04+20230801), language-pack-gnome-en (<< 1:22.04+20230801), language-pack-gnome-en-base (<< 1:22.04+20230801), language-pack-kde-en (<< 1:22.04+20230801), language-pack-kde-en-base (<< 1:22.04+20230801)
Depends: locales (>= 2.3.6), language-pack-en (>= 1:22.04+20230801)
Pre-Depends: dpkg (>= 1.16.1)
Conflicts: language-pack-en (<< 1:22.04+20230801)
Description: translations for language English
Translation data for all supported packages for:
English
.
This package provides the bulk of translation data and is updated
only seldom. language-pack-en provides frequent
translation updates, so you should install this as well.
Package: language-selector-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: language-selector
Version: 0.219.1
Depends: python3:any, iso-codes, python3-apt (>= 0.7.12.0), python3-dbus, dbus, accountsservice (>= 0.6.29-1ubuntu6)
Pre-Depends: dpkg (>= 1.15.7.2)
Conffiles:
/etc/dbus-1/system.d/com.ubuntu.LanguageSelector.conf 4ae68aecbcfad1f92f7fb0a3305edf44
/etc/fonts/conf.avail/30-cjk-aliases.conf a8c1e3ddb3c01a1974cd6ba8510277ca
/etc/fonts/conf.avail/56-language-selector-ar.conf 0b8aa447c54e475fb91e62c0ac9c6b43
/etc/fonts/conf.avail/64-language-selector-prefer.conf cc31aa3df0ce53568b31ae984355971b
/etc/fonts/conf.avail/69-language-selector-ja.conf 5e3ed378ccff2697a48b0521fdc8bd4d
/etc/fonts/conf.avail/69-language-selector-zh-cn.conf 213c5fccbf5f3ee348f993f085c8d99e
/etc/fonts/conf.avail/69-language-selector-zh-hk.conf 8c960c5bcfb26f6f058902bf0b07cf00
/etc/fonts/conf.avail/69-language-selector-zh-mo.conf ae322c10c54d609bc37bed17c11cd32b
/etc/fonts/conf.avail/69-language-selector-zh-sg.conf eb0cdda5f96e73c75446af7f8676d494
/etc/fonts/conf.avail/69-language-selector-zh-tw.conf a981e8a61314aeb753c11d6c72d80cd9
/etc/fonts/conf.avail/99-language-selector-zh.conf bcbe0b7ba747248475e9413184103a2c
/etc/profile.d/cedilla-portuguese.sh eb7a23efe066237e69ad812ad771873c
Description: Language selector for Ubuntu
This package let you change and install language packs
in Ubuntu.
.
This package contains the common part of language-selector
Package: laptop-detect
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.16
Recommends: dmidecode
Description: system chassis type checker
This package provides a simple shell script which attempts to determine
whether it is being run on a laptop (or similar portable machine). It is
mainly useful for installers.
Original-Maintainer: Simó Albert i Beltran <sim6@probeta.net>
Homepage: https://gitlab.com/debiants/laptop-detect
Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 321
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 590-1ubuntu0.22.04.1
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
This package provides "less", a file pager (that is, a memory-efficient
utility for displaying text one screenful at a time). Less has many
more features than the basic pager "more". As part of the GNU project,
it is widely regarded as the standard pager on UNIX-derived systems.
.
Also provided are "lessecho", a simple utility for ensuring arguments
with spaces are correctly quoted; "lesskey", a tool for modifying the
standard (vi-like) keybindings; and "lesspipe", a filter for specific
types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/
Original-Maintainer: Milan Kupcevic <milan@debian.org>
Package: libaccountsservice0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: accountsservice
Version: 22.07.5-2ubuntu1.4
Depends: libc6 (>= 2.4), libcrypt1 (>= 1:4.1.0), libglib2.0-0 (>= 2.63.5), libsystemd0 (>= 209)
Breaks: accountsservice (<< 0.6.5)
Description: query and manipulate user account information - shared libraries
The AccountService project provides a set of D-Bus
interfaces for querying and manipulating user account
information and an implementation of these interfaces,
based on the useradd, usermod and userdel commands.
.
This package provides the shared libraries of the
AccountService library.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.3.1-1
Depends: libc6 (>= 2.33)
Description: access control list - shared library
This package contains the shared library containing the POSIX 1003.1e
draft standard 17 functions for manipulating access control lists.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/acl/
Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.112-13build1
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
This library enables userspace to use Linux kernel asynchronous I/O
system calls, important for the performance of databases and other
advanced applications.
.
This package contains the shared library.
Homepage: https://pagure.io/libaio
Original-Maintainer: Guillem Jover <guillem@debian.org>
Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.201-1
Depends: perl:any
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
Algorithm::Diff is a Perl module that allows users to analyze text based on a
Longest Common Subsequence (LCS) algorithm. It can compare two files and find
the differences between them, which can produce the same information as the
common Unix tool 'diff'.
.
There is an XS-optimized implementation of the core loop, which accelerates
some types of diff output (see libalgorithm-diff-xs-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Diff
Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-6build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
excellent but not very well-known Algorithm::LCS module, with a drop-in
interface identical to Algorithm::Diff.
.
Note that only the LCSidx function is optimized in XS at the moment, which
means only compact_diff will get significantly faster for large data sets,
while diff and sdiff will run in identical speed as Algorithm::Diff.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Diff-XS
Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.08-3
Depends: perl, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
Algorithm::Merge provides three-way merge and diff functions, complementing
the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
three sets of items, known as the original, left and right, this module can
take a three-way difference or merge them. Taking a difference provides an
array reference that is very similar to the behaviour of Algorithm::Diff. One
can also implement custom conflict resolution using the CONFLICT callback.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Merge
Package: libapache2-mod-php7.0
Status: deinstall ok config-files
Priority: optional
Section: httpd
Installed-Size: 4179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: libapache2-mod-php, phpapi-20151012
Depends: libmagic1, mime-support, php7.0-cli, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), php7.0-json, php7.0-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libc6 (>= 2.15), libpcre3, libssl1.0.0 (>= 1.0.2~beta3), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conflicts: libapache2-mod-php5 (<< 5.6.16+dfsg-4~), libapache2-mod-php5filter (<< 5.6.16+dfsg-4~)
Conffiles:
/etc/apache2/mods-available/php7.0.conf 7b91f8ac555faba6042a634ac4749a31
/etc/apache2/mods-available/php7.0.load c7e5835c5c22c6cb1365185303d108a5
Description: server-side, HTML-embedded scripting language (Apache 2 module)
This package provides the PHP module for the Apache 2 webserver (as
found in the apache2-mpm-prefork package). Please note that this package
ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
.
The following extensions are built in: Core date filter hash libxml openssl
pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: libapache2-mod-php7.2
Status: deinstall ok config-files
Priority: optional
Section: httpd
Installed-Size: 4685
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.2
Version: 7.2.24-0ubuntu0.18.04.17
Config-Version: 7.2.24-0ubuntu0.18.04.17
Provides: libapache2-mod-php, phpapi-20170718
Depends: libmagic1, libpcre3 (>= 2:8.35), mime-support, php7.2-cli, php7.2-common (= 7.2.24-0ubuntu0.18.04.17), php7.2-json, php7.2-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-0 (>= 0~20160406~), libc6 (>= 2.27), libsodium23 (>= 1.0.14), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
/etc/apache2/mods-available/php7.2.conf ad48fb8185ef5a0054b3d42dd69ddd83
/etc/apache2/mods-available/php7.2.load 1790052956cac6a431bea6593ebdbfb4
Description: server-side, HTML-embedded scripting language (Apache 2 module)
This package provides the PHP module for the Apache 2 webserver (as
found in the apache2-mpm-prefork package). Please note that this package
ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
.
The following extensions are built in: Core date filter hash libxml openssl
pcre Reflection session sodium SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: libapache2-mod-php8.1
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5277
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Replaces: libapache2-mod-php7.4 (>> 8.1.2-1~), libapache2-mod-php8.0 (>> 8.1.2-1~)
Provides: libapache2-mod-php, php8.1-json, phpapi-20210902
Depends: libmagic1, mime-support, php8.1-cli, php8.1-common (= 8.1.2-1ubuntu2.20), php8.1-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
/etc/apache2/mods-available/php8.1.conf ad48fb8185ef5a0054b3d42dd69ddd83
/etc/apache2/mods-available/php8.1.load e2f77af79aab42c8610fd83ca529824c
Description: server-side, HTML-embedded scripting language (Apache 2 module)
This package provides the PHP module for the Apache 2 webserver (as
found in the apache2-mpm-prefork package). Please note that this package
ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
.
The following extensions are built in: Core date filter hash json libxml
openssl pcre Reflection session sodium SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: libapparmor1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 3.0.4-2ubuntu2.3
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.34)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
libapparmor1 provides a shared library one can compile programs
against in order to use various AppArmor functionality,
such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Package: libappindicator3-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: libappindicator
Version: 12.10.1+20.10.20200706.1-0ubuntu1
Depends: libc6 (>= 2.4), libdbusmenu-glib4 (>= 0.4.2), libdbusmenu-gtk3-4 (>= 0.4.2), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.0.0)
Suggests: indicator-application (>= 0.2.93)
Description: Application Indicators
A library and indicator to take menus from applications and place them in
the panel.
.
This package contains shared libraries to be used by applications.
Homepage: https://launchpad.net/libappindicator
Package: libappstream4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 576
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: appstream
Version: 0.15.2-2
Depends: libc6 (>= 2.33), libcurl3-gnutls (>= 7.63.0), libglib2.0-0 (>= 2.67.3+git20210214), libstemmer0d (>= 0+svn527), libxml2 (>= 2.9.0), libxmlb2 (>= 0.3.4), libyaml-0-2
Description: Library to access AppStream services
AppStream is a metadata specification which permits software components to
provide information about themselves to automated systems and end-users
before the software is actually installed.
This permits informative displays of new applications to users in software
centers, as well as allowing a system to make decisions on which new software
a user might want to install (e.g. missing firmware or media handlers).
.
This package contains a GObject-based library to access AppStream
services, like the software component metadata pool.
It also contains functions for reading, writing and transforming AppStream
metadata.
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Homepage: https://www.freedesktop.org/wiki/Distributions/AppStream/
Package: libapr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 290
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.7.0-8ubuntu0.22.04.1
Depends: libc6 (>= 2.34), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libaprutil1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libapr1 (>= 1.6.2), libc6 (>= 2.25), libcrypt1 (>= 1:4.1.0), libdb5.3, libexpat1 (>= 2.0.1), libgdbm6 (>= 1.16), libssl3 (>= 3.0.0~~alpha1)
Breaks: libapr1 (<< 1.4.8-2~)
Description: Apache Portable Runtime Utility Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libaprutil1 (= 1.6.1-5ubuntu4.22.04.2), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the SQLite3 database driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libaprutil1 (= 1.6.1-5ubuntu4.22.04.2), libc6 (>= 2.4), libldap-2.5-0 (>= 2.5.4)
Description: Apache Portable Runtime Utility Library - LDAP Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the LDAP driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libapt-pkg-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 644
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.4.13
Depends: libapt-pkg (= 2.4.13), zlib1g-dev
Description: development files for APT's libapt-pkg and libapt-inst
This package contains the header files and libraries for
developing with APT's libapt-pkg Debian package manipulation
library and the libapt-inst deb/tar/ar library.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: libapt-pkg6.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.4.13
Provides: libapt-pkg (= 2.4.13)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 11), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 2.4.13)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
This library provides the common functionality for searching and
managing packages as well as information about packages.
Higher-level package managers can depend upon this library.
.
This includes:
* retrieval of information about packages from multiple sources
* retrieval of packages and all dependent packages
needed to satisfy a request either through an internal
solver or by interfacing with an external one
* authenticating the sources and validating the retrieved data
* installation and removal of packages in the system
* providing different transports to retrieve data over cdrom, ftp,
http(s), rsh as well as an interface to add more transports like
tor+http(s) (apt-transport-tor).
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: libarchive13
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 876
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libarchive
Version: 3.6.0-1ubuntu1
Depends: libacl1 (>= 2.2.23), libbz2-1.0, libc6 (>= 2.33), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.2.2), libnettle8, libxml2 (>= 2.7.4), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: lrzip
Description: Multi-format archive and compression library (shared library)
The libarchive library provides a flexible interface for reading and writing
archives in various formats such as tar and cpio. libarchive also supports
reading and writing archives compressed using various compression filters such
as gzip and bzip2. The library is inherently stream-oriented; readers serially
iterate through the archive, writers serially add things to the archive.
.
Archive formats supported are:
.
* tar (read and write, including GNU extensions)
* pax (read and write, including GNU and star extensions)
* cpio (read and write, including odc and newc variants)
* iso9660 (read and write, including Joliet and Rockridge extensions, with
some limitations)
* zip (read only, with some limitations, uses zlib)
* mtree (read and write)
* shar (write only)
* ar (read and write, including BSD and GNU/SysV variants)
* empty (read only; in particular, note that no other format will accept an
empty file)
* raw (read only)
* xar (read only)
* rar (read only, with some limitations)
* 7zip (read and write, with some limitations)
.
Filters supported are:
.
* gzip (read and write, uses zlib)
* bzip2 (read and write, uses bzlib)
* compress (read and write, uses an internal implementation)
* uudecode (read only)
* separate command-line compressors with fixed-signature auto-detection
* xz and lzma (read and write using liblzma)
* zstandard (read and write using libzstd)
.
This package provides the libarchive shared library.
Homepage: https://www.libarchive.org/
Original-Maintainer: Peter Pentchev <roam@debian.org>
Package: libargon2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20171227-0.3
Depends: libc6 (>= 2.34)
Description: memory-hard hashing function - runtime library
Argon2 is a password-hashing function that can be used to hash passwords
for credential storage, key derivation, or other applications.
.
There are two main versions of Argon2: Argon2i and Argon2d.
Argon2i is the safest against side-channel attacks, while Argon2d provides
the highest resistance against GPU cracking attacks.
.
Argon2i and Argon2d are parametrized by:
* A time cost, which defines the amount of computation realized and
therefore the execution time, given in number of iterations
* A memory cost, which defines the memory usage, given in kibibytes
* A parallelism degree, which defines the number of parallel threads
.
This package includes the dynamic library against which programs are linked.
Original-Maintainer: Luca Bruno <lucab@debian.org>
Homepage: https://github.com/P-H-C/phc-winner-argon2
Package: libasan6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7518
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1
Description: AddressSanitizer -- a fast memory error detector
AddressSanitizer (ASan) is a fast memory error detector. It finds
use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libasound2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: alsa-lib
Version: 1.2.6.1-1ubuntu1
Depends: libasound2-data (>= 1.2.6.1-1ubuntu1), libc6 (>= 2.34)
Suggests: libasound2-plugins (>= 1.0.24)
Breaks: alsa-utils (<< 1.2.1)
Description: shared library for ALSA applications
This package contains the ALSA library and its standard plugins, as well
as the required configuration files.
.
ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Package: libasound2-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: alsa-lib
Version: 1.2.6.1-1ubuntu1
Replaces: libasound2 (<< 1.2.6.1-1ubuntu1)
Recommends: alsa-ucm-conf, alsa-topology-conf
Suggests: alsa-utils
Breaks: libasound2 (<< 1.2.6.1-1ubuntu1)
Description: Configuration files and profiles for ALSA drivers
This package contains configuration files for ALSA drivers.
.
ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.5-1build1
Depends: libc6 (>= 2.33), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
Libassuan is a small library implementing the so-called "Assuan
protocol". This protocol is used for IPC between most newer GnuPG
components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libatasmart4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libatasmart
Version: 0.19-5build2
Depends: libc6 (>= 2.33), libudev1 (>= 183)
Description: ATA S.M.A.R.T. reading and parsing library
A small and lightweight parser library for ATA S.M.A.R.T. hard disk
health monitoring.
.
This package contains the shared library.
Homepage: http://0pointer.de/blog/projects/being-smart.html
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libatk-bridge2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-atk
Version: 2.38.0-3
Depends: libatk1.0-0 (>= 2.36.0~), libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.41.1)
Description: AT-SPI 2 toolkit bridge - shared library
This package contains the ATK bridge shared library.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility
Package: libatk1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: atk1.0
Version: 2.36.0-3build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.55.2), libatk1.0-data (>= 2.36.0-3build1)
Description: ATK accessibility toolkit
ATK is a toolkit providing accessibility interfaces for applications or
other toolkits. By implementing these interfaces, those other toolkits or
applications can be used with tools such as screen readers, magnifiers, and
other alternative input devices.
.
This is the runtime part of ATK, needed to run applications built with it.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility
Package: libatk1.0-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: atk1.0
Version: 2.36.0-3build1
Description: Common files for the ATK accessibility toolkit
ATK is a toolkit providing accessibility interfaces for applications or
other toolkits. By implementing these interfaces, those other toolkits or
applications can be used with tools such as screen readers, magnifiers, and
other alternative input devices.
.
This contains the common files which the runtime libraries need.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility
Package: libatm1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-4build2
Depends: libc6 (>= 2.34)
Description: shared library for ATM (Asynchronous Transfer Mode)
Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Homepage: http://linux-atm.sourceforge.net/
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
library providing __atomic built-in functions. When an atomic call cannot
be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libatspi2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.44.0-3
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.62), libx11-6 (>= 2:1.2.99.901), libxi6 (>= 2:1.2.99.4)
Recommends: at-spi2-core (= 2.44.0-3)
Description: Assistive Technology Service Provider Interface - shared library
This package contains the shared library for applications that wish to use
the at-spi interface.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility
Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.1-1build1
Depends: libc6 (>= 2.4)
Conffiles:
/etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
Contains the runtime environment required by programs that make use
of extended attributes.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/attr/
Package: libaudit-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:3.0.7-1build1
Conffiles:
/etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
.
This package contains the libaudit.conf configuration file and the associated
manpage.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/
Package: libaudit1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:3.0.7-1build1
Depends: libaudit-common (>= 1:3.0.7-1build1), libc6 (>= 2.33), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/
Package: libauthen-sasl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 119
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.1600-1.1
Depends: perl:any
Suggests: libdigest-hmac-perl, libgssapi-perl
Description: Authen::SASL - SASL Authentication framework
SASL is a generic mechanism for authentication used by several network
protocols. Authen::SASL provides an implementation framework that all
protocols should be able to share.
.
The framework allows different implementations of the connection class
to be plugged in. At the time of writing there were two such plugins:
- Authen::SASL::Perl
This module implements several mechanisms and is implemented
entirely in Perl.
- Authen::SASL::Cyrus
This module uses the Cyrus SASL C-library (both version 1 and 2 are
supported).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Authen-SASL
Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.2
Depends: libavahi-common3 (= 0.8-5ubuntu5.2), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14)
Description: Avahi client library
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains the library for Avahi's C API which allows you
to integrate mDNS/DNS-SD functionality into your application.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.2
Description: Avahi common data files
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains common data files for avahi.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.2
Depends: libc6 (>= 2.34), libavahi-common-data (= 0.8-5ubuntu5.2)
Description: Avahi common library
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains the Avahi common library, which is a set of common
functions used by many of Avahis components and client applications.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libbabeltrace1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 502
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: babeltrace
Version: 1.5.8-2build1
Replaces: libbabeltrace-ctf1 (<< 1.5.3-2~)
Provides: libbabeltrace-ctf1 (= 1.5.8-2build1)
Depends: libc6 (>= 2.33), libdw1 (>= 0.126), libelf1 (>= 0.131), libglib2.0-0 (>= 2.30.0), libuuid1 (>= 2.16)
Breaks: libbabeltrace-ctf1 (<< 1.5.3-2~)
Description: Babeltrace conversion libraries
Babeltrace provides trace reading and writing libraries, as well as a trace
converter. Plugins can be created for any trace format to allow its conversion
to/from any other supported format.
.
This package provides the babeltrace trace reading and conversion library.
Original-Maintainer: Jon Bernard <jbernard@debian.org>
Homepage: https://www.efficios.com/babeltrace
Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.3
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.34), zlib1g (>= 1:1.2.0), binutils-common (= 2.38-4ubuntu2.3)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 323
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libc6 (>= 2.33)
Description: block device ID library
The blkid library allows system programs such as fsck and mount to
quickly and easily find block devices by filesystem UUID or label.
This allows system administrators to avoid specifying filesystems by
hard-coded device names and use a logical naming system instead.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: libblockdev-crypto2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblkid1 (>= 2.23.0), libblockdev-utils2 (>= 2.20), libc6 (>= 2.25), libcryptsetup12 (>= 2:2.0.3), libglib2.0-0 (>= 2.42.2), libnss3 (>= 2:3.13.4-2~), libvolume-key1 (>= 0.3.9)
Description: Crypto plugin for libblockdev
The libblockdev library plugin (and at the same time a standalone library)
providing the functionality related to encrypted devices (LUKS).
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-fs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblkid1 (>= 2.24.2), libblockdev-part-err2 (>= 2.14), libblockdev-utils2 (>= 2.16), libc6 (>= 2.7), libglib2.0-0 (>= 2.42.2), libmount1 (>= 2.30.2), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), e2fsprogs
Description: file system plugin for libblockdev
The libblockdev library plugin (and at the same time a standalone library)
providing the functionality related to operations with file systems.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-loop2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblockdev-utils2 (>= 2.14), libc6 (>= 2.27), libglib2.0-0 (>= 2.42.2)
Description: Loop device plugin for libblockdev
The libblockdev library plugin (and at the same time a standalone library)
providing the functionality related to loop devices.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-part-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libc6 (>= 2.3), libglib2.0-0 (>= 2.42.2)
Description: Partition error utility functions for libblockdev
libblockdev-part-err is a library providing utility functions used by the
libblockdev library and its plugins.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-part2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblockdev-part-err2 (>= 2.14), libblockdev-utils2 (>= 2.14), libc6 (>= 2.29), libglib2.0-0 (>= 2.42.2), libparted2 (>= 3.1), gdisk (>= 0.8.6), fdisk | util-linux (<< 2.29.2-3~)
Description: Partitioning plugin for libblockdev
The libblockdev library plugin (and at the same time a standalone library)
providing the functionality related to partitioning devices.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-swap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblkid1 (>= 2.23.0), libblockdev-utils2 (>= 2.14), libc6 (>= 2.4), libglib2.0-0 (>= 2.42.2)
Description: Swap plugin for libblockdev
The libblockdev library plugin (and at the same time a standalone library)
providing the functionality related to swap devices.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev-utils2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.42.2), libkmod2 (>= 5~), libudev1 (>= 216)
Description: Utility functions for libblockdev
The libblockdev-utils is a library providing utility functions used by the
libblockdev library and its plugins.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libblockdev2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libblockdev
Version: 2.26-1
Depends: libblockdev-utils2 (>= 2.14), libc6 (>= 2.34), libglib2.0-0 (>= 2.42.2)
Conffiles:
/etc/libblockdev/conf.d/00-default.cfg 7a51eb0d581c2472e8738775147375a1
Description: Library for manipulating block devices
libblockdev is a C library with GObject introspection support that can be used
for doing low-level operations with block devices like setting up LVM, BTRFS,
LUKS or MD RAID.
.
The library uses plugins (LVM, BTRFS,...) and serves as a thin wrapper around
its plugins' functionality. All the plugins, however, can be used as
standalone libraries. One of the core principles of libblockdev is that it is
stateless from the storage configuration's perspective (e.g. it has no
information about VGs when creating an LV).
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/storaged-project/libblockdev
Package: libboost-regex1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3013
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Provides: libboost-regex1.74.0-icu70
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 11)
Description: regular expression library for C++
This package forms part of the Boost C++ Libraries collection.
.
Regular expressions are a form of pattern-matching that are often
used in text processing; many users will be familiar with the Unix
utilities grep, sed and awk, and the programming language perl, each
of which make extensive use of regular expressions. Traditionally C++
users have been limited to the POSIX C APIs for manipulating regular
expressions, and while regex does provide these APIs, they do not
represent the best way to use the library. For example regex can cope
with wide character strings, or search and replace operations (in a
manner analogous to either sed or perl), something that traditional C
libraries can not do.
Homepage: http://www.boost.org/libs/regex/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>
Package: libbpf0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 344
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbpf (0.5.0-1ubuntu22.04.1)
Version: 1:0.5.0-1ubuntu22.04.1
Depends: libc6 (>= 2.22), libelf1 (>= 0.142), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
libbpf is a library for loading eBPF programs and reading and
manipulating eBPF objects from user-space.
.
This package contains the shared library.
Original-Maintainer: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: brotli
Version: 1.0.9-2build6
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
Brotli is a generic-purpose lossless compression algorithm
that compresses data using a combination of a modern variant
of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
with a compression ratio comparable to the best currently available
general-purpose compression methods. It is similar in speed with
deflate but offers more dense compression.
.
This package installs shared libraries.
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>
Homepage: https://github.com/google/brotli
Package: libbsd0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.11.5-1
Depends: libc6 (>= 2.33), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
This library provides some C functions such as strlcpy() that are commonly
available on BSD systems but not on others like GNU systems.
.
For a detailed list of the provided functions, please see the libbsd-dev
package description.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://libbsd.freedesktop.org/
Package: libbz2-1.0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-5build1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
This package contains libbzip2 which is used by the bzip2 compressor.
.
bzip2 is a freely available, patent free, data compressor.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://sourceware.org/bzip2/
Package: libc-ares2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: c-ares
Version: 1.18.1-1ubuntu0.22.04.3
Replaces: libc-ares1
Depends: libc6 (>= 2.17)
Conflicts: libcares2
Description: asynchronous name resolver
c-ares is a C library that performs DNS requests and name resolution
asynchronously.
.
It is a fork of the library named "ares", with additional features:
* IPv6 support;
* extended cross-platform portability;
* 64-bit clean sources.
.
This package provides the shared libraries.
Homepage: https://c-ares.org/
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2537
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.4
Depends: libc6 (>> 2.35), libc6 (<< 2.36)
Suggests: manpages
Conffiles:
/etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
/etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
/etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
/etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
/etc/default/nss d6d5d6f621fb3ead2548076ce81e309c obsolete
Description: GNU C Library: Binaries
This package contains utility programs related to the GNU C Library.
.
* getconf: query system configuration variables
* getent: get entries from administrative databases
* iconv, iconvconfig: convert between character encodings
* ldd, ldconfig: print/configure shared library dependencies
* locale, localedef: show/generate locale definitions
* tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 299
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.7
Depends: libc6 (>> 2.35), libc6 (<< 2.36)
Recommends: manpages, manpages-dev, libc-devtools (>> 2.35)
Description: GNU C Library: Development binaries
This package contains utility programs related to the GNU C Library
development package.
.
* gencat: generate message catalogs
* rpcgen: compile RPC protocols to C
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libc-devtools
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 351
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.7
Replaces: libc-dev-bin (<< 2.31-8)
Depends: libc6 (>= 2.34), libgd3 (>= 2.1.0~alpha~)
Recommends: manpages, manpages-dev
Breaks: libc-dev-bin (<< 2.31-8)
Description: GNU C Library: Development tools
This package contains development tools shipped by the GNU C
Library.
.
* memusage, memusagestat: profile a program's memory usage
* mtrace: interpret the malloc trace log
* sotruss: trace shared library calls
* sprof: display shared object profiling data
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 13597
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.35-0ubuntu3.7
Replaces: libc6-amd64
Depends: libgcc-s1, libcrypt1 (>= 1:4.4.10-10ubuntu4)
Recommends: libidn2-0 (>= 2.0.5~), libnss-nis, libnss-nisplus
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: busybox (<< 1.30.1-6), fakeroot (<< 1.25.3-1.1ubuntu2~), hurd (<< 1:0.9.git20170910-1), ioquake3 (<< 1.36+u20200211.f2c61c1~dfsg-2~), iraf-fitsutil (<< 2018.07.06-4), libgegl-0.4-0 (<< 0.4.18), libtirpc1 (<< 0.2.3), locales (<< 2.35), locales-all (<< 2.35), macs (<< 2.2.7.1-3~), nocache (<< 1.1-1~), nscd (<< 2.35), openarena (<< 0.8.8+dfsg-4~), openssh-server (<< 1:8.2p1-4), r-cran-later (<< 0.7.5+dfsg-2), wcc (<< 0.0.2+dfsg-3)
Conffiles:
/etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libc6-dbg
Status: install ok installed
Priority: optional
Section: debug
Installed-Size: 18254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.35-0ubuntu3.7
Provides: libc-dbg, libc6-dbgsym
Depends: libc6 (= 2.35-0ubuntu3.7)
Description: GNU C Library: detached debugging symbols
This package contains the detached debugging symbols for the GNU C
library.
Homepage: https://www.gnu.org/software/libc/libc.html
Build-Ids: 005ced28ca6ff4a01ab9cfd33e5fc1b641d808e5 005dd555a3f8d6e5db1a95ec5604c69a9b7f0ae5 0115183eabfbad82708d34d9577c9c761618e954 013f905536f0de137a98596b8f47d4312c06f60b 01c8e0c8389941a2ff675b7e41799362d24cd30b 0267507bead5e53d72cc463b69b4df92b1b75235 03ac7622e3d338e9e30f8814e6d303d0aeb4c938 042f480e4a266680e65824c493fd15dbfabd5b32 043e4c4910214778af172dd5f842ce594389f1ae 05f72a77dc83184085259eaa96894345606c294e 08136c10efbb81895b213189ee32a57c0224e4b0 0872fd60b2a1d3bd375e02701b70e691c99a2e22 089d2c3068a9403b331fbf990d7a59755ffd383b 0998d8466426e05bacb521b6374493c89d3fd503 0a0609994dcf1657f6b8d74557991486a0320fe5 0bc4131721a281ba15afd786fd41af922f41e632 0c5cf5d39b87f9a6dc4781792f8216e301aa4f61 0cab3755e1df35162fa2d9486b1f5f90a687f882 0d41aae367375bdbef91427157bce5d59c05fe08 0e2fc555cc8b62ce8fa47b2cad5ca29b5a9397af 0f255b12cb41a425335ebbc5c56df5755df2048f 0facbc366ff9c9b38896b501908caea01425305d 112e3f0ffbd1856a72b5901e3cf19b9b7bdbed3f 13ec8172addc3e9b5640948fae118696469e1332 158283ea2a09f29281d18686a89b4f081cae98d6 1974440f5f442fc824d4774516478bb255da0439 1ccf0c9bcc7bd44f09bfc3027d17af85eb39e5fe 1e417261f8af46cb81d3c40b60c9932faac43ebb 1f1bde5e64ffa18d86e484ebb4c825b098cbeeec 20541508506009e2cbc463657ea7e9ee48b03bf6 207b539b3bf46807722e384b1b200fe43b63c910 20c93035bebec3dde62ac6ff1ba3faed181dd55f 20f37ddb6186e7d7272c642f393c6c02e3741553 22115409408bdead8fd6424a8db7a69d70a744b2 2234e62660289b558360eef5c187815edccfdb69 246ac0d8deba5a40c63e9a1a87d4d779d8eb589f 26eb548331c72e1dc94234c58a4953430aa65449 2714327ade2a76a72795811fc1b0320e1319067d 27ed5394e8dd90a1ddd07be59d571925cdd8b572 28762881deedefc89ada717c7876a3473d811fc7 2947fa935df8c7b711bd4f60c5f933b2806978d9 29a427fb9a8ddd466c87c31663b335fd64fe4a18 29e328cad99e1506ce9339873220a0bbb9715104 2a7791ba4256044bbfb06d477f5763e034556c89 2b89d4881cc058ba2ea58a1ee1c33e66c2c97460 2becd67501b5b1177cc49ecf3d9828152ad3c5af 2c0269cf8df6b04a0ac762b332e5da6744992b9b 2c45b7500c57a8fed59b34e5f5137bf7b3c5af45 2c4f7d7d6807666a9f2401ad9312299f30db2197 2cefad8d3ac7ec75b9fa24fcaefea8594e8460c7 2d0677fbebcff44db092cd6832dcaedf0d93292c 2e1e612b2ff0374cd1d551bc36c5b88416019509 2e9a22728a224ff64bfb4816500f36717c679106 31349c66906485e497196522fb38230fcba7540b 314b0604529f78f1271c53652f91dd7dd66d9f78 31ac249c494528dd31e5d90bf27b4133fbc25429 31bb815275cabb0c38dcba214969dd97758ac770 33d7bc54ac74b7dfd255e723a01c9190f8a21a6a 346006c3dbd96dea8a82f730701d078f5bf18c45 351658b7b24d80f8c7bf9d5a6e678bc33e31c7e7 36244d6ab7a3d7a6ef44c5c9ddf4ddd702697899 374a3cf154c33803ad44635196b36d51728106c1 3888eca64162a53350ee66b408d3232a77733628 39807a67df135632d12f73b9113b98206b9dcef5 3b64b4bd0be6a969b013836ccca9022cfd91a8c7 3d182202371bdf3be34cd5d51a7bb29d5db1cd0b 3dbb88067c672ce35ba7b3040a9c4e91963590db 3deb39590f5b3ed874efba24a231c6250867d6b6 3e43acdbe3d94852c0cb8fbd8a39dbff2cbd4812 3ea95821cd74f55cd2721a89da96e0a2ebc2d8ec 3f775f9ecc5b4b1dba1f7539e2a80743e909ef4d 3fded3a6cf83f294cc26e120d3e7994c159b1e61 403129a6ea47f66c1e90f2f70ae0efaeac8e3775 40db27b96127311650a5c4cad4c3f7ef8b88019a 419fbb1ac92273a1d0292001dff169a33aa8454c 41b60d9e83000a4972619cea391aac9febe57c46 424d6dd52d1f956065058e597eaa7e5a789f86e5 43070387a72080a6986369a2960eeb341b8ec123 43491b7743e5b93969dcb0c499181e200707b85b 43d7042e0a4d63ded6fb577d95b15606eae6cf71 4496c0c160c617a568202b38cb8b89b15e5f51cc 4540ca63dd673fd2aa364de40b02f5d0e50dd3b8 45e6c0089f0d495cb5d17e4532ab193c71117169 46bdfab9ecd9551098fddce5e6ef820f614722da 485f6fded1101e85cfcf2c596805253108a58635 48b1523dda50e1c076acb8bf6a0a048bbefdeb09 48cb0bcd2cff3f75f64c947f4daba6979cdf1898 49657b730c62dc7a90c72934b29adf97211405e9 49cd06d39b2e03275b1ef836970085174a63848d 4a98fb0fdcfd5e8b184e55e9ddcb7331f79f5741 4b9aebd84db6b33e28781bc103957adb7bdae307 4c5394c7efc316a7abb2baeffe93521d0b66edc7 4c95cc0def692c3c129aadc75928db87885e67e1 4d59f51aa8be27153f0ce0aa2b39c3b9b7d2a1eb 4f5c068b4cb08b63483e71cf0fa3af38bd8b555b 523fd7ecf606dc2791f5c8162216b8a2e25b06dc 5390f0ebbb84cab51cf75f5a5090d89a39a16871 54338b0b9785964b501fc0eb8692271c1921c1d5 5526a073767020f748d19f01fe7795da0500bf5c 5596187ebd6596a93820173347bb13f7e9f4e791 55a21ea8f7f59b69b91e1e46a1fd5fd483617f17 567d0fdcb732d5780a8b8a61b85a772317b6dca9 568850b7c8d8f9eaa158cda10558e3d0a4d33646 5815073683dfb6ee82b5724f88bc50d837cbc0de 59424782018ddeb65aee1c22e35d4b9dd9427389 594b20f37868b29db549e8e8189a3230e1d32cc3 5a602cf53c9087387e8e57b2d5eea4d14493e5f5 5a71da54a62e051f4a4fefc2b54cb18fbf631a44 5aecb83ff4d5f21f482f7fa4d10f42ca9cbdeb59 60e40d7722a18050b01147dabb5c4a2267f45e62 6259511b870471130a8e9aebb9f53ef0e2380c6f 629fb07f1201b25ab8e1cc1a2b168c2e91a01909 6645890034ca59883c48bee9330479ae3fdd9abd 66db211f7812f11d8323cff37ddf1ecf3cd8f343 687a2199008640f19ad211867da4de00024af472 69233813d14344672b9616f9038eb010a0218a2f 69529f08fb32405133b484fed35a9650a7dc2732 6b1cacd534a3d6a2aa8c2984a70d0b2a43cc57b0 6b66e7dabad169e09f7f9eb1f8a7b101d42a4b1a 6d5c58b69da8bb470728105e85a26f029f082b3a 6df796663a9a50bf787991154b4b9a0934383356 705a1beddaf06ed7779a1403cad8ff4d189a052c 711425d7983d7d393189b6cfbe769ee5ed8f385e 7177065f59f0a4f0d7caca0167e579b60f80048a 72076c9b543ce357ac5897f6437b9dfca2a795bb 721f63bb121a23bd1206f35d63472c4a81d8112a 72b9101d2c420883770f1b5d56bd18600e269776 7327fb0ca9749bf0712419f57e419ab32dbc5810 733b6d6bd7045e5e25e260a2473930a49209c82d 738d86c8969d0f9ee90188d1e10bea2acefe8539 75a47f15a4558a4a3c2cd975499577ddb2da0e1b 76c0cb2fc8218619422731fa62591a46388f3e48 76d2a5c2f739b868dd99fd7be844306599ec46ac 786da966b6b469694e92aa606462fd0c2c8d0ebb 78c5228b6991969440845de1e10552367ff122de 7922ee3e71f32891a0abc9f2e8b85e10693daecb 79e566fe6f3bae5c2b27e54e19528099c5d535a4 7a6c1ee87ca83a9f2b6a051a8c2191fcf0fa12b0 7ad19a3dd5e09fe892461b6ade3ece85608513bc 7b4086f2d29c14c9f9379ca7d95a84b392cde3b6 7c02b4049d60fa15db5bbf013e193848a7be8fe1 7ce12e6f58c17de840784544fac66df61d4535e5 7d01f817bcfed50c2591beaf5f34584103c05295 7d86a7a9daf0d0a6414acf9fc4c384697e96a2c8 7dade699290b941426684e5599b6df7fdcbf070a 7db86ffc4d24e2cb8079544831bc45d152d4c3a6 7e7a0067e4f73553b7458d5f1aa8824b43933cff 7fe48bfb6f210e49f463e84f237d883eb70401f7 814c613365383cf84302ddf04f1d814ac34f0f1b 82599ce5f924ac76d3508f570afe7fa0a3f1313d 83b31e26c9e5ead1108c5695f5c94c67629c7388 841dfaa3b69547fc43a42ecc1bd1cd24b67eedbe 8469c2da5feff4a011499ab6221622ef82f729f9 86513efa27e6961ae372a28d7a80c9786b56e4c9 8688512b442ad9cedf4bfd93a8204a4899908e52 873aa31165f840e197bee5374f696bba78fc7748 87606259365c12d48f7e0b7b2f60b932b0a24835 8766191a1fc1d53fe7878dd1f53f79e37f0ae07a 87cb3baf558146768f39f52519c4ffbf72166408 87eaf97d967afd2a159d4a5ee611d5bc4fedcae3 88ca1993f16ec0faea65cd0389655b745ae8d152 88e7874ec8ace9c1b1550eb2e84c39dfa97bd864 898544c4e21c807b026f14a592ba4aefa417363d 8a310e129cb455569e552faba72ecdbcda754093 8a8ce554b5ee06a2a442934b5cea22e60878024f 8adb0f8a8bcc912b59bad994d65aa1824d2497d4 8c409628547ee3f8243248bcb8cd0d37d7b223e3 8d35ef1ed78026c1c533fc2bfc3147555135ce61 8df0fa898ab993dad9d8d0004517a9c30312409e 8e68739cced050bd031c725f7d988f8385f38fad 8f02ba8d4bfbc22d0e87927c8fc56352c595777e 8fc3dd4c1150659a5d337684aef3cb80d5c95977 9087a0f61cf93e3123000107ff0881960606a00e 92423252ffaf35bc4076da8913c19b93985b21d7 92bf2d477cabf9f3c91d5042f34bb3ff56cb7668 931681cf191499c11ee5bc5a1890a85ed86c941d 94c8f232153d98765c8cfee6633f374c162ae275 962015aa9d133c6cbcfb31ec300596d7f44d3348 9996ed58a120874d0155d1e0ee3539d7d9548a62 9a4696e38b59544f8b773d83f584f0b9b9d0b0bb 9d8d209c2846b07f62d896b017bd6b29e604a969 9e06ace9cd17c6270603471b6f0b4f0fcbe773e5 9e6eed3c4c9a047f0fb5e78532547f6e78d2a96d 9f5091f9afcafa6a303ac0d491bce7e58eaf733e a198a6226037672e0525753e8280ceeda93e5cb9 a22cadf7fc58be394f97a95ba931cc83fb6eb1cd a30c6c61c9a3f5530e5b1608e1bf725c4800ebaa a3521dd61adde2c5e845b66c5457ac08956eabe7 a5e61561a0c914b80b9896eb86b71df6f7f68e88 a6e640d1712dacd8d8962512784368ca758ee17d a6f18190f710ee0a39844b527094dcf0f4698283 a6f2cbbbb8a2554b30226ab4797cc3229572e4d7 a81d8c288b18e62f9269622fa2dad2742044bcbd a88f507d624750622f70180d10b9322eda5a836d a9828daab48527f06be0b3aa07f907344b2c061f aa27f615ef91733139d5792348769fff22e8b737 ac09b8c790885ea42d21423c8c0eb68ec5358a6d ad870ed8d9550f5e4933b9510212649dd4776475 af5cd696f91dd402d8bfe1a89991cf5d18a7ba83 afc95bb32396afbc4ca8d7f629410b066b77d3f9 b0c7e1b6545067e0b89722433c7b38e0a42e4716 b119f5155f078981cc4f6491e9854f8d8c0e0ba5 b30b0f851b3218794c6e2a8fff0539d94bda8576 b351818e416164fdbcbf562f027e99cb19aff784 b37453d1a4febfb2c753062a61e80cc75f77606c b39793fe51429636c89522344fac57e1281df8cc b55ba6d8b5954b479fab2a69a54b9f56451fbee0 b5c5d5d872e301a9257b76d9d492fb2a65d3de9f b7116d04431fec34003edae5ddfc6b2bfea2866c bad108e0418dc741a2932c366298a31b5b581f38 bb8f3319cdc7dc81862085bc5131bdef07571de2 bdd94fd94bd507c708576525d16a745f62b1f869 bde0ad506ecc6543b5313d805691576360fce10d be2446d637e33137b71c5838aa9f64301a04a63f be326349a7677a37a52de2a0cbd65e7e9773e2b1 bedd459e77c7cf8e8743e2d1b5be042a9d04ec9d bf99aa49b41a69acd20ae541bf35503e524978e8 c1f27ece42f08f041c1004bf636f40ac18fe0c70 c21b55a5565e675ff55d1bdf2377edcb976c39c2 c24b049328542c6f25d75b6a9d8bb0df522ccba6 c2584a20089ac09e0f25d26b7f1435dcd12c263d c3b3475edc4d660187ddc387f574223f0f312339 c59756c8127b317d46f8bbfd80e3839574015171 c5d9c0a301e65e6d63cc13a29e2a6bb38662f900 c7dc63f9d71506bc742f6f6489056ab366179a0e c9a33bd398133e67da00b5ae7431e8e5bda457f9 c9bdfe1b9e4c9282c6280b5ef14e5bff2c1c6127 caf3b489c3f49f9790e902fc5f839526653c9b84 cb7666f739690b43e7112896ecce41c4b18435c4 cc7c969cc3c8897678576ce882344edeffbe57d9 ce6720ed1b524d9bcc95d58d42a3b550d3a8e3fd cf1c55bdf35ca870b2577e1d4ead02ea34c489b4 d1f65a722fb2a51985c7a582b8e09b466716c2e4 d20476964e3036003d17372a3fa3bd1ae149e0d6 d2af0bbdad1b17b62c3b56f70a6e01600624a454 d6efeb5671ae1b44cb6cbb245f16c7ea3ec074bf d78a2213fa7a3683a1c6022e098ed98484d26fc1 d7c4f8f946567ae7e43e36fce1da06e50f4807bd d7cd390b89c49fc02557b1532e34b42330391979 d92d120a941286235fe8e4f82052a4bdd6b0a49c dab6f3cd518558935168ae9af755da4c83215d6a db8b67845a7b9cdb9f1245842ed35bcd40567a03 dc60081cf23ffdec5de5693b929d603c0bdb0bdf dcbbbc8b78366460addacf2b5c051dd1e0cf5950 df4685868d8d1d32d3042cafbbc192a5c42bffe7 df6507e1abe8a356ce4885f89a0edf024e384ccd dfc5cbca8660562e628d292636e44c2f2c89d6be e102ff2c61bed9c0e11df9a4e0c70d1bf5ca977b e274a42ab3a2aabcb7b28cf5707379ccc46932d6 e3d564a94afe490730a6bc715e8f56c1170a66b6 e6b2dde26d1609606fd572020dc960e22e4a08c0 e70a6a811312a1738a32cec87fcec8c383aa33ed e721f3c7f481015d9caf792626bd7a6c2bd73c0a e780af78766ee31964021670e75f5d48c7a685f4 e90642a19b7c75be941631490081850c92677665 ec0b7e6e442fc513553f27384cf19ab690bcf243 ec7d5b982dfec7791635e9cb33103b9962cbf292 ed85bf5f99f7d2d4a8ffb30c43a54693b326402f ee720812a6960dc7430ce34c7555987f0e9899eb ef42d6182c2e5550abcddce93ff6bf38bac46729 effe35f815e0d6e6e4a49cf713d492287047a9be f08b506183fbf22e598d076266918c6b8baaf3e2 f0ff24790103bb2724ac9d84be62b2847a6d447e f10dd32e0bb723223d5682219d6774c5829da039 f11bee8e86ffe99ae5af5ffe62cbc920461687f9 f1dd59536b8187be8aefb7c99da99b5beae27129 f31deb6b666ede13fc8c238883eeed6efd564c23 f766dfb5e66e61fb6f5befe107c0cdfaac2952dc f808c584f327739a59328c440baf5dd282553beb f84847a1c9536e80116d3f49c89fd3540e33875d f9fce4621bf5c3cda56ae12beea2fc2589636336 fa2d23fa78653ca9516a397622fc81b7cc36547d fd4ed8ac90f94511d94f7c47a88a54f3e64ab605 038018d0c03928360dca520c25a88ae8ada00ba6 1f5ebb00dd29b8cb3bc200c2234a003120365eb2 223e3ee33b60057ca552eb6000d1c5e87af11320 3ed8f66a7fb981bd441c6c5eb746f75076f84bef 451305e299765d968e5b74413f8eda0ea7e7b100 48eb36d83185971679ca0210619bef356d103351 709155d6b2347a8d8133931a84a1bdee287de0a1 80d18a0c4382450f2dafc3a6ca208ba1c9f4307b 83f7602f2501fc57b416e3a053e78857fd65141e 8f02d96e111025ebecd59bf6650891927b093116 9307c46a225fd5dea028f7c319076213776072a2 9bf480e06d6315a17d8abcd4f5dd187cea91a403 a32ffabc48cacea3d26e901dda075441a71cb394 c0f564e32f3e9bc793dcfcc41fc1e27ac74b82fc c96f8fbfe1018cd49fbc6c3eed94d9e91c040e2d e1c6e5e61c779aede719ab069afab138a01ffc60 ea96d6ebb92fa207221cc17c5cb649a5b7a0cbd6 f8c4e85ae2cf9707d100c87ccc0655a167a9e102 fb166c57f4b8e06a936bf3152b66d56d3ca7b01b
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13038
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.35-0ubuntu3.7
Provides: libc-dev
Depends: libc6 (= 2.35-0ubuntu3.7), libc-dev-bin (= 2.35-0ubuntu3.7), linux-libc-dev, libcrypt-dev, rpcsvc-proto, libtirpc-dev, libnsl-dev
Suggests: glibc-doc, manpages-dev
Breaks: libc6-dev-amd64-cross (<< 2.35~), libgcc-10-dev (<< 10-20200321-1~), libgcc-7-dev (<< 7.5.0-6~), libgcc-8-dev (<< 8.4.0-2~), libgcc-9-dev (<< 9.3.0-5~), libperl5.26 (<< 5.26.1-3), python3.7 (<< 3.7.7-1+b1), python3.8 (<< 3.8.2-1+b1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
Contains the symlinks, headers, and object files needed to compile
and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-5ubuntu2
Depends: libcairo2 (= 1.16.0-5ubuntu2), libglib2.0-0 (>= 2.14.0)
Description: Cairo 2D vector graphics library (GObject library)
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends.
.
This package contains the GObject library, providing wrapper GObject types
for all cairo types.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://cairographics.org/
Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1351
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-5ubuntu2
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~)
Description: Cairo 2D vector graphics library
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends. Paths consist
of line segments and cubic splines and can be rendered at any width
with various join and cap styles. All colors may be specified with
optional translucence (opacity/alpha) and combined using the
extended Porter/Duff compositing algebra as found in the X Render
Extension.
.
Cairo exports a stateful rendering API similar in spirit to the path
construction, text, and painting operators of PostScript, (with the
significant addition of translucence in the imaging model). When
complete, the API is intended to support the complete imaging model of
PDF 1.4.
.
This package contains the shared libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://cairographics.org/
Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.9-2.2build3
Depends: libc6 (>= 2.33)
Description: An alternate POSIX capabilities library
This library implements the user-space interfaces to the POSIX
1003.1e capabilities available in Linux kernels. These capabilities are
a partitioning of the all powerful root privilege into a set of distinct
privileges.
.
The libcap-ng library is intended to make programming with POSIX
capabilities much easier than the traditional libcap library.
.
This package contains header files and libraries for libcap-ng.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://people.redhat.com/sgrubb/libcap-ng
Package: libcap2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1:2.44-1ubuntu0.22.04.1
Depends: libc6 (>= 2.33)
Description: POSIX 1003.1e capabilities (library)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <ckk@debian.org>
Package: libcap2-bin
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.44-1ubuntu0.22.04.1
Replaces: libcap-bin
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.33)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <ckk@debian.org>
Package: libcbor0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcbor
Version: 0.8.0-2ubuntu1
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
CBOR is a general-purpose schema-less binary data format, defined in
RFC 7049. This package provides a C library for parsing and generating
CBOR. The main features are:
.
- Complete RFC conformance
- Robust C99 implementation
- Layered architecture offers both control and convenience
- Flexible memory management
- No shared global state - threading friendly
- Proper handling of UTF-8
- Full support for streams & incremental processing
- Extensive documentation and test suite
- No runtime dependencies, small footprint
.
This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor
Original-Maintainer: Vincent Bernat <bernat@debian.org>
Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.45-1build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Description: module for recursively copying Perl datatypes
The Clone module provides a clone() method which makes recursive copies of
nested hash, array, scalar and reference types, including tied variables and
objects.
.
It is faster (although less flexible) than Storable's dclone. Its
functionality is _not_ serializing in-memory objects (i.e. as
Data::Dumper or YAML::Dump do), but deep-copying them over to new
in-memory structures.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Clone
Package: libcolord2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 616
Maintainer: Christopher James Halse Rogers <raof@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: colord
Version: 1.4.6-1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.58), liblcms2-2 (>= 2.6), libudev1 (>= 196)
Suggests: colord
Description: system service to manage device colour profiles -- runtime
colord is a system service that makes it easy to manage, install and generate
colour profiles to accurately colour manage input and output devices.
.
It provides a D-Bus API for system frameworks to query, a persistent data
store, and a mechanism for session applications to set system policy.
.
This package contains a gobject-based convenience library for programs to
interact with the colord system daemon.
Homepage: http://www.freedesktop.org/software/colord/
Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.1
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.46.5-2ubuntu1.1)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
libcomerr is an attempt to present a common error-handling mechanism to
manipulate the most common form of error code in a fashion that does not
have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: libcommon-sense-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.75-2build1
Depends: perl (>= 5.34.0~), perlapi-5.34.0, perl (<< 5.34.1~)
Description: module that implements some sane defaults for Perl programs
common::sense implements some sane defaults for Perl programs, as defined by
two typical (or not so typical - use your common sense) specimens of Perl
coders.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/common-sense
Package: libcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 320
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.27-1
Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1)
Provides: libcrypt1-dev
Depends: libcrypt1 (= 1:4.4.27-1)
Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1)
Conflicts: libcrypt1-dev, libcrypt2-dev
Description: libcrypt development files
This package contains the files needed for developing applications that
use libcrypt.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: libcrypt1
Protected: yes
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.27-1
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.25)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
libxcrypt is a modern library for one-way hashing of passwords.
It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
bcrypt-based password hashes
It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
as well as a set of extended interfaces like 'crypt_gensalt'.
Original-Maintainer: Marco d'Itri <md@linux.it>
Important: yes
Package: libcryptsetup12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 572
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.4.3-1ubuntu1.1
Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libjson-c5 (>= 0.15), libssl3 (>= 3.0.0~~alpha1), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Package: libctf-nobfd0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.3
Replaces: libbinutils (<< 2.33.50.20191128-1~)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Breaks: libbinutils (<< 2.33.50.20191128-1~)
Description: Compact C Type Format library (runtime, no BFD dependency)
This package includes the libctf-nobfd shared library. The Compact C Type
Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libctf0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 239
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.3
Depends: libbinutils (= 2.38-4ubuntu2.3), libc6 (>= 2.33), zlib1g (>= 1:1.2.0)
Description: Compact C Type Format library (runtime, BFD dependency)
This package includes the libctf-nobfd shared library. The Compact C Type
Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libcups2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.4.1op1-1ubuntu4.11
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Description: Common UNIX Printing System(tm) - Core library
The Common UNIX Printing System (or CUPS(tm)) is a printing system and
general replacement for lpd and the like. It supports the Internet
Printing Protocol (IPP), and has its own filtering driver model for
handling various document types.
.
This package provides the base shared libraries for CUPS.
Homepage: https://github.com/OpenPrinting/cups/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 771
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.81.0-1ubuntu1.14
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh-4 (>= 0.9.0), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by GnuTLS.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: libcurl4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 788
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.81.0-1ubuntu1.20
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh-4 (>= 0.9.0), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by OpenSSL.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: libdata-dump-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.25-1
Depends: perl:any
Description: Perl module to help dump data structures
Data::Dump provides a single function called dump that takes a list of values
as its argument and produces a string as its result. The string contains Perl
code that, when evaled, produces a deep copy of the original arguments. The
string is formatted for easy reading.
.
If called in void context, the dump is printed on standard error instead of
being returned. If you don't like importing a function that overrides Perl's
not-so-useful builtin, then you can also import the same function as "pp"
(the mnemonic for "pretty-print").
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Data-Dump
Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdatrie
Version: 0.2.13-2
Depends: libc6 (>= 2.14)
Description: Double-array trie library
This package provides shared libraries needed to run programs that use the
datrie library. It is usually automatically installed.
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Homepage: https://linux.thai.net/projects/libthai
Package: libdb5.3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg1-0.8ubuntu3
Depends: libc6 (>= 2.34)
Description: Berkeley v5.3 Database Libraries [runtime]
This is the runtime package for programs that use the v5.3 Berkeley
database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Original-Maintainer: Debian Berkeley DB Team <team+bdb@tracker.debian.org>
Package: libdbi1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdbi
Version: 0.9.0-6build2
Depends: libc6 (>= 2.34)
Breaks: libapache2-mod-log-sql-dbi (<= 1.100-11), libdbd-freetds (<< 0.9.0-2), libdbd-mysql (<< 0.9.0-2), libdbd-pgsql (<< 0.9.0-2), libdbd-sqlite (<< 0.9.0-2), libdbd-sqlite3 (<< 0.9.0-2)
Description: DB Independent Abstraction Layer for C -- shared library
libdbi implements a database-independent abstraction layer in C, similar to
the DBI/DBD layer in Perl. Writing one generic set of code, programmers can
leverage the power of multiple databases and multiple simultaneous database
connections by using this framework.
.
This package is the shared library.
Homepage: https://libdbi.sourceforge.net/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 457
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.12.20-2ubuntu4.1
Depends: libc6 (>= 2.34), libsystemd0
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
The daemon can be found in the dbus package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libdbusmenu-glib4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdbusmenu
Version: 16.04.1+18.10.20180917-0ubuntu8
Description: library for passing menus over DBus
libdbusmenu passes a menu structure across DBus so that a program can
create a menu simply without worrying about how it is displayed on the
other side of the bus.
.
This package contains shared libraries to be used by applications.
Homepage: https://launchpad.net/dbusmenu
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>
Package: libdbusmenu-gtk3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdbusmenu
Version: 16.04.1+18.10.20180917-0ubuntu8
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.4), libdbusmenu-glib4 (>= 0.5.90), libgdk-pixbuf-2.0-0 (>= 2.22.1-0ubuntu4), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.14.0)
Description: library for passing menus over DBus - GTK+ version
libdbusmenu passes a menu structure across DBus so that a program can
create a menu simply without worrying about how it is displayed on the
other side of the bus.
.
This package contains shared libraries to be used by GTK+ applications.
Homepage: https://launchpad.net/dbusmenu
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>
Package: libdconf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-3
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.55.2)
Description: simple configuration storage system - runtime library
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains the runtime library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/dconf
Package: libdebconfclient0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.261ubuntu1
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
Debconf is a configuration management system for Debian packages. It is
used by some packages to prompt you for information before they are
installed. cdebconf is a reimplementation of the original debconf in C.
.
This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libdebuginfod-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: elfutils
Version: 0.186-1build1
Depends: debconf (>= 0.5) | debconf-2.0, ucf
Pre-Depends: debconf
Description: configuration to enable the Debian debug info server
This package asks if it should enable use of the Debian debug info
server with debugging tools that use libdebuginfo such as GDB.
.
When this is allowed by the sysadmin, a snippet will be added to the
shell configuration. You will need to restart your shell after
installing this package before the snippet will work.
.
The Debian debug info server will be contacted every time debugging
tools attempt to look up debug info for binaries or libraries but the
server does not log requests for debug info.
.
The Debian debug info server uses https to securely transfer debugging
files but does not offer OpenPGP signing of debug info.
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/elfutils/
Package: libdebuginfod1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.186-1build1
Depends: libc6 (>= 2.33), libcurl3-gnutls (>= 7.28.0), libelf1 (= 0.186-1build1), libdw1 (= 0.186-1build1), libdebuginfod-common (>= 0.186-1build1)
Description: library to interact with debuginfod (development files)
The libdebuginfo1 package provides a library with an interface to interact
with debuginfod.
.
This library is part of elfutils.
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/elfutils/
Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.10-2
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
The supported formats are:
* DEFLATE (raw)
* zlib (a.k.a. DEFLATE with a zlib wrapper)
* gzip (a.k.a. DEFLATE with a gzip wrapper)
.
libdeflate is heavily optimized. It is significantly faster than the zlib
library, both for compression and decompression, and especially on x86
processors. In addition, libdeflate provides optional high compression modes
that provide a better compression ratio than the zlib's "level 9".
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: https://github.com/ebiggers/libdeflate
Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.11-2.1ubuntu4)
Version: 2:1.02.175-2.1ubuntu4
Depends: libc6 (>= 2.33), libdevmapper1.02.1 (>= 2:1.02.97)
Description: Linux Kernel Device Mapper event support library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains the userspace library to help with event monitoring
for devmapper devices, in conjunction with the dmevent daemon.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: libdevmapper1.02.1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 492
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.11-2.1ubuntu4)
Version: 2:1.02.175-2.1ubuntu4
Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libudev1 (>= 183)
Recommends: dmsetup (>= 2:1.02.175-2.1ubuntu4~)
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains the (user-space) shared library for accessing the
device-mapper; it allows usage of the device-mapper through a clean,
consistent interface (as opposed to through kernel ioctls).
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: libdns-export1110
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2262
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9-libs
Version: 1:9.11.19+dfsg-2.1ubuntu3
Depends: libc6 (>= 2.34), libisc-export1105, libssl3 (>= 3.0.0~~alpha1)
Description: Exported DNS Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libdns shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.1ubuntu2.3
Depends: perl:any, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils
Suggests: debian-keyring, gnupg, gpgv, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr
Breaks: dgit (<< 3.13~), pkg-kde-tools (<< 0.15.28~)
Description: Dpkg perl modules
This package provides the perl modules used by the scripts
in dpkg-dev. They cover a wide range of functionality. Among them
there are the following public modules:
.
- Dpkg: core variables
- Dpkg::Arch: architecture handling functions
- Dpkg::Build::Info: build information functions
- Dpkg::BuildFlags: set, modify and query compilation build flags
- Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
- Dpkg::BuildProfiles: parse and manipulate build profiles
- Dpkg::Changelog: parse changelogs
- Dpkg::Changelog::Entry: represents a changelog entry
- Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
- Dpkg::Checksums: generate and parse checksums
- Dpkg::Compression: simple database of available compression methods
- Dpkg::Compression::FileHandle: transparently (de)compress files
- Dpkg::Compression::Process: wrapper around compression tools
- Dpkg::Conf: parse dpkg configuration files
- Dpkg::Control: parse and manipulate Debian control information
(.dsc, .changes, Packages/Sources entries, etc.)
- Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
- Dpkg::Control::Fields: manage (list of known) control fields
- Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
- Dpkg::Control::Info: parse files like debian/control
- Dpkg::Control::Tests: parse files like debian/tests/control
- Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza
- Dpkg::Deps: parse and manipulate dependencies
- Dpkg::Deps::Simple: represents a single dependency statement
- Dpkg::Deps::Multiple: base module to represent multiple dependencies
- Dpkg::Deps::Union: list of unrelated dependencies
- Dpkg::Deps::AND: list of AND dependencies
- Dpkg::Deps::OR: list of OR dependencies
- Dpkg::Deps::KnownFacts: list of installed and virtual packages
- Dpkg::Exit: push, pop and run exit handlers
- Dpkg::Gettext: wrapper around Locale::gettext
- Dpkg::IPC: spawn sub-processes and feed/retrieve data
- Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
example)
- Dpkg::Interface::Storable: base object serializer
- Dpkg::Path: common path handling functions
- Dpkg::Source::Format: manipulate debian/source/format files
- Dpkg::Source::Package: extract Debian source packages
- Dpkg::Substvars: substitute variables in strings
- Dpkg::Vendor: identify current distribution vendor
- Dpkg::Version: parse and manipulate Debian package versions
.
All the packages listed in Suggests or Recommends are used by some of the
modules.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: libdrm-amdgpu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.108)
Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Description: Userspace interface to kernel DRM services -- common files
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
.
This package provides common files for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdrm-intel1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.108), libpciaccess0
Description: Userspace interface to intel-specific kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdrm-nouveau2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.108)
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdrm-radeon1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.108)
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libdrm-common (>= 2.4.113-2~ubuntu0.22.04.1), libc6 (>= 2.33)
Description: Userspace interface to kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
.
This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/
Package: libdumbnet1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdumbnet
Version: 1.12-10
Depends: libc6 (>= 2.14)
Description: dumb, portable networking library -- shared library
libdumbnet provides a simplified, portable interface to several low-level
networking routines, including
* network address manipulation
* kernel arp(4) cache and route(4) table lookup and manipulation
* network firewalling (IP filter, ipfw, ipchains, pdf, ...)
* network interface lookup and manipulation
* raw IP packet and Ethernet frame transmission
.
libdumbnet is known as libdnet in other distributions, but was renamed
in Debian in favour of the older DECnet library 'libdnet'.
.
This package contains the shared library.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://code.google.com/p/libdnet/
Package: libdw1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 729
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.186-1build1
Depends: libbz2-1.0, libc6 (>= 2.34), libelf1 (= 0.186-1build1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.2.3)
Description: library that provides access to the DWARF debug information
libdw1 provides a library that provides access to DWARF debug information
stored inside ELF files.
.
This library is part of elfutils.
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/elfutils/
Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20210910-1build1
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.33), libtinfo6 (>= 6)
Description: BSD editline and history libraries
Command line editor library provides generic line editing,
history, and tokenization functions.
.
It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Package: libefiboot1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6ubuntu2
Depends: libc6 (>= 2.33), libefivar1 (>= 37)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
Library to allow for the manipulation of UEFI variables related to booting.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: https://github.com/rhinstaller/efivar
Package: libefivar1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6ubuntu2
Depends: libc6 (>= 2.34)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
Library to allow for the simple manipulation of UEFI variables.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: https://github.com/rhinstaller/efivar
Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.186-1build1
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
The libelf1 package provides a shared library which allows reading and
writing ELF files on a high level. Third party programs depend on
this package to read internals of ELF files. The programs of the
elfutils package use it also to generate new ELF files.
.
This library is part of elfutils.
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/elfutils/
Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.05-1.1
Depends: perl:any
Description: utility to determine the locale encoding
In many applications it's wise to let Perl use Unicode for the strings it
processes. Most of the interfaces Perl has to the outside world are still byte
based. Programs therefore need to decode byte strings that enter the program
from the outside and encode them again on the way out.
.
The POSIX locale system is used to specify both the language conventions
requested by the user and the preferred character set to consume and output.
The Encode::Locale module looks up the charset and encoding (called a CODESET
in the locale jargon) and arranges for the Encode module to know this encoding
under the name "locale". It means bytes obtained from the environment can be
converted to Unicode strings by calling Encode::encode(locale => $bytes) and
converted back again with Encode::decode(locale => $string).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Encode-Locale
Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1380
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.5.10-1
Depends: libc6 (>= 2.34)
Description: OpenGL function pointer management library
It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
eglGetProcAddress(), etc. from the app developer, with very little
knowledge needed on their part. They get to read GL specs and write
code using undecorated function names like glCompileShader().
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://github.com/anholt/libepoxy
Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.17029-1
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
The Error module provides two interfaces. Firstly "Error" provides a
procedural interface to exception handling. Secondly "Error" is a base class
for errors/exceptions that can either be thrown, for subsequent catch, or can
simply be recorded.
.
Errors in the class "Error" should not be thrown directly, but the user
should throw errors from a sub-class of "Error".
.
Warning: Using the "Error" module is no longer recommended due to the
black-magical nature of its syntactic sugar, which often tends to break. Its
maintainers have stopped actively writing code that uses it, and discourage
people from doing so.
.
Recommended alternatives are Exception::Class (libexception-class-perl),
Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
(libtry-tiny-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Error
Package: libestr0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libestr
Version: 0.1.10-2.1build3
Depends: libc6 (>= 2.14)
Description: Helper functions for handling strings (lib)
The 'libestr' library contains some essential string manipulation
functions and more, like escaping special characters.
.
This package contains the shared library.
Homepage: http://libestr.sourceforge.net/
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Package: libevent-core-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 256
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.33)
Description: Asynchronous event notification library (core)
Libevent is an asynchronous event notification library that provides a
mechanism to execute a callback function when a specific event occurs
on a file descriptor or after a timeout has been reached.
.
It is meant to replace the asynchronous event loop found in
event driven network servers. Currently, libevent supports /dev/poll,
kqueue(2), event ports, select(2), poll(2) and epoll(4).
.
The libevent_core library includes event loops, timers, buffer code,
and various small compatibility functions.
.
If you're writing software that only uses libevent's event loop, you
should link against only the libevent_core library.
Homepage: https://libevent.org/
Package: libexpat1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.4.7-1ubuntu0.3
Depends: libc6 (>= 2.25)
Description: XML parsing C library - runtime library
This package contains the runtime, shared library of expat, the C
library for parsing XML. Expat is a stream-oriented parser in
which an application registers handlers for things the parser
might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libexpat1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 945
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.4.7-1ubuntu0.3
Provides: libexpat-dev
Depends: libexpat1 (= 2.4.7-1ubuntu0.3), libc6-dev | libc-dev
Conflicts: libexpat-dev
Description: XML parsing C library - development kit
This package contains the header file and development libraries of
expat, the C library for parsing XML. Expat is a stream oriented XML
parser. This means that you register handlers with the parser prior
to starting the parse. These handlers are called when the parser
discovers the associated structures in the document being parsed. A
start tag is an example of the kind of structures for which you may
register handlers.
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libext2fs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.1
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.46.5-2ubuntu1.1)
Depends: libc6 (>= 2.34)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package provides the ext2fs and e2p libraries, for userspace software
that directly accesses extended file systems. Programs that use libext2fs
include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.28-1ubuntu1
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.34)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
/etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
fakeroot provides a fake "root environment" by means of LD_PRELOAD and
SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
stat(), and other file-manipulation functions, so that unprivileged
users can (for instance) populate .deb archives with root-owned files;
various build tools use fakeroot for this by default.
.
This package contains the LD_PRELOAD libraries.
Original-Maintainer: Clint Adams <clint@debian.org>
Package: libfastjson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 0.99.9-1build2
Depends: libc6 (>= 2.14)
Description: fast json library for C
The libfastjson library is a fork from json-c with a focus on performance.
.
This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson
Original-Maintainer: Michael Biebl <biebl@debian.org>
Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.33), libuuid1 (>= 2.16)
Description: fdisk partitioning library
The libfdisk library is used for manipulating partition tables. It is
the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: libffi8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.2-4
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.2-4)
Depends: libc6 (>= 2.27)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/libffi/
Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfido2
Version: 1.10.0-1
Depends: libc6 (>= 2.33), libcbor0.8 (>= 0.5.0), libssl3 (>= 3.0.0~~alpha1), libudev1 (>= 183), zlib1g (>= 1:1.2.0)
Description: library for generating and verifying FIDO 2.0 objects
A library for communicating with a FIDO device over USB, and for verifying
attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2)
are supported.
.
This package contains the library.
Original-Maintainer: Debian Authentication Maintainers <pkg-auth-maintainers@lists.alioth.debian.org>
Homepage: https://developers.yubico.com/libfido2/
Package: libfile-basedir-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.09-1
Depends: perl:any, libipc-system-simple-perl
Description: Perl module to use the freedesktop basedir specification
The File::BaseDir module can be used to find directories and files as
specified by the XDG Base Directory Specification. It takes care of
defaults and uses File::Spec to make the output platform specific.
.
For this module the XDG basedir specification 0.6 was used.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-BaseDir
Package: libfile-desktopentry-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.22-2
Depends: perl:any, libfile-basedir-perl, liburi-perl
Recommends: x-terminal-emulator
Description: Perl module to handle freedesktop .desktop files
File::DesktopEntry is used to work with .desktop files. The
format of these files is specified by the freedesktop "Desktop
Entry" specification. For this module version 1.0 of the
specification was used:
.
<http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-1.0.html>
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-DesktopEntry
Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.22-3build7
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
File::FcntlLock is a Perl module to do file locking in an object oriented
fashion using the fcntl(2) system call. This allows locks on parts of a file
as well as on the whole file and overcomes some known problems with flock(2),
on which Perl's flock() function is based.
.
Furthermore due to its design it supports reliable locking over NFS.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-FcntlLock
Package: libfile-listing-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.14-1
Depends: perl:any, libhttp-date-perl
Description: module to parse directory listings
File::Listing exports a single function called parse_dir(), which can be used
to parse directory listings.
.
The first parameter to parse_dir() is the directory listing to parse. It can
be a scalar, a reference to an array of directory lines or a glob
representing a filehandle to read the directory listing from.
.
The second parameter is the time zone to use when parsing time stamps in the
listing. If this value is undefined, then the local time zone is assumed.
.
The third parameter is the type of listing to assume. Currently supported
formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-Listing
Package: libfile-mimeinfo-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.31-1
Depends: perl:any, libencode-locale-perl, libfile-basedir-perl, libfile-desktopentry-perl, shared-mime-info
Recommends: libio-stringy-perl
Description: Perl module to determine file types
File::MimeInfo can be used to determine the mime type of a file. It tries to
implement the freedesktop specification for a shared MIME database.
.
This package also contains two related utilities:
* mimetype: determine a file's mimetype
* mimeopen: open files according to their mimetype
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-MimeInfo
Package: libfont-afm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.20-3
Depends: perl:any
Description: Perl interface to Adobe Font Metrics files
This module implements the Font::AFM class. Objects of this class are
initialised from an AFM-file and allow you to obtain information
about the font and the metrics of the various glyphs in the font.
.
All measurements in AFM files are given in terms of units equal to
1/1000 of the scale factor of the font being used. To compute actual
sizes in a document, these amounts should be multiplied by (scale
factor of font)/1000.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Font-AFM
Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 331
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.13.1-4.2ubuntu5
Provides: libfontconfig
Depends: libc6 (>= 2.33), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), libuuid1 (>= 2.16), fontconfig-config (>= 2.13.1-4.2ubuntu5)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the runtime library needed to launch applications
using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: libfontenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfontenc
Version: 1:1.1.4-1build3
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: X11 font encoding library
libfontenc is a library which helps font libraries portably determine
and deal with different encodings of fonts.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libfontenc
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 870
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.11.1+dfsg-1ubuntu0.2
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.33), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
The FreeType project is a team of volunteers who develop free,
portable and high-quality software solutions for digital typography.
They specifically target embedded systems and focus on providing small,
efficient and ubiquitous products.
.
The FreeType 2 library is their new software font engine. It has been
designed to provide the following important features:
* A universal and simple API to manage font files
* Support for several font formats through loadable modules
* High-quality anti-aliasing
* High portability & performance
.
Supported font formats include:
* TrueType files (.ttf) and collections (.ttc)
* Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
* Type 1 Multiple Master fonts. The FreeType 2 API also provides
routines to manage design instances easily
* Type 1 CID-keyed fonts
* OpenType/CFF (.otf) fonts
* CFF/Type 2 fonts
* Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
the Adobe SVG viewer plugin.
* Windows FNT/FON bitmap fonts
.
This package contains the files needed to run programs that use the
FreeType 2 library.
Homepage: https://www.freetype.org
Original-Maintainer: Hugh McMaster <hugh.mcmaster@outlook.com>
Package: libfribidi0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.8-2ubuntu3.1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
languages.
This package contains the shared libraries.
Homepage: http://www.fribidi.org/
Original-Maintainer: Debian Hebrew Packaging Team <team+hebrew@tracker.debian.org>
Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 322
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse
Version: 2.9.9-5ubuntu3
Depends: libc6 (>= 2.34)
Suggests: fuse
Conflicts: fuse (<< 2.9.9-5ubuntu3)
Description: Filesystem in Userspace (library)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
.
This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libfuse3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 282
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.10.5-1build1
Depends: libc6 (>= 2.34)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
.
This package contains the shared library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki
Package: libfwupd2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 397
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fwupd
Version: 1.7.9-1~22.04.3
Depends: libc6 (>= 2.27), libcurl3-gnutls (>= 7.63.0), libglib2.0-0 (>= 2.53.2), libjcat1 (>= 0.1.4), libjson-glib-1.0-0 (>= 1.5.2)
Description: Firmware update daemon library
fwupd is a daemon to allow session software to update device firmware.
You can either use a GUI software manager like GNOME Software to view and
apply updates, the command-line tool or the system D-Bus interface directly.
Firmware updates are supported for a variety of technologies.
See <https://github.com/fwupd/fwupd> for details
.
This package provides the library used by the daemon.
Homepage: https://github.com/fwupd/fwupd
Original-Maintainer: Debian EFI <debian-efi@lists.debian.org>
Package: libfwupdplugin5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fwupd
Version: 1.7.9-1~22.04.3
Depends: libfwupd2 (= 1.7.9-1~22.04.3), libarchive13 (>= 3.0.4), libc6 (>= 2.14), libgcab-1.0-0 (>= 1.0), libglib2.0-0 (>= 2.67.3), libgudev-1.0-0 (>= 212), libgusb2 (>= 0.3.4), libjcat1 (>= 0.1.4), libxmlb2 (>= 0.3.2)
Description: Firmware update daemon plugin library
fwupd is a daemon to allow session software to update device firmware.
You can either use a GUI software manager like GNOME Software to view and
apply updates, the command-line tool or the system D-Bus interface directly.
Firmware updates are supported for a variety of technologies.
See <https://github.com/fwupd/fwupd> for details
.
This package provides the library for the interface between daemon and plugins.
Homepage: https://github.com/fwupd/fwupd
Original-Maintainer: Debian EFI <debian-efi@lists.debian.org>
Package: libgbm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0), libxcb-randr0
Description: generic buffer management API -- runtime
This package contains the GBM buffer management library. It provides a
mechanism for allocating buffers for graphics rendering tied to Mesa.
.
GBM is intended to be used as a native platform for EGL on drm or openwfd.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libgcab-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcab
Version: 1.4-3build2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.61.2), zlib1g (>= 1:1.1.4)
Description: Microsoft Cabinet file manipulation library
libgcab provides functions to manipulate cabinet (.cab) files,
both for reading and writing their contents.
.
This package contains the shared library.
Original-Maintainer: Stephen Kitt <skitt@debian.org>
Homepage: https://wiki.gnome.org/msitools
Package: libgcc-11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13895
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Replaces: libtsan0 (<< 11.2.0-11)
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), libgcc-s1 (>= 11.4.0-1ubuntu1~22.04), libgomp1 (>= 11.4.0-1ubuntu1~22.04), libitm1 (>= 11.4.0-1ubuntu1~22.04), libatomic1 (>= 11.4.0-1ubuntu1~22.04), libasan6 (>= 11.4.0-1ubuntu1~22.04), liblsan0 (>= 11.4.0-1ubuntu1~22.04), libtsan0 (>= 11.4.0-1ubuntu1~22.04), libubsan1 (>= 11.4.0-1ubuntu1~22.04), libquadmath0 (>= 11.4.0-1ubuntu1~22.04)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Breaks: libtsan0 (<< 11.2.0-11)
Description: GCC support library (development files)
This package contains the headers and static library files necessary for
building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libgcc-s1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:12.3.0-1ubuntu1~22.04)
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.35)
Description: GCC support library
Shared version of the support library, a library of internal subroutines
that GCC uses to overcome shortcomings of particular machines, or
special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libgcrypt20
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.9.4-3ubuntu3
Depends: libc6 (>= 2.33), libgpg-error0 (>= 1.27)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
libgcrypt contains cryptographic functions. Many important free
ciphers, hash algorithms and public key signing algorithms have been
implemented:
.
Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
(Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.0-2ubuntu2
Depends: libc6 (>= 2.29), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libwebp7, libxpm4, zlib1g (>= 1:1.1.4)
Suggests: libgd-tools
Description: GD Graphics Library
GD is a graphics library. It allows your code to quickly draw images
complete with lines, arcs, text, multiple colours, cut and paste from
other images, flood fills, and write out the result as a PNG file.
This is particularly useful in World Wide Web applications, where PNG is
one of the formats accepted for inline images by most browsers.
.
This is the runtime package of the library.
Homepage: http://www.libgd.org/
Original-Maintainer: GD Team <team+gd@tracker.debian.org>
Package: libgdbm-compat4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-1
Depends: libc6 (>= 2.33), libgdbm6 (>= 1.16)
Description: GNU dbm database routines (legacy support runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
This package includes library files, required to run old programs,
that use legacy 'dbm' interface. For new programs, please use modern
interface, provided by libgdbm6 and libgdbm-dev.
Original-Maintainer: Nicolas Mora <babelouest@debian.org>
Homepage: https://gnu.org/software/gdbm
Package: libgdbm3
Status: deinstall ok config-files
Priority: important
Section: libs
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Config-Version: 1.8.3-13.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://directory.fsf.org/project/gdbm/
Package: libgdbm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-1
Depends: libc6 (>= 2.33)
Suggests: gdbm-l10n (= 1.23-1)
Description: GNU dbm database routines (runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
Original-Maintainer: Nicolas Mora <babelouest@debian.org>
Homepage: https://gnu.org/software/gdbm
Package: libgdk-pixbuf-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.3
Replaces: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Depends: libgdk-pixbuf2.0-common (>= 2.42.8+dfsg-1ubuntu0.3), shared-mime-info, libc6 (>= 2.34), libglib2.0-0 (>= 2.59.0), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3)
Recommends: libgdk-pixbuf2.0-bin
Breaks: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Description: GDK Pixbuf library
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgdk-pixbuf-xlib-2.0-0
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf-xlib
Version: 2.40.2-2build4
Replaces: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Depends: shared-mime-info, libc6 (>= 2.14), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.48.0), libx11-6
Recommends: libgdk-pixbuf2.0-bin
Breaks: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Description: GDK Pixbuf library (deprecated Xlib integration)
This package contains a deprecated library to render GdkPixbuf structures
to X drawables using Xlib (libX11).
.
No newly written code should ever use this library.
.
If your existing code depends on gdk-pixbuf-xlib, then you're strongly
encouraged to port away from it.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://www.gtk.org/
Package: libgdk-pixbuf2.0-0
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 22
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf-xlib
Version: 2.40.2-2build4
Depends: libgdk-pixbuf-2.0-0 (>= 2.40.0), libgdk-pixbuf-xlib-2.0-0 (>= 2.40.2-2build4)
Description: GDK Pixbuf library (transitional package)
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
.
This transitional package depends on the main library libgdk-pixbuf-2.0-0
and the deprecated Xlib integration library libgdk-pixbuf-xlib-2.0-0.
.
Packages that only require the main library should depend on
libgdk-pixbuf-2.0-0 | libgdk-pixbuf2.0-0.
.
Packages that require the Xlib integration should port away from it,
or until that can be done, depend on
libgdk-pixbuf-xlib-2.0-0 | libgdk-pixbuf2.0-0.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://www.gtk.org/
Package: libgdk-pixbuf2.0-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.3
Replaces: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.35.4), libglib2.0-0 (>= 2.56.0)
Breaks: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Description: GDK Pixbuf library (thumbnailer)
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
.
This package contains the GDK pixdata compression utility, the thumbnailer
and a utility for converting images into C code.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.3
Description: GDK Pixbuf library - data files
This package contains the common files and translations for the GDK
Pixbuf library.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgeoip1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: geoip
Version: 1.6.12-8
Depends: libc6 (>= 2.33)
Recommends: geoip-database
Suggests: geoip-bin
Description: non-DNS IP-to-country resolver library
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the shared library.
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: https://www.maxmind.com/
Package: libgirepository-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.72.0-1
Provides: libgirepository-1.0-1-with-libffi8 (= 1.72.0-1)
Depends: libglib2.0-0 (>= 2.70.0), libc6 (>= 2.29), libffi8 (>= 3.4)
Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.049-1+b2), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2)
Description: Library for handling GObject introspection data (runtime library)
GObject Introspection is a project for providing machine readable
introspection data of the API of C libraries. This introspection
data can be used in several different use cases, for example
automatic code generation for bindings, API verification and documentation
generation.
.
GObject Introspection contains tools to generate and handle the
introspection data.
.
This package contains a C library for handling the introspection data.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection
Package: libgl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 653
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.14), libglvnd0 (= 1.4.0-1), libglx0 (= 1.4.0-1)
Description: Vendor neutral GL dispatch library -- legacy GL support
This is an implementation of the vendor-neutral dispatch layer for
arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
.
This package contains support for old libGL for compatibility reasons.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Package: libgl1-amber-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 15592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa-amber
Version: 21.3.9-0ubuntu1~22.04.1
Replaces: libgl1-mesa-dri (<< 22.0.0~)
Provides: dri-drivers
Depends: libc6 (>= 2.34), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.38), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (>= 23.0.4), libstdc++6 (>= 5.2), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Conflicts: libgl1-mesa-dri (<< 22.0.0~)
Description: free implementation of the OpenGL API -- Amber DRI modules
This version of Mesa provides GLX and DRI capabilities: it is capable of
both direct and indirect rendering. For direct rendering, it can use DRI
modules from the libgl1-mesa-dri package to accelerate drawing.
.
This package does not include the OpenGL library itself, only the DRI
modules for accelerating direct rendering.
.
For a complete description of Mesa Amber, please look at the
libglx-amber0 package.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://mesa3d.org/
Package: libgl1-mesa-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31988
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Replaces: libgl1-amber-dri (<< 21.3.9)
Depends: libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-intel1 (>= 2.4.38), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (= 23.2.1-1ubuntu3.1~22.04.3), libllvm15, libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libxcb-dri3-0 (>= 1.13), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: libgl1-amber-dri
Breaks: libgl1-amber-dri (<< 21.3.9)
Description: free implementation of the OpenGL API -- DRI modules
This version of Mesa provides GLX and DRI capabilities: it is capable of
both direct and indirect rendering. For direct rendering, it can use DRI
modules from the libgl1-mesa-dri package to accelerate drawing.
.
This package does not include the OpenGL library itself, only the DRI
modules for accelerating direct rendering.
.
For a complete description of Mesa, please look at the
libglx-mesa0 package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libglapi-mesa
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 289
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Depends: libc6 (>= 2.34)
Description: free implementation of the GL API -- shared library
The Mesa GL API module is responsible for dispatching all the gl*
functions. It is intended to be mainly used by both the libgles1-mesa
and libgles2-mesa packages.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4086
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.72.4-0ubuntu2.4
Depends: libc6 (>= 2.34), libffi8 (>= 3.4), libmount1 (>= 2.35.2-7~), libpcre3, libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: gimp (<< 2.10.14-3~), glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 42.9-0ubuntu2.1~), libgirepository-1.0-1 (<< 1.62.0-4~), libgladeui-2-6 (<< 3.22.2), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package contains the shared libraries.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libglib2.0-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 342
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.72.4-0ubuntu2.4
Depends: libglib2.0-data, libc6 (>= 2.34), libelf1 (>= 0.142), libglib2.0-0 (= 2.72.4-0ubuntu2.4)
Description: Programs for the GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package contains the program files which is used for the libraries
and others.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libglib2.0-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.72.4-0ubuntu2.2
Description: Common files for GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package is needed for the runtime libraries to display messages in
languages other than English.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libglvnd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 725
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Replaces: libgldispatch0-nvidia
Depends: libc6 (>= 2.34)
Breaks: libgldispatch0-nvidia
Description: Vendor neutral GL dispatch library
This is an implementation of the vendor-neutral dispatch layer for
arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
.
This package contains the GL dispatch library.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Package: libglx-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Provides: libglx-vendor
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libglapi-mesa (= 23.2.1-1ubuntu3.1~22.04.3), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.7.5), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-randr0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libgl1-mesa-dri
Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2)
Description: free implementation of the OpenGL API -- GLX vendor library
Mesa is a 3-D graphics library with an API which is very similar to
that of OpenGL. To the extent that Mesa utilizes the OpenGL command
syntax or state machine, it is being used with authorization from
Silicon Graphics, Inc. However, the authors make no claim that Mesa
is in any way a compatible replacement for OpenGL or associated with
Silicon Graphics, Inc.
.
This version of Mesa provides GLX and DRI capabilities: it is capable of
both direct and indirect rendering. For direct rendering, it can use DRI
modules from the libgl1-mesa-dri package to accelerate drawing.
.
This package does not include the modules themselves: these can be found
in the libgl1-mesa-dri package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libglx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.4.0-1), libx11-6 (>= 2:1.4.99.1), libglx-mesa0
Description: Vendor neutral GL dispatch library -- GLX support
This is an implementation of the vendor-neutral dispatch layer for
arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
.
This package contains support for GLX.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Package: libgmp10
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.2.1+dfsg-3ubuntu1
Depends: libc6 (>= 2.14)
Breaks: libmath-gmp-perl (<< 2.20-1), libmath-prime-util-gmp-perl (<< 0.51-2), postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
GNU MP is a programmer's library for arbitrary precision
arithmetic (ie, a bignum package). It can operate on signed
integer, rational, and floating point numeric types.
.
It has a rich set of functions, and the functions have a regular
interface.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Package: libgnutls-openssl27
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.3
Depends: libgnutls30 (= 3.7.3-4ubuntu1.3), libc6 (>= 2.34)
Description: GNU TLS library - OpenSSL wrapper
GnuTLS is a portable library which implements the Transport Layer
Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
Transport Layer Security (DTLS 1.0, 1.2) protocols.
.
GnuTLS features support for:
- certificate path validation, as well as DANE and trust on first use.
- the Online Certificate Status Protocol (OCSP).
- public key methods, including RSA and Elliptic curves, as well as password
and key authentication methods such as SRP and PSK protocols.
- all the strong encryption algorithms, including AES and Camellia.
- CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
- HSMs and cryptographic tokens, via PKCS #11.
.
This package contains the runtime library of the GnuTLS OpenSSL wrapper.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libgnutls30
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.3
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libhogweed6 (>= 3.6), libidn2-0 (>= 2.0.0), libnettle8 (>= 3.7~), libp11-kit0 (>= 0.23.18.1), libtasn1-6 (>= 4.14), libunistring2 (>= 0.9.7)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
GnuTLS is a portable library which implements the Transport Layer
Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
Transport Layer Security (DTLS 1.0, 1.2) protocols.
.
GnuTLS features support for:
- certificate path validation, as well as DANE and trust on first use.
- the Online Certificate Status Protocol (OCSP).
- public key methods, including RSA and Elliptic curves, as well as password
and key authentication methods such as SRP and PSK protocols.
- all the strong encryption algorithms, including AES and Camellia.
- CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
- HSMs and cryptographic tokens, via PKCS #11.
.
This package contains the main runtime library.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 320
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.34)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libgpg-error-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libgpg-error
Version: 1.43-3
Replaces: libgpg-error0 (<< 1.32-1.1~)
Breaks: libgpg-error0 (<< 1.32-1.1~)
Enhances: libgpg-error0
Description: library of error values and messages in GnuPG (localization files)
Library that defines common error values, messages, and common
runtime functionality for all GnuPG components. Among these are GPG,
GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
possibly more in the future.
.
It will likely be renamed "gpgrt" in the future.
.
This package contains the translation files for the use in non-English locales.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Package: libgpg-error0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.43-3
Depends: libc6 (>= 2.34)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
Library that defines common error values, messages, and common
runtime functionality for all GnuPG components. Among these are GPG,
GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
possibly more in the future.
.
It will likely be renamed "gpgrt" in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Package: libgpgme11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpgme1.0
Version: 1.16.0-1.2ubuntu4.1
Depends: gnupg (>= 2.1.21-4) | gpg, libassuan0 (>= 2.4.2), libc6 (>= 2.34), libgpg-error0 (>= 1.36)
Recommends: dirmngr, gpg-agent, gpg-wks-client, gpgsm
Description: GPGME - GnuPG Made Easy (library)
GPGME is a wrapper library which provides a C API to access some of the
GnuPG functions, such as encrypt, decrypt, sign, verify, ...
.
This package contains the library.
Homepage: https://www.gnupg.org/related_software/gpgme/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpm
Version: 1.20.7-10build1
Depends: libc6 (>= 2.33)
Suggests: gpm
Description: General Purpose Mouse - shared library
This package provides a library that handles mouse requests
and delivers them to applications. See the description for the 'gpm'
package for more information.
Original-Maintainer: Axel Beckert <abe@debian.org>
Homepage: https://nico.schottelius.org/software/gpm/
Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.14-1build2
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
Graphite is a system that can be used to create and use "smart fonts" capable
of displaying writing systems with various complex behaviors, such as:
contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
stacking diacritics and complex positioning.
.
This library was designed and developed by the NRSI (Non-Roman Script
Initiative) within SIL International (www.sil.org) to act as a complement to
other smart font rendering technologies with limited practical local
extensibility. Its purpose is to help meet the needs of a very large number
of "minority language" communities for local extensibility of complex script
behaviors.
.
The behavior of the rendering engine for a given writing system is specified
through extra tables added to a TrueType font. These tables are generated by
compiling a GDL (Graphite Description Language) source file into a font using
grcompiler.
.
This package contains the shared library.
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: http://graphite.sil.org/
Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 455
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.3
Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.16), libkrb5-3 (= 1.19.2-2ubuntu0.3), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Conffiles:
/etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e obsolete
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the MIT Kerberos
implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: libgstreamer1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2984
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gstreamer1.0
Version: 1.20.3-0ubuntu1
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libdw1 (>= 0.126), libglib2.0-0 (>= 2.70.0), libunwind8, libcap2-bin
Suggests: gstreamer1.0-tools
Breaks: gstreamer1.0-plugins-bad (<< 1.11.1), gstreamer1.0-plugins-base (<< 1.8.0), libgstreamer-plugins-bad1.0-0 (<< 1.13.1)
Description: Core GStreamer libraries and elements
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
This package contains the core library and elements.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <gstreamer1.0@packages.debian.org>
Package: libgtk-3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Provides: gtk3-binver-3.0.0
Depends: adwaita-icon-theme, hicolor-icon-theme, shared-mime-info, libatk-bridge2.0-0 (>= 2.5.3), libatk1.0-0 (>= 2.35.1), libc6 (>= 2.34), libcairo-gobject2 (>= 1.14.0), libcairo2 (>= 1.14.0), libcolord2 (>= 0.1.10), libcups2 (>= 2.3~b6), libepoxy0 (>= 1.4.3), libfontconfig1 (>= 2.12.6), libfribidi0 (>= 0.19.7), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.59.0), libharfbuzz0b (>= 2.2.0), libpango-1.0-0 (>= 1.45.5), libpangocairo-1.0-0 (>= 1.44.0), libpangoft2-1.0-0 (>= 1.44.0), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.14.91), libwayland-egl1 (>= 1.15.0), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.4.5), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6 (>= 2:1.2.99.4), libxinerama1 (>= 2:1.1.4), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.5.0), libgtk-3-common (>= 3.24.33-1ubuntu2.2)
Recommends: libgtk-3-bin, librsvg2-common
Suggests: gvfs
Conffiles:
/etc/gtk-3.0/settings.ini 17193df36387c79f30763b729b8a49a9
Description: GTK graphical user interface library
GTK is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK is suitable
for projects ranging from small one-off tools to complete application
suites.
.
This package contains the shared libraries.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgtk-3-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 337
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: gtk-3-examples (<< 3.24.13)
Depends: gtk-update-icon-cache, libc6 (>= 2.34), libcairo2 (>= 1.14.0), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.57.2), libgtk-3-0 (>= 3.24.33-1ubuntu2.2), libgtk-3-common (>= 3.24.33-1ubuntu2.2)
Breaks: gtk-3-examples (<< 3.24.13)
Description: programs for the GTK graphical user interface library
GTK is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK is suitable
for projects ranging from small one-off tools to complete application
suites.
.
This package contains the utilities which are used by the libraries
and other packages.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgtk-3-common
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 432
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: libgtk-3-dev (<< 3.24.30-3~)
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: libgtk-3-0
Breaks: libgtk-3-dev (<< 3.24.30-3~)
Conffiles:
/etc/gtk-3.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf
Description: common files for the GTK graphical user interface library
GTK is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK is suitable
for projects ranging from small one-off tools to complete application
suites.
.
This package contains the common files which the libraries need.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgtkd-3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 12749
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gtk-d
Version: 3.10.0-1ubuntu1
Depends: libcairo-gobject2, libgtk-3-0, librsvg2-2, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libphobos2-ldc-shared98 (>= 1:1.28.0)
Description: GTK+ graphical user interface library - D bindings
GTK+ is a multi-platform toolkit for creating graphical user interfaces.
Offering a complete set of widgets, GTK+ is suitable for projects ranging
from small one-off tools to complete application suites.
.
This package contains runtime files needed for applications written in D.
Homepage: https://gtkd.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgudev-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgudev (237-2build1)
Version: 1:237-2build1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.38.0), libudev1 (>= 199)
Description: GObject-based wrapper library for libudev
This library makes it much simpler to use libudev from programs already using
GObject. It also makes it possible to easily use libudev from other
programming languages, such as Javascript, because of GObject introspection
support.
Homepage: https://wiki.gnome.org/Projects/libgudev
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libgusb2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgusb
Version: 0.3.10-1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.44.0), libusb-1.0-0 (>= 2:1.0.22)
Recommends: usb.ids
Description: GLib wrapper around libusb1
GUsb is a GObject wrapper for libusb1 that makes it easy to do
asynchronous control, bulk and interrupt transfers with proper
cancellation and integration into a mainloop.
.
This package contains the GUsb shared library.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: http://www.hughski.com/downloads.html
Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 2.7.4-1ubuntu3.1
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.33), libfreetype6 (>= 2.9.1), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: libhogweed6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 336
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.7.3-1build2
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg), libnettle8
Description: low level cryptographic library (public-key cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the asymmetric cryptographic algorithms, which,
require the GNU multiple precision arithmetic library (libgmp) for
their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Package: libhtml-form-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.07-1
Depends: perl:any, libhtml-parser-perl, libhttp-message-perl, liburi-perl
Description: module that represents an HTML form element
Objects of the HTML::Form class represents a single HTML <form> ... </form>
instance. A form consists of a sequence of inputs that usually have names,
and which can take on various values. The state of a form can be tweaked and
it can then be asked to provide HTTP::Request objects that can be passed to
the request() method of LWP::UserAgent.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Form
Package: libhtml-format-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.12-1.1
Depends: perl:any, libfont-afm-perl, libhtml-tree-perl
Description: module for transforming HTML into various formats
HTML::Formatter is a base class for various formatters, which are modules
that traverse an HTML syntax tree and produce various output file formats.
There are currently three formatter classes included:
.
* HTML::FormatText for converting to plain human-readable text
* HTML::FormatPS for converting to PostScript
* HTML::FormatRTF for converting to Microsoft's Rich Text Format (RTF)
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Format
Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.76-1build2
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
HTML::Parser is a collection of modules useful for handling HTML documents.
These modules used to be part of the libwww-perl distribution, but are now
unbundled in order to facilitate a separate development track.
.
Objects of the HTML::Parser class will recognize markup and separate it from
content data. As different kinds of markup are recognized, the corresponding
event handler is invoked. The document to be parsed may also be supplied in
arbitrary chunks, making on-the-fly parsing of network documents possible.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Parser
Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.20-4
Depends: perl
Description: data tables pertaining to HTML
HTML::Tagset contains data tables useful in dealing with HTML. For instance,
it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
which cannot have content. It provides no functions or methods.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Tagset
Package: libhtml-tree-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 481
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.07-2
Depends: perl, libhtml-parser-perl, libhtml-tagset-perl
Recommends: libhtml-format-perl, libwww-perl
Description: Perl module to represent and create HTML syntax trees
HTML::Tree is a collection of modules that represent, create and extract
information from HTML syntax trees. These modules used to be part of
the libwww-perl distribution, but are now unbundled in order to
facilitate a separate development track.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Tree
Package: libhttp-cookies-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.10-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl
Description: HTTP cookie jars
This class is for objects that represent a "cookie jar" -- that is, a
database of all the HTTP cookies that a given LWP::UserAgent object knows
about.
.
Cookies are a general mechanism which server side connections can use to both
store and retrieve information on the client side of the connection. For more
information about cookies refer to
<URL:http://curl.haxx.se/rfc/cookie_spec.html> and
<URL:http://www.cookiecentral.com/>. HTTP::Cookies also implements the new
style cookies described in RFC 2965. The two variants of cookies are supposed
to be able to coexist happily.
.
Instances of the class HTTP::Cookies are able to store a collection of
Set-Cookie2: and Set-Cookie: headers and are able to use this information to
initialize Cookie-headers in HTTP::Request objects. The state of a
HTTP::Cookies object can be saved in and restored from files.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Cookies
Package: libhttp-daemon-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.13-1ubuntu0.1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl, libio-socket-ip-perl, liblwp-mediatypes-perl, libsocket-perl
Description: simple http server class
Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen on a
socket for incoming requests. The HTTP::Daemon is a subclass of
IO::Socket::IP, so you can perform socket operations directly on it too.
.
The accept() method will return when a connection from a client is available.
The returned value will be an HTTP::Daemon::ClientConn object which is
another IO::Socket::IP subclass. Calling the get_request() method on this
object will read data from the client and return an HTTP::Request object. The
ClientConn object also provide methods to send back various responses.
.
This HTTP daemon does not fork(2) for you. Your application, i.e. the user of
the HTTP::Daemon is responsible for forking if that is desirable. Also note
that the user is responsible for generating responses that conform to the
HTTP/1.1 protocol.
Homepage: https://metacpan.org/release/HTTP-Daemon
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.05-1
Depends: perl, libtimedate-perl, libtime-local-perl (>= 1.28)
Description: module of date conversion routines
HTTP::Date provides functions that deal the date formats used by the HTTP
protocol (and then some more). Only the first two functions, time2str() and
str2time(), are exported by default.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Date
Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.36-1
Depends: perl:any, libencode-locale-perl, libencode-perl (>= 3.01), libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Recommends: libclone-perl
Description: perl interface to HTTP style messages
The HTTP::Message distribution contains classes useful for representing the
messages passed in HTTP style communication. These are classes representing
requests, responses and the headers contained within them.
.
The HTTP::Headers class encapsulates HTTP-style message headers. The headers
consist of attribute-value pairs also called fields, which may be repeated,
and which are printed in a particular order. The field names are cases
insensitive.
.
Instances of this class are usually created as member variables of the
HTTP::Request and HTTP::Response classes, internal to the library.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Message
Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.01-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libhttp-message-perl
Breaks: libwww-perl (<< 6.00)
Description: implementation of content negotiation
HTTP::Negotiate provides a complete implementation of the HTTP content
negotiation algorithm. Content negotiation allows for the selection of a
preferred content representation based upon attributes of the negotiable
variants and the value of the various Accept* header fields in the request.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Negotiate
Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1build2
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.33), x11-common
Description: X11 Inter-Client Exchange library
This package provides the main interface to the X11 Inter-Client Exchange
library, which allows for communication of data between X clients.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libicu70
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34444
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 70.1-2
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains the runtime
libraries for ICU.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://icu.unicode.org/
Package: libidn2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 220
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.2-2build1
Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) library
Libidn2 implements the revised algorithm for internationalized domain
names called IDNA2008/TR46.
.
This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>
Package: libinih1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libinih
Version: 53-1ubuntu3
Depends: libc6 (>= 2.4)
Description: simple .INI file parser
inih (INI Not Invented Here) is a simple .INI file parser written in C.
It's only a couple of pages of code, and it was designed to be small and
simple, so it's good for embedded systems. It's also more or less
compatible with Python's ConfigParser style of .INI files, including
RFC 822-style multi-line syntax and name: value entries.
Homepage: https://github.com/benhoyt/inih
Original-Maintainer: Yangfl <mmyangfl@gmail.com>
Package: libintl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 4321
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.26-3build2
Depends: perl:any
Recommends: libintl-xs-perl
Description: Uniforum message translations system compatible i18n library
libintl-perl is an internationalization library for Perl that aims to be
compatible with the Uniforum message translations system as implemented for
example in GNU gettext.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/libintl-perl
Package: libintl-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libintl-perl
Version: 1.26-3build2
Depends: libintl-perl (= 1.26-3build2), perl, perlapi-5.34.0, libc6 (>= 2.34)
Description: XS Uniforum message translations system compatible i18n library
libintl-perl is an internationalization library for Perl that aims to be
compatible with the Uniforum message translations system as implemented for
example in GNU gettext.
.
This package contains the XS Implementation of Uniforum Message Translation,
which is, thanks to the use of C code and libraries, a little bit faster than
the pure Perl implementation.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/libintl-perl
Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.004-2
Depends: perl:any
Description: open an HTML file with automatic charset detection
IO::HTML provides an easy way to open a file containing HTML while
automatically determining its encoding. It uses the HTML5 encoding
sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-HTML
Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 561
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.074-2
Depends: perl:any, libnet-ssleay-perl, netbase
Recommends: libio-socket-ip-perl | libio-socket-inet6-perl, libsocket-perl | libsocket6-perl, liburi-perl | libnet-libidn-perl | libnet-idn-encode-perl
Suggests: ca-certificates
Description: Perl module implementing object oriented interface to SSL sockets
This module is a true drop-in replacement for IO::Socket::INET that
uses SSL to encrypt data before it is transferred to a remote server
or client. IO::Socket::SSL supports all the extra features that one
needs to write a full-featured SSL client or server application:
multiple SSL contexts, cipher selection, certificate verification, and
SSL version selection. As an extra bonus, it works perfectly with
mod_perl.
.
IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
libio-socket-inet6-perl is installed.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-Socket-SSL
Package: libio-stringy-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: io-stringy
Version: 2.111-3
Depends: perl
Description: modules for I/O on in-core objects (strings/arrays)
IO::stringy primarily provides modules for performing both traditional and
object-oriented I/O on things *other* than normal filehandles; in particular,
IO::Scalar, IO::ScalarArray, and IO::Lines.
.
The libio-stringy-perl package provides the following modules:
.
* IO::AtomicFile - write a file which is updated atomically
* IO::InnerFile - define a file inside another file
* IO::Lines - IO:: interface for reading/writing an array of lines
* IO::Scalar - IO:: interface for reading/writing a scalar
* IO::ScalarArray - IO:: interface for reading/writing an array of scalars
* IO::Stringy - I/O on in-core objects like strings and arrays
* IO::Wrap - wrap raw filehandles in IO::Handle interface
* IO::WrapTie - wrap tieable objects in IO::Handle interface
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-stringy
Package: libip4tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.1
Depends: libc6 (>= 2.28)
Description: netfilter libip4tc library
The iptables/xtables framework has been replaced by nftables. You should
consider migrating now.
.
This package contains the user-space iptables (IPv4) C library from the
Netfilter xtables framework.
.
iptables IPv4 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libip6tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.1
Depends: libc6 (>= 2.28)
Description: netfilter libip6tc library
The iptables/xtables framework has been replaced by nftables. You should
consider migrating now.
.
This package contains the user-space iptables (IPv6) C library from the
Netfilter xtables framework.
.
iptables IPv6 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libipc-system-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.30-1
Depends: perl:any
Description: Perl module to run commands simply, with detailed diagnostics
IPC::System::Simple takes the hard work out of calling external commands; it
provides replacements for system() and the backtick operator that will either
succeed, or die with rich diagnostic messages on errors.
.
The module also includes the ability to specify acceptable exit values, trap
errors, or process diagnostics.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IPC-System-Simple
Package: libipt2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: intel-processor-trace
Version: 2.0.5-1
Depends: libc6 (>= 2.33)
Description: Intel Processor Trace Decoder Library
Intel's reference implementation for decoding Intel PT.
.
Go to https://software.intel.com/en-us/intel-platform-analysis-library
for sample code that uses the library.
Original-Maintainer: Victor Seva <vseva@debian.org>
Homepage: https://github.com/intel/libipt
Package: libisc-export1105
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 510
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9-libs
Version: 1:9.11.19+dfsg-2.1ubuntu3
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Description: Exported ISC Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libisc shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Package: libisl23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.24-2build1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg)
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
isl is a library for manipulating sets and relations of integer points
bounded by linear constraints. Supported operations on sets include
intersection, union, set difference, emptiness check, convex hull,
(integer) affine hull, integer projection, and computing the lexicographic
minimum using parametric integer programming. It also includes an ILP solver
based on generalized basis reduction.
.
This package contains the runtime library.
Homepage: http://isl.gforge.inria.fr/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libisns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 492
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: open-isns
Version: 0.101-0ubuntu2
Depends: libc6 (>= 2.33), libssl3 (>= 3.0.0~~alpha1)
Recommends: netbase
Description: Internet Storage Name Service - shared libraries
Open-iSNS is an implementation of the Internet Storage Name Service
(iSNS), according to RFC 4171, which facilitates automated discovery,
management, and configuration of iSCSI and Fibre Channel devices on a
TCP/IP network.
.
This package provides the libisns shared library for use in client
applications.
Homepage: https://github.com/open-iscsi/open-isns
Original-Maintainer: Debian iSCSI Maintainers <open-isns@packages.debian.org>
Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.34)
Description: GNU Transactional Memory Library
GNU Transactional Memory Library (libitm) provides transaction support for
accesses to the memory of a process, enabling easy-to-use synchronization of
accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jansson
Version: 2.13.1-1.1build3
Depends: libc6 (>= 2.14)
Description: C library for encoding, decoding and manipulating JSON data
Jansson is a C library for encoding, decoding and manipulating JSON data.
.
It features:
* Simple and intuitive API and data model
* Comprehensive documentation
* No dependencies on other libraries
* Full Unicode support (UTF-8)
* Extensive test suite
Homepage: http://www.digip.org/jansson/
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-3.1ubuntu0.22.04.1
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
JBIG-KIT provides a portable library of compression and decompression functions
with a documented interface that you can include very easily into your image or
document processing software.
.
This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Package: libjcat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjcat
Version: 0.1.9-1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.61.2), libgnutls30 (>= 3.7.0), libgpg-error0 (>= 1.14), libgpgme11 (>= 1.2.0), libjson-glib-1.0-0 (>= 1.5.2)
Description: JSON catalog library
The libjcat library assembles checksum and metadata into a JSON based catalog.
.
This is used by other software to validate metadata.
Original-Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Homepage: https://github.com/hughsie/libjcat
Package: libjemalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 756
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jemalloc
Version: 5.2.1-4ubuntu1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4)
Description: general-purpose scalable concurrent malloc(3) implementation
A library providing a malloc(3) implementation for multi-threaded processes on
multi-processor systems.
.
Notable features are reduced lock contention, predictable low fragmentation,
and introspection with heap profiling.
Homepage: http://jemalloc.net/
Original-Maintainer: Faidon Liambotis <paravoid@debian.org>
Package: libjpeg-turbo8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 543
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 2.1.2-0ubuntu1
Replaces: libjpeg8 (<< 8c-2ubuntu5)
Depends: libc6 (>= 2.14)
Breaks: libjpeg8 (<< 8c-2ubuntu5)
Description: IJG JPEG compliant runtime library.
Runtime library supporting the Independent JPEG Group's standard
for JPEG files.
.
This package contains the shared library which is a drop in
replacement for libjpeg8, which has better performance than
standard libjpeg by use of SIMD and other optimizations.
Homepage: http://libjpeg-turbo.virtualgl.org/
Package: libjpeg8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu10
Depends: libjpeg-turbo8 (>= 1.1.90+svn722-1ubuntu6)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
libjpeg8 dependency package, depending on libjpeg-turbo8.
Package: libjs-highlight.js
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 2111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: highlight.js
Version: 9.18.5+dfsg1-1
Provides: libjs-highlight
Recommends: javascript-common
Description: JavaScript library for syntax highlighting
Highlight.js is a JavaScript library which automatically detects the
language of code blocks in a web page, and provides syntax highlighting
for them. The library supports more than fifty languages and is bundled
with more than twenty style themes.
.
This package contains the library highlight.js usable in a web browser.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://highlightjs.org/
Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 679
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: node-jquery
Version: 3.6.0+dfsg+~3.5.13-1
Recommends: javascript-common
Description: JavaScript library for dynamic web applications
jQuery is a fast, concise, JavaScript Library
that simplifies how you traverse HTML documents, handle events,
perform animations, and add Ajax interactions to your web pages.
jQuery is designed to change the way that you write JavaScript.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://jquery.com/
Package: libjs-sphinxdoc
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 194
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sphinx
Version: 4.3.2-1
Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1)
Description: JavaScript support for Sphinx documentation
Sphinx is a tool for producing documentation for Python projects, using
reStructuredText as markup language.
.
This package provides JavaScript code for documentation generated by Sphinx.
Homepage: https://www.sphinx-doc.org/
Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.13.2~dfsg-2
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
Underscore is a utility-belt library for JavaScript that provides a lot
of the functional programming support that you would expect in
Prototype.js (or Ruby), but without extending any of the built-in
JavaScript objects. It's the tie to go along with jQuery's tux.
.
Underscore provides 60-odd functions that support both the usual
functional suspects: map, select, invoke - as well as more specialized
helpers: function binding, javascript templating, deep equality
testing, and so on. It delegates to built-in functions, if present, so
modern browsers will use the native implementations of forEach, map,
reduce, filter, every, some and indexOf.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://underscorejs.org/
Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.15-3~ubuntu1.22.04.2
Depends: libc6 (>= 2.33)
Description: JSON manipulation library - shared library
This library allows you to easily construct JSON objects in C,
output them as JSON formatted strings and parse JSON formatted
strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki
Original-Maintainer: Nicolas Mora <babelouest@debian.org>
Package: libjson-glib-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 210
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-glib
Version: 1.6.6-1build1
Depends: libjson-glib-1.0-common (>= 1.6.6-1build1), libc6 (>= 2.4), libglib2.0-0 (>= 2.55.2)
Description: GLib JSON manipulation library
JSON-GLib is a library for parsing, generating and manipulating JavaScript
Object Notation (JSON) data streams using the GLib type system. It allows
manipulating JSON data types with a Document Object Model API. It also
allows serializing and deserializing simple or complex GObjects to and
from JSON data types.
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libjson-glib-1.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: json-glib
Version: 1.6.6-1build1
Description: GLib JSON manipulation library (common files)
JSON-GLib is a library for parsing, generating and manipulating JavaScript
Object Notation (JSON) data streams using the GLib type system. It allows
manipulating JSON data types with a Document Object Model API. It also
allows serializing and deserializing simple or complex GObjects to and
from JSON data types.
.
This package contains the translations files.
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libjson-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.04000-1
Depends: perl:any
Recommends: libjson-xs-perl
Description: module for manipulating JSON-formatted data
JSON is a Perl module for manipulating data stored in the format of the same
name. JavaScript Object Notation (JSON) is a simple data serialization format
(defined in RFC 4627) that serves as an alternative to XML.
.
The primary purpose of this module is to select an appropriate backend JSON
implementation. It prefers either JSON::XS (see libjson-xs-perl) or JSON::PP
(see libjson-pp-perl), but will fall back on a backport implementation if
neither are available.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/JSON
Package: libjson-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.030-1build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libcommon-sense-perl, libtypes-serialiser-perl
Breaks: libjson-perl (<< 2.90)
Description: module for manipulating JSON-formatted data (C/XS-accelerated)
JSON::XS is a module for manipulating data stored in the JavaScript Object
Notation (JSON) serialization format (defined in RFC 4627), which serves as
an alternative to XML.
.
This C/XS-accelerated JSON implementation confers significant performance
gains if available. After installing this package, any code using the JSON
module (see libjson-perl) will automagically benefit from this.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/JSON-XS
Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.3
Depends: libc6 (>= 2.33), libkrb5support0 (>= 1.16)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime cryptography libraries used by
applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.1-2ubuntu3
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
Keyutils is a set of utilities for managing the key retention facility in the
kernel, which can be used by filesystems, block devices and more to gain and
retain the authorization and encryption keys required to perform secure
operations.
.
This package provides a wrapper library for the key management facility system
calls.
Homepage: https://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>
Package: libklibc
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: klibc
Version: 2.0.10-4
Description: minimal libc subset for use with initramfs
klibc is intended to be a minimalistic libc subset for use with
initramfs. It is deliberately written for small size, minimal
entanglement, and portability, not speed. It is definitely a work in
progress, and a lot of things are still missing.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Package: libkmod2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 29-1ubuntu1
Depends: libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0)
Description: libkmod shared library
This library provides an API for insertion, removal, configuration and
listing of kernel modules.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1052
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.3
Depends: libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.19.2-2ubuntu0.3), libssl3 (>= 3.0.0~~alpha1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the main Kerberos v5 API
used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.3
Depends: libc6 (>= 2.34)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.16), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16)
Description: MIT Kerberos runtime libraries - Support library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains an internal runtime support library used by other
Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.6.0-2ubuntu0.2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: X.509 and CMS support library
KSBA (pronounced Kasbah) is a library to make X.509 certificates as
well as the CMS easily accessible by other applications. Both
specifications are building blocks of S/MIME and TLS.
.
KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
Encoder, Certificate Handling and CMS Handling.
.
This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.12~rc1-2build2
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
LittleCMS 2 intends to be a small-footprint color management engine, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC) of color management. LittleCMS 2 is a full
implementation of ICC specification 4.2 plus all addendums. It fully supports
all V2 and V4 profiles, including abstract, devicelink and named color
profiles.
.
This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <tweber@debian.org>
Package: libldap-2.5-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 565
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.5.16+dfsg-0ubuntu0.22.04.1
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libsasl2-2 (>= 2.1.27+dfsg2)
Recommends: libldap-common
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
These are the run-time libraries for the OpenLDAP (Lightweight Directory
Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Package: libldap-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.5.16+dfsg-0ubuntu0.22.04.1
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
/etc/ldap/ldap.conf 4f02c6860a58b7402a4b5c5ec24aa7b2
Description: OpenLDAP common files for libraries
These are common files for the run-time libraries for the OpenLDAP
(Lightweight Directory Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Package: libldb2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 608
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ldb
Version: 2:2.4.4-0ubuntu0.22.04.2
Replaces: libldb0
Depends: libc6 (>= 2.34), libldap-2.5-0 (>= 2.5.4), liblmdb0 (>= 0.9.9), libtalloc2 (>= 2.3.1~), libtdb1 (>= 1.4.3~), libtevent0 (>= 0.10.2~)
Breaks: ldb-tools (<< 1.1.30~), libldb0, libldb1 (<< 2:2~), libsamdb0 (<< 4.0.0~alpha17~git20110724.dfsg1-1), python-samba (<< 2:4.7.0~), samba (<< 2:4.7.0~), samba-dsdb-modules (<< 2:4.7.0~), samba-libs (<< 2:4.7.0~), samba-testsuite (<< 2:4.7.0~)
Description: LDAP-like embedded database - shared library
ldb is a LDAP-like embedded database built on top of TDB.
.
It provides a fast database with an LDAP-like API designed
to be used within an application. In some ways it can be seen as a
intermediate solution between key-value pair databases and a real LDAP
database.
.
This package contains the shared library file.
Homepage: https://ldb.samba.org/
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: libllvm11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81609
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-11
Version: 1:11.1.0-6
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 11), libtinfo6 (>= 6), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
LLVM is a collection of libraries and tools that make it easy to build
compilers, optimizers, just-in-time code generators, and many other
compiler-related programs.
.
This package contains the LLVM runtime library.
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Homepage: https://www.llvm.org/
Package: libllvm14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106918
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-14
Version: 1:14.0.0-1ubuntu1.1
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
LLVM is a collection of libraries and tools that make it easy to build
compilers, optimizers, just-in-time code generators, and many other
compiler-related programs.
.
This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Package: libllvm15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-15
Version: 1:15.0.7-0ubuntu0.22.04.3
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
LLVM is a collection of libraries and tools that make it easy to build
compilers, optimizers, just-in-time code generators, and many other
compiler-related programs.
.
This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Package: liblmdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lmdb
Version: 0.9.24-1build2
Depends: libc6 (>= 2.34)
Description: Lightning Memory-Mapped Database shared library
This package contains the LMDB shared library.
.
Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact
key-value embedded data store developed for the OpenLDAP Project. It uses
memory-mapped files, so it has the read performance of a pure in-memory
database while still offering the persistence of standard disk-based
databases, and is only limited to the size of the virtual address space, (it
is not limited to the size of physical RAM).
Homepage: http://symas.com/mdb/
Original-Maintainer: LMDB <lmdb@packages.debian.org>
Package: liblocale-gettext-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.07-4build3
Depends: libc6 (>= 2.34)
Pre-Depends: perl-base, perlapi-5.34.0
Description: module using libc functions for internationalization in Perl
The Locale::gettext module permits access from perl to the gettext() family of
functions for retrieving message strings from databases constructed
to internationalize software.
.
It provides gettext(), dgettext(), dcgettext(), textdomain(),
bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
and dngettext().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/gettext
Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2961
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
LeakSanitizer (Lsan) is a memory leak detector which is integrated
into AddressSanitizer.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-15build2
Depends: libc6 (>= 2.34)
Description: System independent dlopen wrapper for GNU libtool
This package contains the run-time libltdl library.
.
A small library that aims at hiding the various difficulties of
dlopening libraries from programmers. It is a system independent
dlopen wrapper for GNU libtool.
.
It supports the following dlopen interfaces:
* dlopen (Solaris, Linux and various BSD flavors)
* shl_load (HP-UX)
* LoadLibrary (Win16 and Win32)
* load_add_on (BeOS)
* GNU DLD (emulates dynamic linking for static libraries)
* libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: liblua5.1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 405
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lua5.1
Version: 5.1.5-8.1build4
Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.1
Lua is a powerful, light-weight programming language designed for extending
applications. The language engine is accessible as a library, having a C
API which allows the application to exchange data with Lua programs and also
to extend Lua with C functions. Lua is also used as a general-purpose,
stand-alone language through the simple command line interpreter provided.
.
This package contains runtime libraries. You shouldn't need to install it
explicitly.
Original-Maintainer: John V. Belmonte <jbelmonte@debian.org>
Homepage: http://www.lua.org
Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lua5.3
Version: 5.3.6-1build1
Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
Lua is a powerful, light-weight programming language designed for extending
applications. The language engine is accessible as a library, having a C
API which allows the application to exchange data with Lua programs and also
to extend Lua with C functions. Lua is also used as a general-purpose,
stand-alone language through the simple command line interpreter provided.
.
This package contains runtime libraries. You shouldn't need to install it
explicitly.
Homepage: http://www.lua.org
Original-Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Package: liblvm2cmd2.03
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2938
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.03.11-2.1ubuntu4
Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.33), libselinux1 (>= 3.1~), libsystemd0 (>= 222), libudev1 (>= 183), dmeventd
Description: LVM2 command library
This package contains the lvm2cmd shared library.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.04-1
Depends: perl
Description: module to guess media type for a file or a URL
LWP::MediaTypes provides functions for handling media (also known as MIME)
types and encodings. The mapping from file extensions to media types is
defined by the media.types file. If the ~/.media.types file exists it is used
instead. For backwards compatibility it will also look for ~/.mime.types.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/LWP-MediaTypes
Package: liblwp-protocol-https-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.10-1
Depends: perl:any, ca-certificates, libio-socket-ssl-perl, libnet-http-perl, libwww-perl
Suggests: libcrypt-ssleay-perl
Description: HTTPS driver for LWP::UserAgent
The LWP::Protocol::https module provides support for using HTTPS schemed URLs
with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so
you don't use it directly. Once the module is installed LWP is able to access
sites using HTTP over SSL/TLS.
.
If hostname verification is requested by LWP::UserAgent's ssl_opts, and
neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be
the one provided by ca-certificates.
.
This module used to be bundled with libwww-perl, but it was unbundled in
v6.02 in order to be able to declare its dependencies properly for the CPAN
tool-chain. Applications that need HTTPS support can just declare their
dependency on LWP::Protocol::https and will no longer need to know what
underlying modules to install.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/LWP-Protocol-https
Package: liblxc-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 1:5.0.0~git2209-g5a7b9ce67-0ubuntu1
Replaces: lxc-common, lxc-templates (<< 3.0.0~beta1-0ubuntu1~), lxc-utils (<< 1:4.0.0-0ubuntu1~), lxc1 (<< 3.0.0~beta2-0ubuntu2~)
Provides: lxc-common
Depends: liblxc1 (= 1:5.0.0~git2209-g5a7b9ce67-0ubuntu1), libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcc-s1 (>= 3.3.1)
Breaks: lxc-templates (<< 3.0.0~beta1-0ubuntu1~), lxc-utils (<< 1:4.0.0-0ubuntu1~), lxc1 (<< 3.0.0~beta2-0ubuntu2~)
Conflicts: lxc-common
Conffiles:
/etc/apparmor.d/abstractions/lxc/container-base 43204001503ac003ca0045a3a2fe4218
/etc/apparmor.d/abstractions/lxc/start-container bac23780850af29653dc18bf0186dd8a
/etc/apparmor.d/lxc-containers 78fd8b29fb81887bdab6313b3f5e6b3d
/etc/apparmor.d/lxc/lxc-default eae02786d40a1ff7d317362d181f6eee
/etc/apparmor.d/lxc/lxc-default-cgns 9a9d2f52eac72cc8514c7b957331996e
/etc/apparmor.d/lxc/lxc-default-with-mounting 5e239a4100457fc09b4f02327283259d
/etc/apparmor.d/lxc/lxc-default-with-nesting 862b2240e2a99c145057ff1f9e91f5d0
/etc/apparmor.d/usr.bin.lxc-start e3822e488353a11a11387a4b3a3132b2
Description: Linux Containers userspace tools (common tools)
Containers are insulated areas inside a system, which have their own namespace
for filesystem, network, PID, IPC, CPU and memory allocation and which can be
created using the Control Group and Namespace features included in the Linux
kernel.
.
This package contains a few binaries and security profiles required by
all liblxc users.
Homepage: https://linuxcontainers.org
Package: liblxc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1034
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 1:5.0.0~git2209-g5a7b9ce67-0ubuntu1
Depends: cgroup-lite | systemd, liblxc-common (= 1:5.0.0~git2209-g5a7b9ce67-0ubuntu1), rsync, libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcc-s1 (>= 3.3.1), libseccomp2 (>= 2.5.0), libselinux1 (>= 3.1~)
Recommends: lxcfs, uidmap
Description: Linux Containers userspace tools (library)
Containers are insulated areas inside a system, which have their own namespace
for filesystem, network, PID, IPC, CPU and memory allocation and which can be
created using the Control Group and Namespace features included in the Linux
kernel.
.
This package contains the libraries.
Homepage: https://linuxcontainers.org
Package: liblz4-1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.9.3-2build2
Replaces: liblz4-1a
Depends: libc6 (>= 2.14)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
LZ4 is a very fast lossless compression algorithm, providing compression speed
at 400 MB/s per core, scalable with multi-cores CPU. It also features an
extremely fast decoder, with speed in multiple GB/s per core, typically
reaching RAM speed limits on multi-core systems.
.
This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Package: liblzf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblzf
Version: 3.6-3
Depends: libc6 (>= 2.4)
Description: Very small data compression library
This library implements the very, very fast LZF compression algorithm written
in C. Compression ratios are moderate with 40 to 50 percent for typical
binary data, but decompression speed is basically at unoptimized memcpy
speed.
Original-Maintainer: Timo Röhling <timo@gaussglocke.de>
Homepage: http://software.schmorp.de/pkg/liblzf.html
Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 290
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.5-2ubuntu1
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
The native format of liblzma is XZ; it also supports raw (headerless)
streams and the older LZMA format used by lzma. (For 7-Zip's related
format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.10-2build3
Depends: libc6 (>= 2.14)
Description: data compression library
LZO is a portable, lossless data compression library.
It offers pretty fast compression and very fast decompression.
Decompression requires no memory. In addition there are slower
compression levels achieving a quite competitive compression ratio
while still decompressing at this very high speed.
Homepage: https://www.oberhumer.com/opensource/lzo/
Original-Maintainer: Stephen Kitt <skitt@debian.org>
Package: libmagic-mgc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.41-3ubuntu0.1
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
This package provides the compiled magic file "magic.mgc". It has
been separated from libmagic1 in order to meet the multiarch
requirements without breaking applications that expect this file
at its absolute path.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: libmagic1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.41-3ubuntu0.1
Depends: libbz2-1.0, libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.41-3ubuntu0.1)
Suggests: file
Conffiles:
/etc/magic 272913026300e7ae9b5e2d51f138e674
/etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
This library can be used to classify files according to magic number
tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.21-1
Depends: perl, libnet-perl, libnet-smtp-ssl-perl, libtest-simple-perl, libtimedate-perl
Description: modules to manipulate email in perl programs
MailTools is a set of perl modules which provide an easy interface to
manipulating email in an object-oriented fashion.
.
Mail::Address - Parse mail addresses
Mail::Cap - Parse mailcap files
Mail::Field - Base class for manipulation of mail header fields
Mail::Field::AddrList - object representation of e-mail address lists
Mail::Field::Date - a date header field
Mail::Field::Generic - implementation for inspecific fields
Mail::Filter - Filter mail through multiple subroutines
Mail::Header - manipulate MIME headers
Mail::Internet - manipulate email messages
Mail::Mailer - Simple interface to electronic mailing mechanisms
Mail::Send - Simple electronic mail interface
Mail::Util - mail utility functions
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/MailTools
Package: libmaxminddb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmaxminddb
Version: 1.5.2-1build2
Depends: libc6 (>= 2.33)
Suggests: mmdb-bin
Description: IP geolocation database library
The libmaxminddb library provides a C library for reading MaxMind DB files,
including the GeoIP2 databases from MaxMind. This is a custom binary format
designed to facilitate fast lookups of IP addresses while allowing for great
flexibility in the type of data associated with an address.
.
The MaxMind DB format is an open format. The spec is available at
http://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative
Commons Attribution-ShareAlike 3.0 Unported License.
Homepage: https://maxmind.github.io/libmaxminddb/
Original-Maintainer: Faidon Liambotis <paravoid@debian.org>
Package: libmbim-glib4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 684
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmbim
Version: 1.28.0-1~ubuntu20.04.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.56)
Description: Support library to use the MBIM protocol
libmbim is a glib-based library for talking to WWAN modems and devices
which speak the Mobile Interface Broadband Model (MBIM) protocol.
Homepage: https://www.freedesktop.org/wiki/Software/libmbim/
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: libmbim-proxy
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libmbim
Version: 1.28.0-1~ubuntu20.04.1
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.56), libmbim-glib4 (= 1.28.0-1~ubuntu20.04.1)
Description: Proxy to communicate with MBIM ports
libmbim is a glib-based library for talking to WWAN modems and devices
which speak the Mobile Interface Broadband Model (MBIM) protocol.
.
This package contains the binary mbim-proxy used by libmbim to allow multiple
clients to use the same MBIM port simultaneously.
Homepage: https://www.freedesktop.org/wiki/Software/libmbim/
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: libmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmd
Version: 1.0.4-1build1
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
The libmd library provides various message digest ("hash") functions,
as found on various BSDs on a library with the same name and with a
compatible API.
Homepage: https://www.hadrons.org/software/libmd/
Original-Maintainer: Guillem Jover <guillem@debian.org>
Package: libmecab2
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 858
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mecab
Version: 0.996-14build9
Config-Version: 0.996-14build9
Replaces: libmecab1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Breaks: libmecab1
Conflicts: libmecab1
Conffiles:
/etc/mecabrc 725f8b0baaf5e2de88d057c9bb17c8f3
Description: Libraries of Mecab
This package provides runtime libraries of Mecab, that is a Japanese
morphological analysis system.
Original-Maintainer: Natural Language Processing (Japanese) <team+pkg-nlp-ja@tracker.debian.org>
Homepage: https://taku910.github.io/mecab/
Package: libmm-glib0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1259
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: modemmanager
Version: 1.20.0-1~ubuntu22.04.2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.61.2)
Recommends: modemmanager (>= 1.20.0-1~ubuntu22.04.2)
Description: D-Bus service for managing modems - shared libraries
ModemManager is a DBus-activated daemon which controls mobile broadband
(2G/3G/4G/5G) devices and connections. Whether built-in devices, USB dongles,
Bluetooth-paired telephones or professional RS232/USB devices with external
power supplies, ModemManager is able to prepare and configure the modems and
setup connections with them.
.
This package contains shared libraries for applications interfacing with
ModemManager.
Homepage: https://www.freedesktop.org/wiki/Software/ModemManager/
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-3build2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
libmnl is a minimalistic user-space library oriented to Netlink developers.
There are a lot of common tasks in parsing, validating, constructing of
both the Netlink header and TLVs that are repetitive and easy to get wrong.
This library aims to provide simple helpers that allows you to re-use code
and to avoid re-inventing the wheel.
.
The main features of this library are:
.
Small: the shared library requires around 30KB for an x86-based computer.
.
Simple: this library avoids complexity and elaborated abstractions that
tend to hide Netlink details.
.
Easy to use: the library simplifies the work for Netlink-wise developers.
It provides functions to make socket handling, message building,
validating, parsing and sequence tracking, easier.
.
Easy to re-use: you can use the library to build your own abstraction
layer on top of this library.
.
Decoupling: the interdependency of the main bricks that compose the
library is reduced, i.e. the library provides many helpers, but the
programmer is not forced to use them.
.
This package contains the shared libraries needed to run programs that use
the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libmodule-find-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.15-1
Depends: perl
Description: module to find and use installed Perl modules
Module::Find is a Perl module that allows developers to find and use modules
in categories. This is useful for auto-detecting driver or plugin modules.
You can differentiate between looking in the category itself or in all
subcategories.
.
If you want Module::Find to search in a certain directory (like the plugins
directory of your software installation), make sure you modify @INC before
you call the Module::Find functions.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Module-List
Package: libmodule-scandeps-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.31-1
Depends: perl:any
Description: module to recursively scan Perl code for dependencies
Module::ScanDeps is a Perl module that scans potential modules used by perl
programs to determine information about modules they depend on. It performs
static analysis as well as more aggressive scanning (by running files in
compile-only or normal mode).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Module-ScanDeps
Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
This device mounting library is used by mount and umount helpers.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: libmpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpclib3
Version: 1.2.1-2build1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg), libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
MPC is a portable library written in C for arbitrary precision
arithmetic on complex numbers providing correct rounding. For the time
being, it contains all arithmetic operations over complex numbers, the
exponential and the logarithm functions, the trigonometric and
hyperbolic functions.
.
Ultimately, it should implement a multiprecision equivalent of the ISO
C99 standard.
.
It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libmpdec3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.5.1-2build2
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Breaks: libpython3.8-stdlib (<< 2.8.5-2)
Description: library for decimal floating point arithmetic (runtime library)
mpdecimal is a package for correctly-rounded arbitrary precision decimal
floating point arithmetic.
Homepage: https://www.bytereef.org/mpdecimal/index.html
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3405
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.1.0-3build3
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg)
Breaks: libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~)
Description: multiple precision floating-point computation
MPFR provides a library for multiple-precision floating-point computation
with correct rounding. The computation is both efficient and has a
well-defined semantics. It copies the good ideas from the
ANSI/IEEE-754 standard for double-precision floating-point arithmetic
(53-bit mantissa).
Homepage: https://www.mpfr.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libmspack0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.10.1-2build2
Depends: libc6 (>= 2.14)
Description: library for Microsoft compression formats (shared library)
The purpose of libmspack is to provide both compression and decompression of
some loosely related file formats used by Microsoft. The intention is to
support all of the following formats: COMPRESS.EXE [SZDD],
Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/
Original-Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 318
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo5 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (legacy version)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the legacy shared libraries necessary to run
programs compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libncurses6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 329
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo6 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libncursesw5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo5 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character legacy version)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the legacy shared libraries necessary to run
programs compiled with ncursesw, which includes support for wide
characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libncursesw6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo6 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libnet-dbus-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 622
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.2.0-1build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libxml-twig-perl
Description: Perl extension for the DBus bindings
Net::DBus provides a Perl API for the DBus message system. The DBus Perl
interface is currently operating against the 0.32 development version of
DBus, but should work with later versions too, providing the API changes have
not been too drastic.
.
Users of this package are either typically, service providers in which case
the Net::DBus::Service and Net::DBus::Object modules are of most relevance,
or are client consumers, in which case Net::DBus::RemoteService and
Net::DBus::RemoteObject are of most relevance.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-DBus
Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.22-1
Depends: perl:any, libio-socket-ip-perl, liburi-perl
Recommends: libio-socket-ssl-perl
Description: module providing low-level HTTP connection client
The Net::HTTP class is a low-level HTTP client. An instance of the
Net::HTTP class represents a connection to an HTTP server. The
HTTP protocol is described in RFC 2616. The Net::HTTP class
supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
You can mix its methods with reading and writing from the socket directly.
This is not necessarily a good idea, unless you know what you are doing.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-HTTP
Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.04-1
Depends: libio-socket-ssl-perl, perl
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
for its network operations. Due to the nature of Net::SMTP's new method, it is
not overridden to make use of a default port for the SMTPS service. Perhaps
future versions will be smart like that. Port 465 is usually what you want,
and it's not a pain to specify that.
.
This package is deprecated. Net::SMTP (in perl core) has support for SMTP
over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-SMTP-SSL
Package: libnet-snmp-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 423
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.0.1-6
Depends: perl:any
Suggests: libcrypt-des-perl, libdigest-hmac-perl, libio-socket-inet6-perl
Description: Script SNMP connections
The module Net::SNMP implements an object oriented interface to
the Simple Network Management Protocol. Perl applications can
use the module to retrieve or update information on a remote
host using the SNMP protocol. Net::SNMP is implemented completely
in Perl, requires no compiling, and uses only standard Perl
modules. SNMPv1 and SNMPv2c (Community-Based SNMPv2), as well as
SNMPv3 with USM are supported by the module. SNMP over UDP as well
as TCP with both IPv4 and IPv6 can be used. The Net::SNMP module
assumes that the user has a basic understanding of the Simple
Network Management Protocol and related network management concepts.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-SNMP
Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.92-1build2
Depends: perl, perl-openssl-abi-3, perlapi-5.34.0, libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Description: Perl module for Secure Sockets Layer (SSL)
Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
(SSL) functions of the SSLeay library directly from your perl scripts. It
is useful if you want to program robots that access secure web servers or
if you want to build your own applications over SSL encrypted tunnels. If
you just want to view web pages on https servers, you do not need this -
your web browser already knows to do that.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-SSLeay
Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.9-1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
libnetfilter_conntrack is a userspace library providing a programming
interface (API) to the in-kernel connection tracking state table.
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/
Package: libnetplan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 323
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 0.106.1-7ubuntu0.22.04.2
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.70.0), libuuid1 (>= 2.16), libyaml-0-2
Description: YAML network configuration abstraction runtime library
netplan reads YAML network configuration files which are written
by administrators, installers, cloud image instantiations, or other OS
deployments. During early boot it then generates backend specific
configuration files in /run to hand off control of devices to a particular
networking daemon.
.
Currently supported backends are networkd and NetworkManager.
.
This package contains the necessary runtime library files.
Homepage: https://netplan.io/
Original-Maintainer: Debian Netplan Maintainers <team+netplan@tracker.debian.org>
Package: libnettle8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.7.3-1build2
Depends: libc6 (>= 2.17)
Description: low level cryptographic library (symmetric and one-way cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the symmetric and one-way cryptographic
algorithms. To avoid having this package depend on libgmp, the
asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.21-5ubuntu2
Depends: libc6 (>= 2.34), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
/etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
/etc/newt/palette.ubuntu ac72ec93d29d94ad06bb3180f16cefb1
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
Newt is a windowing toolkit for text mode built from the slang library.
It allows color text mode applications to easily use stackable windows,
push buttons, check boxes, radio buttons, lists, entry fields, labels,
and displayable text. Scrollbars are supported, and forms may be nested
to provide extra functionality. This package contains the shared library
for programs that have been built with newt.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3build3
Depends: libc6 (>= 2.14)
Description: Netfilter netlink library
libnfnetlink is the low-level library for netfilter related
kernel/userspace communication. It provides a generic messaging
infrastructure for in-kernel netfilter subsystems (such as
nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
respective users and/or management tools in userspace.
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Package: libnfsidmap1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nfs-utils
Version: 1:2.6.1-1ubuntu1.2
Replaces: libnfsidmap2 (<< 0.25-7~)
Depends: libc6 (>= 2.34), libldap-2.5-0 (>= 2.5.4)
Breaks: libnfsidmap2 (<< 0.25-7~)
Conflicts: libnfsidmap2
Description: NFS idmapping library
libnfsidmap provides functions to map between NFSv4 names (which are
of the form user@domain) and local uid's and gid's.
Homepage: https://linux-nfs.org/
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 913
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.0.2-1ubuntu3
Depends: libc6 (>= 2.33), libgmp10 (>= 2:6.2.1+dfsg), libjansson4 (>= 2.3), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.1), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
This library provides high level semantics to interact with the nftables
framework by Netfilter project.
.
nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
.
Netfilter software and nftables in particular are used in applications such
as Internet connection sharing, firewalls, IP accounting, transparent
proxying, advanced routing and traffic control.
.
A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
.
This package contains the libnftables library.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.1-1build1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
libnftnl is the low-level library for Netfilter 4th generation
framework nftables.
.
Is the user-space library for low-level interaction with
nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 203
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.43.0-1ubuntu0.1
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs a shared library.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>
Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libc6 (>= 2.34)
Conffiles:
/etc/libnl-3/classid 3e07259e58674631830b152e983ca995
/etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
This is a library for applications dealing with netlink sockets.
The library provides an interface for raw netlink messaging and various
netlink family specific interfaces.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/
Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libnl-3-200 (= 3.5.0-0.1), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
This is a library for applications dealing with netlink sockets.
The library provides an interface for raw netlink messaging and various
netlink family specific interfaces.
.
API to the generic netlink protocol, an extended version of the netlink
protocol.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/
Package: libnode72
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40241
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nodejs
Version: 12.22.9~dfsg-1ubuntu3.6
Depends: libbrotli1 (>= 1.0.0), libc-ares2 (>= 1.11.0~rc1), libc6 (>= 2.34), libgcc-s1 (>= 3.4), libicu70 (>= 70.1-1~), libnghttp2-14 (>= 1.41.0), libstdc++6 (>= 11), libuv1 (>= 1.39.0), zlib1g (>= 1:1.1.4)
Breaks: libnode64
Description: evented I/O for V8 javascript - runtime library
Node.js is a platform built on Chrome's JavaScript runtime for easily
building fast, scalable network applications. Node.js uses an
event-driven, non-blocking I/O model that makes it lightweight and
efficient, perfect for data-intensive real-time applications that run
across distributed devices.
.
Node.js is bundled with several useful libraries to handle server
tasks:
.
System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
.
This package provides the dynamic library for Node.js.
Homepage: https://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@alioth-lists.debian.net>
Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.6-3build2
Depends: libc6 (>= 2.34)
Description: replacement for GNU Pth using system threads
nPth is a non-preemptive threads implementation using an API very
similar to the one known from GNU Pth. It has been designed as a
replacement of GNU Pth for non-ancient operating systems. In
contrast to GNU Pth it is based on the system's standard threads
implementation. Thus nPth allows the use of libraries which are not
compatible to GNU Pth.
Homepage: https://www.gnupg.org/
Original-Maintainer: Eric Dorland <eric@debian.org>
Package: libnsl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2build2
Replaces: libc6-dev (<< 2.31-4)
Depends: libnsl2 (= 1.3.0-2build2), libtirpc-dev
Breaks: libc6-dev (<< 2.31-4)
Description: libnsl development files
This package contains the files needed for developing applications that
use libnsl.
Homepage: https://github.com/thkukuk/libnsl
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2build2
Depends: libc6 (>= 2.33), libtirpc3 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
This package contains the libnsl library, which contains the public client
interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nspr
Version: 2:4.35-0ubuntu0.22.04.1
Depends: libc6 (>= 2.34)
Description: NetScape Portable Runtime Library
This library provides platform independent non-GUI operating system
facilities including:
* threads,
* thread synchronisation,
* normal file I/O and network I/O,
* interval timing and calendar time,
* basic memory management (malloc and free),
* shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>
Package: libnss-nis
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.1-0ubuntu6
Replaces: libc6 (<< 2.32)
Depends: libc6 (>= 2.14), libnsl2 (>= 1.0)
Breaks: libc6 (<< 2.32)
Description: NSS module for using NIS as a naming service
This package provides a Name Service Switch that allows your NIS server
act as a name service. This means providing user account information,
group id's, host information, aliases, netgroups, and basically anything
else that you would normally get from /etc flat files.
.
This module was formerly part of glibc, but is now standalone to be able
to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnss_nis
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: libnss-nisplus
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.3-0ubuntu6
Replaces: libc6 (<< 2.32)
Depends: libc6 (>= 2.14), libnsl2 (>> 1.3.0), libnsl2 (<< 1.3.1), libtirpc3 (>= 1.0.2)
Breaks: libc6 (<< 2.32)
Description: NSS module for using NIS+ as a naming service
This package provides a Name Service Switch that allows your NIS+ server
act as a name service. This means providing user account information,
group id's, host information, aliases, netgroups, and basically anything
else that you would normally get from /etc flat files.
.
This module was formerly part of glibc, but is now standalone to be able
to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnss_nisplus
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: libnss-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 490
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.11
Depends: libc6 (>= 2.34), systemd (= 249.11-0ubuntu3.11)
Description: nss module providing dynamic user and group name resolution
nss-systemd is a plug-in module for the GNU Name Service Switch (NSS)
functionality of the GNU C Library (glibc), providing UNIX user and group name
resolution for dynamic users and groups allocated through the DynamicUser=
option in systemd unit files. See systemd.exec(5) for details on this
option.
.
Installing this package automatically adds the module to /etc/nsswitch.conf.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4007
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.98-0ubuntu0.22.04.2
Depends: libc6 (>= 2.34), libnspr4 (>= 2:4.34), libsqlite3-0 (>= 3.5.9)
Conflicts: libnss3-1d (<< 2:3.13.4-2)
Description: Network Security Service libraries
This is a set of libraries designed to support cross-platform development
of security-enabled client and server applications. It can support SSLv2
and v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
other security standards.
Homepage: http://www.mozilla.org/projects/security/pki/nss/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>
Package: libntfs-3g89
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 371
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ntfs-3g
Version: 1:2021.8.22-3ubuntu1.2
Depends: libc6 (>= 2.33)
Description: read/write NTFS driver for FUSE (runtime library)
NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
filesystem used by Microsoft Windows.
.
This package contains the actual library.
Homepage: https://github.com/tuxera/ntfs-3g/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.14-3ubuntu2
Depends: libc6 (>= 2.33)
Description: Libraries for controlling NUMA policy
Library to control specific NUMA (Non-Uniform Memory Architecture)
scheduling or memory placement policies.
Homepage: https://github.com/numactl/numactl
Original-Maintainer: Ian Wienand <ianw@debian.org>
Package: libonig5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 615
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libonig
Version: 6.9.7.1-2build1
Depends: libc6 (>= 2.14)
Description: regular expressions library
Oniguruma is a library for working with regular expressions.
.
Different character encoding for every regular expression object can
be specified.
Homepage: https://github.com/kkos/oniguruma
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Package: libopeniscsiusr
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: open-iscsi
Version: 2.1.5-1ubuntu1
Replaces: libopeniscsiusr0.2.0 (<< 2.1.4-0ubuntu1~)
Depends: libc6 (>= 2.33), libkmod2 (>= 5~)
Breaks: libopeniscsiusr0.2.0 (<< 2.1.4-0ubuntu1~)
Enhances: open-iscsi
Description: iSCSI userspace library
The Open-iSCSI project is a high-performance, transport independent,
multi-platform implementation of RFC3720 iSCSI.
.
Open-iSCSI is partitioned into user and kernel parts.
.
The kernel portion of Open-iSCSI is a from-scratch code
licensed under GPL. The kernel part implements iSCSI data path
(that is, iSCSI Read and iSCSI Write), and consists of three
loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.
.
User space contains the entire control plane: configuration
manager, iSCSI Discovery, Login and Logout processing,
connection-level error processing, Nop-In and Nop-Out handling,
and (in the future:) Text processing, iSNS, SLP, Radius, etc.
.
The user space Open-iSCSI consists of a daemon process called
iscsid, and a management utility iscsiadm.
.
This package contains the iSCSI userspace library.
Homepage: https://www.open-iscsi.com/
Original-Maintainer: Debian iSCSI Maintainers <open-iscsi@packages.debian.org>
Package: libp11-kit0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.24.0-6build1
Depends: libc6 (>= 2.34), libffi8 (>= 3.4)
Breaks: opencryptoki (<= 3.6.1+dfsg-1)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
The p11-kit library provides a way to load and enumerate Public-Key
Cryptography Standard #11 modules, along with a standard configuration
setup for installing PKCS#11 modules so that they're discoverable. It
also solves problems with coordinating the use of PKCS#11 by different
components or libraries living in the same process.
.
This package contains the shared library required for applications loading
and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libpackagekit-glib2-18
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 463
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: packagekit
Version: 1.2.5-2ubuntu2
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.54)
Recommends: packagekit (= 1.2.5-2ubuntu2)
Description: Library for accessing PackageKit using GLib
PackageKit allows performing simple software management tasks over a DBus
interface e.g. refreshing the cache, updating, installing and removing
software packages or searching for multimedia codecs and file handlers.
.
This package provides an advanced library to access PackageKit using GLib.
It makes use of only async D-Bus calls and provides high level tasks which
peform the "transaction dance".
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.4.0-11ubuntu2.3
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libdb5.3, libnsl2 (>= 1.0), libpam0g (>= 1.3.2), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.4.0-11ubuntu2.3)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
/etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae
/etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
/etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
/etc/security/limits.conf 38dce56af34daf316b901d465769a137
/etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
/etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
/etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
/etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
/etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
This package completes the set of modules for PAM. It includes the
pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.4.0-11ubuntu2.3
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~)
Description: Pluggable Authentication Modules for PAM - helper binaries
This package contains helper binaries used by the standard set of PAM
modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.4.0-11ubuntu2.3
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
/etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
/etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
Contains configuration files and directories required for
authentication to work on Debian systems. This package is required
on almost all installations.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 648
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.11
Provides: default-logind (= 249.11-0ubuntu3.11), logind (= 249.11-0ubuntu3.11)
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libpam0g (>= 0.99.7.1), systemd (= 249.11-0ubuntu3.11), libpam-runtime (>= 1.0.1-6), default-dbus-system-bus | dbus-system-bus, systemd-sysv
Description: system and service manager - PAM module
This package contains the PAM module which registers user sessions in
the systemd control group hierarchy for logind.
.
If in doubt, do install this package.
.
Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.4.0-11ubuntu2.3
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
Contains the shared library for Linux-PAM, a library that enables the
local system administrator to choose how applications authenticate users.
In other words, without rewriting or recompiling a PAM-aware application,
it is possible to switch between the authentication mechanism(s) it uses.
One may entirely upgrade the local authentication system without touching
the applications themselves.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 563
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: fontconfig (>= 2.13.0), libc6 (>= 2.14), libfribidi0 (>= 1.0.6), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 2.6.0), libthai0 (>= 0.1.25)
Breaks: libpangocairo-1.0-0 (<< 1.44.7), libpangoft2-1.0-0 (<< 1.44.7), libpangoxft-1.0-0 (<< 1.44.7)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libpango1.0-0
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libpango-1.0-0 (>= 1.42), libpangocairo-1.0-0 (>= 1.42), libpangoft2-1.0-0 (>= 1.42), libpangoxft-1.0-0 (>= 1.42)
Suggests: libpangox-1.0-0 (>= 0.0.2-2~)
Description: Layout and rendering of internationalized text (transitional package)
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This is a transitional package and will be removed in a future release.
Third-party packages should depend on the individual libraries that they
use instead. If another package depends on this one, please report that
as a bug.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.13.0), libglib2.0-0 (>= 2.62.0), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.6+ds-2ubuntu1), libpangoft2-1.0-0 (= 1.50.6+ds-2ubuntu1)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.6+ds-2ubuntu1)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libpangoxft-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.13.0), libglib2.0-0 (>= 2.62.0), libpango-1.0-0 (= 1.50.6+ds-2ubuntu1), libpangoft2-1.0-0 (= 1.50.6+ds-2ubuntu1), libx11-6, libxft2 (>> 2.1.1), libxrender1
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libparted-fs-resize0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.4-2build1
Depends: libc6 (>= 2.14), libparted2 (= 3.4-2build1)
Suggests: libparted-dev
Description: disk partition manipulator - shared FS resizing library
GNU Parted is a program that allows you to create, destroy, resize,
move, and copy disk partitions. This is useful for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
.
This package contains the libparted-fs-resize shared library for
resizing HFS+ and FAT file systems.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Package: libparted2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 458
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.4-2build1
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16), dmidecode
Suggests: parted, libparted-dev, libparted-i18n (= 3.4-2build1)
Description: disk partition manipulator - shared library
GNU Parted is a program that allows you to create, destroy, resize,
move, and copy disk partitions. This is useful for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
.
This package contains the shared library.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 357
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.10.1-4build1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.33), libdbus-1-3 (>= 1.9.14)
Description: system interface for user-level packet capture
libpcap (Packet CAPture) provides a portable framework for low-level
network monitoring. Applications include network statistics collection,
security monitoring, network debugging, etc.
.
Since almost every system vendor provides a different interface for
packet capture, and since there are several tools that require this
functionality, the libpcap authors created this system-independent API
to ease in porting and to alleviate the need for several
system-dependent packet capture modules in each application.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.7.0-6
Depends: libc6 (>= 2.34), libudev1 (>= 196), zlib1g (>= 1:1.1.4), pci.ids (>= 0.0~2019.11.10-2)
Description: PCI utilities (shared library)
This package contains the libpci shared library files.
.
The libpci library provides portable access to configuration
registers of devices connected to the PCI bus.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://mj.ucw.cz/sw/pciutils/
Package: libpciaccess0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpciaccess
Version: 0.16-3
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4)
Suggests: pciutils
Description: Generic PCI access library for X
Provides functionality for X to access the PCI bus and devices
in a platform-independent way.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libpcre2-8-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 621
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.39-3ubuntu0.1
Depends: libc6 (>= 2.14)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
This is PCRE2, the new implementation of PCRE, a library of functions
to support regular expressions whose syntax and semantics are as
close as possible to those of the Perl 5 language. New projects
should use this library in preference to the older library,
confusingly called pcre3 in Debian.
.
This package contains the 8 bit runtime library, which operates on
ASCII and UTF-8 input.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <matthew@debian.org>
Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 683
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-13ubuntu0.22.04.1
Depends: libc6 (>= 2.14)
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
New packages should use the newer pcre2 packages, and existing
packages should migrate to pcre2.
.
This package contains the runtime libraries.
Original-Maintainer: Matthew Vernon <matthew@debian.org>
Package: libperl5.22
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 20359
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.22.1-9ubuntu0.9
Config-Version: 5.22.1-9ubuntu0.9
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.068), libcompress-raw-zlib-perl (<< 2.068), libcompress-zlib-perl (<< 2.068), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95), libencode-perl (<< 2.77), libio-compress-base-perl (<< 2.068), libio-compress-bzip2-perl (<< 2.068), libio-compress-perl (<< 2.068), libio-compress-zlib-perl (<< 2.068), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.53.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 2.01), libthreads-shared-perl (<< 1.48), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.29), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3), perl-modules-5.22 (>= 5.22.1-9ubuntu0.9)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.068), libcompress-raw-zlib-perl (<< 2.068), libcompress-zlib-perl (<< 2.068), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95), libencode-perl (<< 2.77), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.068), libio-compress-bzip2-perl (<< 2.068), libio-compress-perl (<< 2.068), libio-compress-zlib-perl (<< 2.068), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.53.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 2.01), libthreads-shared-perl (<< 1.48), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.29), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
This package contains the shared Perl library, used by applications
which embed a Perl interpreter.
.
It also contains the architecture-dependent parts of the standard
library (and depends on perl-modules-5.22 which contains the
architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libperl5.34
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28445
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.34.0-3ubuntu1.3
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.101), libcompress-raw-zlib-perl (<< 2.101), libcompress-zlib-perl (<< 2.102), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.08), libio-compress-base-perl (<< 2.102), libio-compress-bzip2-perl (<< 2.102), libio-compress-perl (<< 2.102), libio-compress-zlib-perl (<< 2.102), libmime-base64-perl (<< 3.16), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.23), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.26), libthreads-shared-perl (<< 1.62), libtime-hires-perl (<< 1.9767), libtime-piece-perl (<< 1.3401), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.18-3), zlib1g (>= 1:1.2.2.3), perl-modules-5.34 (>= 5.34.0-3ubuntu1.3)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.101), libcompress-raw-zlib-perl (<< 2.101), libcompress-zlib-perl (<< 2.102), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.08), libfilter-perl (<< 1.60), libio-compress-base-perl (<< 2.102), libio-compress-bzip2-perl (<< 2.102), libio-compress-perl (<< 2.102), libio-compress-zlib-perl (<< 2.102), libmime-base64-perl (<< 3.16), libstorable-perl (<< 3.23), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.26), libthreads-shared-perl (<< 1.62), libtime-hires-perl (<< 1.9767), libtime-piece-perl (<< 1.3401)
Description: shared Perl library
This package contains the shared Perl library, used by applications
which embed a Perl interpreter.
.
It also contains the architecture-dependent parts of the standard
library (and depends on perl-modules-5.34 which contains the
architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libphobos2-ldc-shared98
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6241
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ldc
Version: 1:1.28.0-1ubuntu1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2), libllvm11 (>= 1:9~svn298832-1~), libstdc++6 (>= 11), zlib1g (>= 1:1.2.0)
Conflicts: libphobos2-ldc-shared94
Description: LLVM D Compiler - Standard and runtime libraries
LDC is a portable compiler for the D programming language with modern
optimization and code generation capabilities.
It is based on the latest DMD frontend and uses LLVM as backend.
.
This package contains the Phobos D standard library, D runtime library
and LDC JIT library.
Homepage: https://github.com/ldc-developers/ldc
Original-Maintainer: Debian D Language Group <team+d-team@tracker.debian.org>
Package: libpipeline1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.5-1
Depends: libc6 (>= 2.26)
Description: Unix process pipeline manipulation library
This is a C library for setting up and running pipelines of processes,
without needing to involve shell command-line parsing which is often
error-prone and insecure.
Homepage: https://nongnu.org/libpipeline/
Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.40.0-1ubuntu0.22.04.1
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
A library for manipulating pixel regions -- a set of Y-X banded
rectangles, image compositing using the Porter/Duff model
and implicit mask generation for geometric primitives including
trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libplymouth5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: plymouth
Version: 0.9.5+git20211018-1ubuntu3
Replaces: plymouth (<< 0.9.2-1~)
Depends: libc6 (>= 2.34), libpng16-16 (>= 1.6.2-1), libudev1 (>= 183)
Breaks: plymouth (<< 0.9.2-1~)
Description: graphical boot animation and logger - shared libraries
Plymouth is an application that runs very early in the boot process
(even before the root filesystem is mounted!) that provides a graphical
boot animation while the boot process happens in the background.
.
This package contains the shared libraries.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 353
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.37-3build5
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.11)
Description: PNG library - runtime (version 1.6)
libpng is a library implementing an interface for reading and writing
PNG (Portable Network Graphics) format files.
.
This package contains the runtime library files needed to run software
using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-33
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-33)
Description: PolicyKit Authentication Agent API
PolicyKit is a toolkit for defining and handling the policy that
allows unprivileged processes to speak to privileged processes.
.
This package contains a library for accessing the authentication agent.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-33
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213)
Description: PolicyKit Authorization API
PolicyKit is a toolkit for defining and handling the policy that
allows unprivileged processes to speak to privileged processes.
.
This package contains a library for accessing PolicyKit.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.18-3build1
Depends: libc6 (>= 2.33)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt
Original-Maintainer: Michael Jeanson <mjeanson@debian.org>
Package: libpq-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: postgresql-14
Version: 14.15-0ubuntu0.22.04.1
Depends: libpq5 (= 14.15-0ubuntu0.22.04.1), libssl-dev
Suggests: postgresql-doc-14
Description: header files for libpq5 (PostgreSQL library)
Header files and static library for compiling C programs to link
with the libpq library in order to communicate with a PostgreSQL
database backend.
.
PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: libpq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: postgresql-14
Version: 14.15-0ubuntu0.22.04.1
Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libldap-2.5-0 (>= 2.5.4), libssl3 (>= 3.0.0~~alpha1)
Description: PostgreSQL C client library
libpq is a C library that enables user programs to communicate with
the PostgreSQL database server. The server can be on another machine
and accessed through TCP/IP. This version of libpq is compatible
with servers from PostgreSQL 8.2 or later.
.
This package contains the run-time library, needed by packages using
libpq.
.
PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: libproc-processtable-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 0.634-1build1
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Description: Perl library for accessing process table information
Proc::ProcessTable attempts to unify the interfaces to Unix process table
information, without having to run a ps subprocess from within a perl or
shell script and parse the output.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Proc-ProcessTable
Package: libprocps8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.17-6ubuntu2.1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.34), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
The libprocps library is a way of accessing information out of the /proc
filesystem.
.
This package contains the shared libraries necessary to run programs
compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.21.0-1.2build2
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring2 (>= 0.9.7)
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
Libpsl allows checking domains against the Public Suffix List.
It can be used to avoid privacy-leaking 'super-cookies',
'super domain' certificates, for domain highlighting purposes
sorting domain lists by site and more.
.
Please see https://publicsuffix.org for more detailed information.
.
This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl
Original-Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Package: libpython2.7-minimal
Status: deinstall ok config-files
Priority: optional
Section: python
Installed-Size: 2784
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.18-13ubuntu1.1
Config-Version: 2.7.18-13ubuntu1.1
Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10)
Recommends: libpython2.7-stdlib
Breaks: python2.7-minimal (<< 2.7.4~rc1-1~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python2.7-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.10.6-1~22.04
Replaces: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Depends: libpython3.10-dev (>= 3.10.6-1~)
Breaks: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Description: header files and a static library for Python (default)
Header files, a static library and development tools for building
Python modules, extending the Python interpreter or embedding Python
in applications.
.
This package is a dependency package, which depends on Debian's default
Python 3 version's headers (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/
Package: libpython3-stdlib
Status: install ok installed
Priority: important
Section: python
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.10.6-1~22.04
Depends: libpython3.10-stdlib (>= 3.10.6-1~)
Description: interactive high-level object-oriented language (default python3 version)
This package contains the majority of the standard library for the Python
language (default python3 version).
.
This package is a dependency package, which depends on Debian's default
Python 3 version's standard library (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/
Package: libpython3.10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5768
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: libpython3.10-stdlib (= 3.10.12-1~22.04.3), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 3.10)
Python is a high-level, interactive, object-oriented language. Its 3.10 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the shared runtime library, normally not needed
for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3.10-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 20415
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: libpython3.10-stdlib (= 3.10.12-1~22.04.3), libpython3.10 (= 3.10.12-1~22.04.3), libexpat1-dev, zlib1g-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.10)
Header files, a static library and development tools for building
Python (v3.10) modules, extending the Python interpreter or embedding
Python (v3.10) in applications.
.
Maintainers of Python packages should read README.maintainers.
.
This package contains development files. It is normally not
used on it's own, but as a dependency of python3.10-dev.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3.10-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Recommends: libpython3.10-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.10/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.10)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.10-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3.10-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8119
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.3
Replaces: python3-gdbm (<< 3.9.9-1~)
Depends: libpython3.10-minimal (= 3.10.12-1~22.04.3), media-types | mime-support, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libmpdec3, libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.14.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Breaks: python3-gdbm (<< 3.9.9-1~)
Description: Interactive high-level object-oriented language (standard library, version 3.10)
Python is a high-level, interactive, object-oriented language. Its 3.10 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 3.10's standard library. It is normally not
used on its own, but as a dependency of python3.10.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3.12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8905
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: libpython3.12-stdlib (= 3.12.7-1+jammy1), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 3.12)
Python is a high-level, interactive, object-oriented language. Its 3.12 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the shared runtime library, normally not needed
for programs using the statically linked interpreter.
Package: libpython3.12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 28146
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: libpython3.12-stdlib (= 3.12.7-1+jammy1), libpython3.12 (= 3.12.7-1+jammy1), libexpat1-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.12)
Header files, a static library and development tools for building
Python (v3.12) modules, extending the Python interpreter or embedding
Python (v3.12) in applications.
.
Maintainers of Python packages should read README.maintainers.
.
This package contains development files. It is normally not
used on it's own, but as a dependency of python3.12-dev.
Package: libpython3.12-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5214
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: libc6 (>= 2.4), libssl3 (>= 3.0.0~~alpha1)
Recommends: libpython3.12-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.12/sitecustomize.py d41d8cd98f00b204e9800998ecf8427e
Description: Minimal subset of the Python language (version 3.12)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.12-minimal.
Package: libpython3.12-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8896
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: libpython3.12-minimal (= 3.12.7-1+jammy1), mime-support, tzdata, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Recommends: ca-certificates
Description: Interactive high-level object-oriented language (standard library, version 3.12)
Python is a high-level, interactive, object-oriented language. Its 3.12 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 3.12's standard library. It is normally not
used on its own, but as a dependency of python3.12.
Package: libpython3.5-minimal
Status: deinstall ok config-files
Priority: important
Section: python
Installed-Size: 3757
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.2-2ubuntu0~16.04.13
Config-Version: 3.5.2-2ubuntu0~16.04.13
Depends: libc6 (>= 2.14), libssl1.0.0 (>= 1.0.2~beta3)
Recommends: libpython3.5-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.5/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.5)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.5-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libpython3.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5309
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libpython3.8-stdlib (= 3.8.19-1+jammy1), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 3.8)
Python is a high-level, interactive, object-oriented language. Its 3.8 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the shared runtime library, normally not needed
for programs using the statically linked interpreter.
Package: libpython3.8-dbg
Status: install ok installed
Priority: optional
Section: debug
Installed-Size: 80010
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libpython3.8-stdlib (= 3.8.19-1+jammy1), libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libexpat1 (>= 2.1~beta3), libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.7.15), libssl3 (>= 3.0.0~~alpha1), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1), zlib1g (>= 1:1.2.0)
Description: Debug Build of the Python Interpreter (version 3.8)
The package holds two things:
.
- Extensions for a Python interpreter configured with --pydebug.
- Debug information for standard python extensions.
.
See the README.debug for more information.
Package: libpython3.8-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18646
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libpython3.8-stdlib (= 3.8.19-1+jammy1), libpython3.8 (= 3.8.19-1+jammy1), libexpat1-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.8)
Header files, a static library and development tools for building
Python (v3.8) modules, extending the Python interpreter or embedding
Python (v3.8) in applications.
.
Maintainers of Python packages should read README.maintainers.
.
This package contains development files. It is normally not
used on it's own, but as a dependency of python3.8-dev.
Package: libpython3.8-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 4825
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libc6 (>= 2.4), libssl3 (>= 3.0.0~~alpha1)
Recommends: libpython3.8-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.8/sitecustomize.py d41d8cd98f00b204e9800998ecf8427e
Description: Minimal subset of the Python language (version 3.8)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.8-minimal.
Package: libpython3.8-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 7897
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libpython3.8-minimal (= 3.8.19-1+jammy1), mime-support, tzdata, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.7.15), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Recommends: ca-certificates
Description: Interactive high-level object-oriented language (standard library, version 3.8)
Python is a high-level, interactive, object-oriented language. Its 3.8 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 3.8's standard library. It is normally not
used on its own, but as a dependency of python3.8.
Package: libqmi-glib5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libqmi
Version: 1.32.0-1ubuntu0.22.04.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.56), libmbim-glib4 (>= 1.27~), libmbim-proxy
Description: Support library to use the Qualcomm MSM Interface (QMI) protocol
Libraries for adding QMI support to applications that use glib.
Homepage: https://www.freedesktop.org/wiki/Software/libqmi
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: libqmi-proxy
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libqmi
Version: 1.32.0-1ubuntu0.22.04.1
Depends: libqmi-glib5 (= 1.32.0-1ubuntu0.22.04.1), libc6 (>= 2.34), libglib2.0-0 (>= 2.56)
Description: Proxy to communicate with QMI ports
This package contains the binary qmi-proxy used by libqmi to allow multiple
clients to use the same QMI port simultaneously.
Homepage: https://www.freedesktop.org/wiki/Software/libqmi
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.23)
Description: GCC Quad-Precision Math Library
A library, which provides quad-precision mathematical functions on targets
supporting the __float128 datatype. The library is used to provide on such
targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libradcli4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: radcli
Version: 1.2.11-1build1
Depends: libc6 (>= 2.22), libgnutls30 (>= 3.6.12), libnettle8
Conffiles:
/etc/radcli/dictionary 1898036428a32ce72858e312b20fc6fe
/etc/radcli/dictionary.ascend 3feea1d1e76f745c06c5a74e87620ad2
/etc/radcli/dictionary.compat dacdaa691ce8e0182dd62b5b8c16182e
/etc/radcli/dictionary.merit 88ac9472f94481602095184c5378c561
/etc/radcli/dictionary.microsoft d30a5a44053d31eb327e170074cbbe91
/etc/radcli/dictionary.roaringpenguin 1b4ca7a0274cb409874fd8b4a6a331f0
/etc/radcli/dictionary.sip 524a2482c12cba62280ef86ec78ac57d
/etc/radcli/radiusclient-tls.conf ff697fa4fcce7aff1830f3b6545c8245
/etc/radcli/radiusclient.conf dcaa58cda9598df2939bb8abfa4ebbfd
/etc/radcli/servers fba7563cf2e014146c7aa120e3f2a65b
/etc/radcli/servers-tls 5f9ba517eb3690e659ef8c9091ad16ee
Description: Enhanced RADIUS client library
radcli is an enhanced version of the freeradius-client, libradius1
and it's successor radiusclient-ng, the RADIUS client library.
radcli contains vastly improved API and many additional bug
fixes. The library is also more efficient than the original version.
Homepage: http://radcli.github.io/radcli/
Original-Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Package: libreadline8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 461
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.1.2-1
Depends: readline-common, libc6 (>= 2.33), libtinfo6 (>= 6)
Description: GNU readline and history libraries, run-time libraries
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10760
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.52.5+dfsg-3ubuntu0.2
Depends: libc6 (>= 2.34), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.12), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.31.1), libglib2.0-0 (>= 2.50.0), libpango-1.0-0 (>= 1.45.5), libpangocairo-1.0-0 (>= 1.44.0), libxml2 (>= 2.9.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package contains the runtime library, necessary to run
applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.52.5+dfsg-3ubuntu0.2
Depends: librsvg2-2 (= 2.52.5+dfsg-3ubuntu0.2), libgdk-pixbuf-2.0-0 (>= 2.23.5-2), libglib2.0-0 (>= 2.50.0)
Description: SAX-based renderer library for SVG files (extra runtime)
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package includes the gdk-pixbuf loader allowing
to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-2build4
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg), libgnutls30 (>= 3.7.2), libhogweed6, libnettle8, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
A small dumper for media content streamed over the RTMP protocol (like BBC's
iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
flv file, which can be played/transcoded with standard tools.
.
This package contains the shared libraries, header files needed by
programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27+dfsg2-3ubuntu1.2), libc6 (>= 2.34)
Recommends: libsasl2-modules (>= 2.1.27+dfsg2-3ubuntu1.2)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
This is the Cyrus SASL API implementation, version 2.1.
.
SASL is the Simple Authentication and Security Layer, a method for
adding authentication support to connection-based protocols. To use
SASL, a protocol includes a command for identifying and
authenticating a user to a server and for optionally negotiating
protection of subsequent protocol interactions. If its use is
negotiated, a security layer is inserted between the protocol and the
connection. See RFC 2222 for more information.
.
Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Replaces: libsasl2-modules-gssapi-mit (<< 2.1.27+dfsg2-3ubuntu1.2)
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: libsasl2-modules-gssapi-mit (<< 2.1.27+dfsg2-3ubuntu1.2), logcheck-database (<= 1.3.16~)
Conffiles:
/etc/logcheck/ignore.d.server/libsasl2-modules bef6e87d49dab9587a357eb525524bda
Description: Cyrus SASL - pluggable authentication modules
This is the Cyrus SASL API implementation, version 2.1. See package
libsasl2-2 and RFC 2222 for more information.
.
This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
NTLM, SCRAM, CRAM-MD5, and DIGEST-MD5 (with DES support, deprecated).
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
This is the Cyrus SASL API implementation, version 2.1. See package
libsasl2-2 and RFC 2222 for more information.
.
This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Package: libseccomp2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.5.3-2ubuntu2
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
This library provides a high level interface to constructing, analyzing
and installing seccomp filters via a BPF passed to the Linux Kernel's
prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <kees@debian.org>
Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.3-1build2
Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
This package provides the shared libraries for Security-enhanced
Linux that provides interfaces (e.g. library functions for the
SELinux kernel APIs like getcon(), other support functions like
getseuserbyname()) to SELinux-aware applications. Security-enhanced
Linux is a patch of the Linux kernel and a number of utilities with
enhanced security functionality designed to add mandatory access
controls to Linux. The Security-enhanced Linux kernel contains new
architectural components originally developed to improve the security
of the Flask operating system. These architectural components provide
general support for the enforcement of many kinds of mandatory access
control policies, including those based on the concepts of Type
Enforcement, Role-based Access Control, and Multi-level Security.
.
libselinux1 provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions. Required for any applications that use the SELinux
API. libselinux may use the shared libsepol to manipulate the binary
policy if necessary (e.g. to downgrade the policy format to an older
version supported by the kernel) when loading policy.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org
Package: libsemanage-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.3-1build2
Conffiles:
/etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
This package provides the common files used by the shared libraries
for SELinux policy management.
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org
Package: libsemanage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 3.3-1build2
Depends: libsemanage-common (>= 3.3-1build2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.33), libselinux1 (>= 3.3), libsepol2 (>= 3.3)
Breaks: policycoreutils (<< 3.0)
Description: SELinux policy management library
This package provides the shared libraries for SELinux policy management.
It uses libsepol for binary policy manipulation and libselinux for
interacting with the SELinux system. It also exec's helper programs
for loading policy and for checking whether the file_contexts
configuration is valid (load_policy and setfiles from
policycoreutils) presently, although this may change at least for the
bootstrapping case
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org
Package: libsensors-config
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lm-sensors
Version: 1:3.6.0-7ubuntu1
Replaces: libsensors4
Suggests: lm-sensors
Breaks: libsensors4
Conffiles:
/etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
/etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091
Description: lm-sensors configuration files
Lm-sensors is a hardware health monitoring package for Linux. It allows you
to access information from temperature, voltage, and fan speed sensors. It
works with most newer systems.
.
This library is only functional with a Linux kernel, it is provided on
non-Linux systems for portability reasons only.
.
This package contains the configuration files.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: libsensors4
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.4.0-4ubuntu0.1
Config-Version: 1:3.4.0-4ubuntu0.1
Depends: libc6 (>= 2.14)
Suggests: lm-sensors
Conffiles:
/etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e obsolete
/etc/sensors3.conf 2380011501bd2ad9e44f070c80a4c74d obsolete
Description: library to read temperature/voltage/fan sensors
Lm-sensors is a hardware health monitoring package for Linux. It allows you
to access information from temperature, voltage, and fan speed sensors. It
works with most newer systems.
.
This library is only functional with a Linux kernel, it is provided on
non-Linux systems for portability reasons only.
.
This package contains a shared library for querying lm-sensors.
Homepage: http://www.lm-sensors.org
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: libsensors5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.6.0-7ubuntu1
Depends: libsensors-config, libc6 (>= 2.33)
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
Lm-sensors is a hardware health monitoring package for Linux. It allows you
to access information from temperature, voltage, and fan speed sensors. It
works with most newer systems.
.
This library is only functional with a Linux kernel, it is provided on
non-Linux systems for portability reasons only.
.
This package contains a shared library for querying lm-sensors.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: libsepol2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 735
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.3-1build1
Depends: libc6 (>= 2.33)
Description: SELinux library for manipulating binary security policies
Security-enhanced Linux is a patch of the Linux kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.
.
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: libsgutils2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 294
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sg3-utils
Version: 1.46-1ubuntu0.22.04.1
Replaces: libsgutils2
Depends: libc6 (>= 2.33)
Suggests: sg3-utils
Conflicts: libsgutils2
Description: utilities for devices using the SCSI command set (shared libraries)
Most OSes have SCSI pass-through interfaces that enable user space programs
to send SCSI commands to a device and fetch the response. With SCSI to ATA
Translation (SAT) many ATA disks now can process SCSI commands. Typically
each utility in this package implements one SCSI command. See the draft
standards at www.t10.org for SCSI command definitions plus SAT. ATA
commands are defined in the draft standards at www.t13.org . For a mapping
between supported SCSI and ATA commands and utility names in this package
see the COVERAGE file
.
Shared library used by the utilities in the sg3-utils package.
Homepage: http://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.13-1ubuntu3
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
GNU libsigsegv is a library that allows handling page faults in a
portable way. It is used e.g. for generational garbage collectors
and stack overflow handlers.
.
This package contains the shared library.
Homepage: https://www.gnu.org/software/libsigsegv/
Original-Maintainer: Debian Common Lisp Team <debian-common-lisp@lists.debian.org>
Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1628
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.2-5build4
Depends: libc6 (>= 2.35)
Description: S-Lang programming library - runtime version
S-Lang is a C programmer's library that includes routines for the rapid
development of sophisticated, user friendly, multi-platform applications.
.
This package contains only the shared library libslang.so.* and copyright
information. It is only necessary for programs that use this library (such
as jed and slrn). If you plan on doing development with S-Lang, you will
need the companion -dev package as well.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Built-Using: unicode-data (= 14.0.0-1.1)
Homepage: http://www.jedsoft.org/slang/
Package: libslirp0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libslirp
Version: 4.6.1-1build1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.57.2)
Description: General purpose TCP-IP emulator library
libslirp is a user-mode networking library used by virtual machines,
containers or various tools.
.
This package contains the library itself.
Homepage: https://gitlab.freedesktop.org/slirp/libslirp
Original-Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1build2
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Description: X11 Session Management library
This package provides the main interface to the X11 Session Management
library, which allows for applications to both manage sessions, and make use
of session managers to save and restore their state for later use.
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libc6 (>= 2.14)
Description: smart column output alignment library
This smart column output alignment library is used by fdisk utilities.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: libsmbclient
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 335
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Depends: samba-libs (= 2:4.15.13+dfsg-0ubuntu1.5), libbsd0 (>= 0.0), libc6 (>= 2.14), libtalloc2 (>= 2.3.3~), libtevent0 (>= 0.11.0~), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5)
Pre-Depends: dpkg (>= 1.15.6~)
Description: shared library for communication with SMB/CIFS servers
This package provides a shared library that enables client applications
to talk to Microsoft Windows and Samba servers using the SMB/CIFS
protocol.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: libsmbios-c2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsmbios
Version: 2.4.3-1build1
Replaces: libsmbios2, libsmbios2v5
Provides: libsmbios2 (= 2.3.1-1), libsmbios2v5 (= 2.3.1-0ubuntu2)
Depends: libc6 (>= 2.33)
Suggests: libsmbios-doc
Conflicts: libsmbios2, libsmbios2v5
Description: Provide access to (SM)BIOS information -- dynamic library
libsmbios aims towards providing access to as much BIOS information as
possible. It does this by providing a library of functions that can be used
as well as sample binaries.
.
It incorporates extensible access to SMBIOS information capabilities and
ability to perform unit tests across multiple systems without using physical
hardware. Moreover, centralized, data-driven exception handling for broken
BIOS tables is provided. Currently, full access to the SMBIOS table and its
items is implemented. Additionally, access and manipulation of Dell Indexed
IO Token (type 0xD4) is implemented. This token is a vendor-extention
SMBIOS structure which allows uniform access to manipulate the system CMOS
to enable, disable, or otherwise manipulate normal BIOS functions or features.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: https://github.com/dell/libsmbios/
Package: libsnmp-base
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 711
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: net-snmp
Version: 5.8+dfsg-2ubuntu2.9
Config-Version: 5.8+dfsg-2ubuntu2.9
Replaces: snmp (<< 5.7.3+dfsg-5)
Suggests: snmp-mibs-downloader
Breaks: snmp (<< 5.7.3+dfsg-5)
Conffiles:
/etc/snmp/snmp.conf 72b4d550c66b2221e3c418c34395cc66
Description: SNMP configuration script, MIBs and documentation
The Simple Network Management Protocol (SNMP) provides a framework
for the exchange of management information between agents (servers)
and clients.
.
This package includes documentation and MIBs (Management Information Bases)
for the SNMP libraries, agents and applications. MIBs contain a formal
description of the data that can be managed using SNMP and applications.
.
NOTE: If you want the OIDs (Object Identifiers) to resolve to their text
description, you need to activate the non-free repository and install the
"snmp-mibs-downloader" package.
Homepage: http://net-snmp.sourceforge.net/
Original-Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Package: libsodium23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 402
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1build2
Depends: libc6 (>= 2.33)
Description: Network communication, cryptography and signaturing library
NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
network communication, encryption, decryption, signatures, etc.
.
NaCl's goal is to provide all of the core operations needed to build
higher-level cryptographic tools.
.
Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
with a compatible API.
Homepage: https://www.libsodium.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libsort-naturally-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.03-2
Depends: perl
Description: Sort naturally - sort lexically except for numerical parts
Sort::Naturally exports two functions, nsort and ncmp; they are used
in implementing the idea of "natural sorting" algorithm. With that natural
sorting, numeric substrings are compared numerically, and other
word-characters are compared lexically.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Sort-Naturally
Package: libsource-highlight-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: source-highlight
Version: 3.1.9-4.1build2
Replaces: source-highlight (<< 3.1.4-1)
Description: architecture-independent files for source highlighting library
This package contains the data files used by the libsource-highlight
library, which is the library that underlies the source-highlight
program suite. The library converts source code to a document with
syntax highlighting and supports many file formats. The library can
be used by other C++ programs to get source code highlighting
capabilities.
Original-Maintainer: Kartik Kulkarni <kartik.koolks@gmail.com>
Homepage: http://www.gnu.org/software/src-highlite/
Package: libsource-highlight4v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 610
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: source-highlight
Version: 3.1.9-4.1build2
Replaces: libsource-highlight4
Depends: libsource-highlight-common, libboost-regex1.74.0-icu70, libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Conflicts: libsource-highlight4
Description: source highlighting library
This is the library that underlies the source-highlight program
suite. It converts source code to a document with syntax
highlighting and supports many file formats. The library can be used
by other C++ programs to get source code highlighting capabilities.
Original-Maintainer: Kartik Kulkarni <kartik.koolks@gmail.com>
Homepage: http://www.gnu.org/software/src-highlite/
Package: libsqlite3-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1602
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.37.2-2ubuntu0.1
Depends: libc6 (>= 2.34)
Breaks: python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
SQLite is a C library that implements an SQL database engine.
Programs that link with the SQLite library can have SQL database
access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.34)
Description: command-line interface parsing library
libss provides a simple command-line interface parser which will
accept input from the user, parse the command into an argv argument
vector, and then dispatch it to a handler function.
.
It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: libssh-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 486
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.9.6-2ubuntu0.22.04.1
Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Breaks: remmina (<< 1.2.31.2+dfsg-1+), remmina-plugin-nx (<< 1.2.31.2+dfsg-1+), x2goclient (<< 4.1.2.1-1+)
Description: tiny C SSH library (OpenSSL flavor)
The ssh library was designed to be used by programmers needing a working SSH
implementation by the mean of a library. The complete control of the client
is made by the programmer. With libssh, you can remotely execute programs,
transfer files, use a secure and transparent tunnel for your remote programs.
With its SFTP implementation, you can play with remote files easily.
.
This package contains shared libraries linked against OpenSSL.
Homepage: https://www.libssh.org/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: libssl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 12099
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.2-0ubuntu1.15
Depends: libssl3 (= 3.0.2-0ubuntu1.15)
Suggests: libssl-doc
Conflicts: libssl1.0-dev
Description: Secure Sockets Layer toolkit - development files
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It contains development libraries, header files, and manpages for libssl
and libcrypto.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2n-1ubuntu5.13
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Package: libssl1.1
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 4029
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.1.1f-1ubuntu2.20
Config-Version: 1.1.1f-1ubuntu2.20
Depends: libc6 (>= 2.25), debconf (>= 0.5) | debconf-2.0
Breaks: isync (<< 1.3.0-2), lighttpd (<< 1.4.49-2), python-boto (<< 2.44.0-1.1), python-httplib2 (<< 0.11.3-1), python-imaplib2 (<< 2.57-5), python3-boto (<< 2.44.0-1.1), python3-imaplib2 (<< 2.57-5)
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Package: libssl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5833
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.2-0ubuntu1.15
Depends: libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Package: libstdc++-11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18759
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Provides: libstdc++-dev
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), libgcc-11-dev (= 11.4.0-1ubuntu1~22.04), libstdc++6 (>= 11.4.0-1ubuntu1~22.04), libc6-dev (>= 2.13-0ubuntu6)
Suggests: libstdc++-11-doc
Description: GNU Standard C++ Library v3 (development files)
This package contains the headers and static library files necessary for
building C++ programs which use libstdc++.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2755
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Replaces: libstdc++6-12-dbg (<< 4.9.0-3)
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
This package contains an additional runtime library for C++ programs
built with the GNU compiler.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libstemmer0d
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 839
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: snowball
Version: 2.2.0-1build1
Depends: libc6 (>= 2.4)
Description: Snowball stemming algorithms for use in Information Retrieval
Snowball provides access to efficient algorithms for calculating a
"stemmed" form of a word. This is a form with most of the common
morphological endings removed; hopefully representing a common
linguistic base form. This is most useful in building search engines
and information retrieval software; for example, a search with stemming
enabled should be able to find a document containing "cycling" given the
query "cycles".
.
Snowball provides algorithms for several (mainly European) languages.
It also provides access to the classic Porter stemming algorithm for
English: although this has been superseded by an improved algorithm, the
original algorithm may be of interest to information retrieval
researchers wishing to reproduce results of earlier experiments.
Homepage: https://snowballstem.org/
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Package: libsystemd0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 995
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.11
Pre-Depends: libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.4.0)
Description: systemd utility library
The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: libtalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: talloc
Version: 2.3.3-2build1
Depends: libc6 (>= 2.16)
Breaks: python3-talloc (<< 2.1.13-2~)
Description: hierarchical pool based memory allocator
A hierarchical pool based memory allocator with destructors. It uses
reference counting to determine when memory should be freed.
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Homepage: https://talloc.samba.org/
Package: libtasn1-6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 133
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.18.0-4build1
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
Manage ASN1 (Abstract Syntax Notation One) structures.
The main features of this library are:
* on-line ASN1 structure management that doesn't require any C code
file generation.
* off-line ASN1 structure management with C code file generation
containing an array.
* DER (Distinguish Encoding Rules) encoding
* no limits for INTEGER and ENUMERATED values
.
This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libtcl8.6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4091
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tcl8.6
Version: 8.6.12+dfsg-1build1
Replaces: tcl8.6 (<< 8.6.0-2)
Provides: libtcl
Depends: tzdata, libc6 (>= 2.35), zlib1g (>= 1:1.2.2)
Suggests: tcl8.6
Breaks: nsf (<< 2.2.0)
Conflicts: tcl74 (<= 7.4p3-2), tcl8.6 (<< 8.6.0-2)
Description: Tcl (the Tool Command Language) v8.6 - run-time library files
Tcl is a powerful, easy to use, embeddable, cross-platform interpreted
scripting language. This package contains the Tcl library and auxiliary
code which allows one to run Tcl-enabled applications. This version
includes thread support.
Homepage: http://www.tcl.tk/
Original-Maintainer: Debian Tcl/Tk Packagers <pkg-tcltk-devel@lists.alioth.debian.org>
Package: libtdb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tdb
Version: 1.4.5-2build1
Depends: libc6 (>= 2.34)
Description: Trivial Database - shared library
This is a simple database API. It is modelled after the structure
of GDBM. TDB features, unlike GDBM, multiple writers support with
appropriate locking and transactions.
.
This package contains the shared library file.
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Homepage: https://tdb.samba.org/
Package: libterm-readkey-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.38-1build4
Depends: perl, perlapi-5.34.0, libc6 (>= 2.28)
Description: perl module for simple terminal control
Term::ReadKey is a compiled perl module dedicated to providing simple
control over terminal driver modes (cbreak, raw, cooked, etc.) support for
non-blocking reads, if the architecture allows, and some generalized handy
functions for working with terminals. One of the main goals is to have the
functions as portable as possible, so you can just plug in "use
Term::ReadKey" on any architecture and have a good likelihood of it working.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/TermReadKey
Package: libtevent0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tevent
Version: 0.11.0-1build1
Depends: libc6 (>= 2.34), libtalloc2 (>= 2.3.2~)
Description: talloc-based event loop library - shared library
tevent is a simple library that can handle the main event loop for an
application. It supports three kinds of events: timed events, file
descriptors becoming readable or writable and signals.
.
Talloc is used for memory management, both internally and for private
data provided by users of the library.
.
This package provides the shared library file.
Homepage: https://tevent.samba.org/
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: libtext-charwidth-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-10build3
Depends: libc6 (>= 2.34), perl-base, perlapi-5.34.0
Description: get display widths of characters on the terminal
Text::CharWidth permits one to get the display widths of characters
and strings on the terminal, using wcwidth() and wcswidth() from libc.
.
It provides mbwidth(), mbswidth(), and mblen().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-CharWidth
Package: libtext-iconv-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7-7build3
Depends: libc6 (>= 2.34), perl-base, perlapi-5.34.0
Description: module to convert between character sets in Perl
The iconv() family of functions from XPG4 defines an API for converting
between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
are provided by libc6.
.
This package allows access to them from Perl via the Text::Iconv
package.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-Iconv
Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.06-9
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
The Text::WrapI18N module is a substitution for Text::Wrap, supporting
multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters
such as east Asian characters, combining characters such as diacritical marks
and Thai, and languages which don't use whitespaces between words such as
Chinese and Japanese.
.
It provides wrap().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-WrapI18N
Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-1build1
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
LibThai is a set of Thai language support routines aimed to ease
developers' tasks to incorporate Thai language support in their applications.
It includes important Thai-specific functions e.g. word breaking, input and
output methods as well as basic character and string supports.
.
This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libthai
Version: 0.1.29-1build1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
LibThai is a set of Thai language support routines aimed to ease
developers' tasks to incorporate Thai language support in their applications.
It includes important Thai-specific functions e.g. word breaking, input and
output methods as well as basic character and string supports.
.
This package contains the shared libraries needed to run programs that use
the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Package: libtie-ixhash-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.23-2.1
Depends: perl:any
Description: Perl module to order associative arrays
Tie::IxHash implements Perl hashes that preserve the order in which the
hash elements were added. The order is not affected when values
corresponding to existing keys in the IxHash are changed. The elements can
also be set to any arbitrary supplied order. The familiar perl array
operations can also be performed on the IxHash.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Tie-IxHash
Package: libtiff5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 581
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.3.0-6ubuntu0.8
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblzma5 (>= 5.1.1alpha+20120614), libwebp7, libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
TimeDate is a collection of Perl modules useful for manipulating date and
time information. Date::Parse can parse absolute date specifications in a
wide variety of input formats and many languages (via Date::Language).
.
This package also includes Date::Format, which can format dates into strings,
as well as Time::Zone, which contains miscellaneous time zone functions.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/TimeDate
Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libc6 (>= 2.33)
Description: shared low-level terminfo library (legacy version)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the legacy version of the shared low-level
terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libtinfo6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 558
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libc6 (>= 2.33)
Description: shared low-level terminfo library for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Replaces: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Conffiles:
/etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
This package contains a port of Sun's transport-independent RPC library to
Linux. The library is intended as a replacement for the RPC code in the GNU C
library, providing among others support for RPC (and in turn, NFS) over IPv6.
.
This package contains the netconfig configuration file as well as the
associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>
Package: libtirpc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 720
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Depends: libtirpc3 (= 1.3.2-2ubuntu0.1)
Description: transport-independent RPC library - development files
This package contains a port of Sun's transport-independent RPC library to
Linux. The library is intended as a replacement for the RPC code in the GNU C
library, providing among others support for RPC (and in turn, NFS) over IPv6.
.
This package contains the files needed for development against libtirpc.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>
Package: libtirpc1
Status: deinstall ok config-files
Priority: standard
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 0.2.5-1.2ubuntu0.1
Config-Version: 0.2.5-1.2ubuntu0.1
Depends: libc6 (>= 2.16), libgssapi-krb5-2 (>= 1.14+dfsg)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Conffiles:
/etc/netconfig ca8db53e3af4d735335c2607d21c7195 obsolete
Description: transport-independent RPC library
This package contains a port of Sun's transport-independent RPC library to
Linux. The library is intended as a replacement for the RPC code in the GNU C
library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: libtirpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.2-2ubuntu0.1)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
This package contains a port of Sun's transport-independent RPC library to
Linux. The library is intended as a replacement for the RPC code in the GNU C
library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>
Package: libtry-tiny-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.31-1
Depends: perl:any
Suggests: libsub-name-perl
Description: module providing minimalistic try/catch
Try::Tiny is a Perl module that provides bare bones try/catch statements. It
is designed to eliminate common mistakes with eval blocks, and NOTHING else.
.
The main focus of this module is to provide simple and reliable error
handling for those having a hard time installing TryCatch, but who still want
to write correct eval blocks without 5 lines of boilerplate each time.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Try-Tiny
Package: libtsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7255
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libtss2-esys-3.0.2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 623
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.2-1)
Depends: libtss2-tcti-cmd0, libtss2-tcti-device0, libtss2-tcti-mssim0, libtss2-tcti-swtpm0, tpm-udev, libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), libtss2-mu0 (>= 3.0.1), libtss2-sys1 (>= 3.1.0)
Breaks: libtss2-esys0 (<< 3.0.2-1)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TSS esys libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-mu0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 344
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.14)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TSS mu libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-sys1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 170
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.4), libtss2-mu0 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TSS sys libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-tcti-cmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.7), libtss2-mu0 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TCTI cmd libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-tcti-device0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.4), libtss2-mu0 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TCTI device libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-tcti-mssim0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.7), libtss2-mu0 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TCTI mssim libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtss2-tcti-swtpm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Mathieu Trudel-Lapierre <cyphermox@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 3.2.0-1ubuntu1
Replaces: libtss2-esys0 (<< 3.0.1-2)
Depends: tpm-udev, libc6 (>= 2.14), libtss2-mu0 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2)
Description: TPM2 Software stack library - TSS and TCTI libraries
TPM2.0 TSS (Software Stack) consists of API layers provided to support
TPM 2.0 chips. It is made out of three layers:
.
- Enhanced System API (ESAPI)
- System API (SAPI), which implements the system layer API;
- Marshaling/Unmarshaling (MU)
- TPM Command Transmission Interface (TCTI), which is used by SAPI to
allow communication with the TAB/RM layer;
.
This package contains the TCTI swtpm libraries that client applications
will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss
Package: libtypes-serialiser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.01-1
Depends: perl:any, libcommon-sense-perl
Description: module providing simple data types for common serialisation formats
Types::Serialiser provides some extra datatypes that are used by common
serialisation formats such as JSON or CBOR. The idea is to have a repository
of simple/small constants and containers that can be shared by different
implementations so they become interoperable between each other.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Types-Serialiser
Package: libubsan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2676
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
Various computations will be instrumented to detect undefined behavior
at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libuchardet0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: uchardet
Version: 0.0.7-1build2
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 4.1.1)
Description: universal charset detection library - shared library
uchardet is a C language binding of the original C++ implementation
of the universal charset detection library by Mozilla.
.
uchardet is a encoding detector library, which takes a sequence of
bytes in an unknown character encoding without any additional
information, and attempts to determine the encoding of the text.
.
This package contains the shared library.
Homepage: https://www.freedesktop.org/wiki/Software/uchardet/
Original-Maintainer: James Cowgill <jcowgill@debian.org>
Package: libudev1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.11
Depends: libc6 (>= 2.34)
Description: libudev shared library
This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: libudisks2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 835
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: udisks2
Version: 2.9.4-1ubuntu2
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.50)
Description: GObject based library to access udisks2
The udisks daemon serves as an interface to system block devices,
implemented via D-Bus. It handles operations such as querying, mounting,
unmounting, formatting, or detaching storage devices such as hard disks
or USB thumb drives.
.
This provides a convenience library for communicating with udisks2 from
GObject based programs.
Homepage: https://www.freedesktop.org/wiki/Software/udisks
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libunistring0
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 1156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 0.9.3-5.2ubuntu1
Config-Version: 0.9.3-5.2ubuntu1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Unicode string library for C
The 'libunistring' library implements Unicode strings (in the UTF-8,
UTF-16, and UTF-32 encodings), together with functions for Unicode
characters (character names, classifications, properties) and
functions for string processing (formatted output, width, word
breaks, line breaks, normalization, case folding, regular
expressions).
.
This package contains the shared library.
Homepage: http://www.gnu.org/software/libunistring/
Original-Maintainer: Andreas Rottmann <rotty@debian.org>
Package: libunistring2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1746
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.0-1
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
The 'libunistring' library implements Unicode strings (in the UTF-8,
UTF-16, and UTF-32 encodings), together with functions for Unicode
characters (character names, classifications, properties) and
functions for string processing (formatted output, width, word
breaks, line breaks, normalization, case folding, regular
expressions).
.
This package contains the shared library.
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: https://www.gnu.org/software/libunistring/
Package: libunwind8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 196
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunwind
Version: 1.3.2-2build2.1
Replaces: libgcc1 (<< 1:4.0.0-2)
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20110809)
Conflicts: libunwind1-dev
Description: library to determine the call-chain of a program - runtime
The primary goal of this project is to define a portable and efficient C
programming interface (API) to determine the call-chain of a program.
The API additionally provides the means to manipulate the preserved
(callee-saved) state of each call-frame and to resume execution at any
point in the call-chain (non-local goto). The API supports both local
(same-process) and remote (across-process) operation. As such, the API
is useful in a number of applications.
.
This package includes the shared libraries
Homepage: http://www.nongnu.org/libunwind
Original-Maintainer: Adrian Bunk <bunk@debian.org>
Package: liburcu8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 331
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liburcu
Version: 0.13.1-1
Depends: libc6 (>= 2.34)
Description: userspace RCU (read-copy-update) library
This data synchronization library provides read-side access which scales
linearly with the number of cores. It does so by allowing multiples copies of
a given data structure to live at the same time, and by monitoring the data
structure accesses to detect grace periods after which memory reclamation is
possible.
Original-Maintainer: Jon Bernard <jbernard@debian.org>
Homepage: https://liburcu.org/
Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.10-1
Depends: perl:any
Suggests: libbusiness-isbn-perl (>= 3.005), libwww-perl
Description: module to manipulate and access URI strings
URI is a collection of Perl modules that represent and manipulate Uniform
Resource Identifier (URI) references as specified in RFC 2396.
.
URI objects can be used to access and manipulate the various components
that make up these strings. There are also methods to combine URIs in
various ways.
.
The URI class replaces the URI::URL class that used to be distributed with
libwww-perl. This package also includes an emulation of the old URI::URL
interface, which implements both the old and the new interface.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/URI
Package: liburing2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liburing
Version: 2.1-2build1
Depends: libc6 (>= 2.4)
Description: Linux kernel io_uring access library - shared library
This library provides helpers to setup and teardown io_uring instances,
and also a simplified interface for applications that do not need (or
want) to deal with the full kernel side implementation.
.
This package contains the shared library.
Homepage: https://github.com/axboe/liburing
Original-Maintainer: Guillem Jover <guillem@debian.org>
Package: liburiparser1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: uriparser
Version: 0.9.6+dfsg-1
Depends: libc6 (>= 2.26)
Description: URI parsing library compliant with RFC 3986
uriparser is a library that parses Uniform Resource Identifiers (URIs),
strictly adhering to RFC 3986 where syntax for URIs is defined. URIs
are used to identify resources, like http://www.debian.org/ or
urn:isbn:0-395-36341-1.
.
uriparser has the following features:
.
* strictly compliant to RFC 3986, implementing:
+ parsing
+ reference resolution
+ reference creation
+ recomposition
+ syntax-based normalization
* fast (linear input length time complexity)
* unicode support
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: http://uriparser.sourceforge.net
Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-32build3
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
This package contains what you need to run programs that use this
library.
Homepage: http://www.linux-usb.org/
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.25-1ubuntu2
Depends: libc6 (>= 2.34), libudev1 (>= 183)
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
This package contains what you need to run programs that use this
library.
Homepage: http://www.libusb.info
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: libustr-1.0-1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.14)
Description: Micro string library: shared library
ustr (Micro string library) is a string API for C. It has tiny overhead over
just plain strdup(), is much safer, is easier to use, is faster for many
operations, can be used with read-only or automatically allocated data. You
don't even need to link to the library to use it (so there are no
dependencies).
.
This package contains the shared library.
Original-Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Homepage: http://www.and.org/ustr/
Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.2.1-2build2
Depends: libc6 (>= 2.34)
Description: privileged helper for utmp/wtmp updates (runtime)
The libutempter library provides interface for terminal emulators such as
screen and xterm to record user sessions to utmp and wtmp files.
.
The utempter is a privileged helper used by libutempter library to manipulate
utmp and wtmp files.
Homepage: http://git.altlinux.org/people/ldv/packages/?p=libutempter.git
Original-Maintainer: Christian Göttsche <cgzones@googlemail.com>
Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: libc6 (>= 2.25)
Recommends: uuid-runtime
Description: Universally Unique ID library
The libuuid library generates and parses 128-bit Universally Unique
IDs (UUIDs). A UUID is an identifier that is unique within the space
of all such identifiers across both space and time. It can be used for
multiple purposes, from tagging objects with an extremely short lifetime
to reliably identifying very persistent objects across a network.
.
See RFC 4122 for more information.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 252
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.43.0-1
Depends: libc6 (>= 2.34)
Description: asynchronous event notification library - runtime library
Libuv is the asynchronous library behind Node.js. Very similar to libevent or
libev, it provides the main elements for event driven systems: watching and
waiting for availability in a set of sockets, and some other events like timers
or asynchronous messages. However, libuv also comes with some other extras
like:
* files watchers and asynchronous operations
* a portable TCP and UDP API, as well as asynchronous DNS resolution
* processes and threads management, and a portable inter-process
communications mechanism, with pipes and work queues
* a plugins mechanism for loading libraries dynamically
* interface with external libraries that also need to access the I/O.
.
This package includes the dynamic library against which you can link
your program.
Original-Maintainer: Dominique Dumont <dod@debian.org>
Homepage: https://github.com/libuv/libuv
Package: libvolume-key1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: volume-key
Version: 0.3.12-3.1build3
Depends: libblkid1 (>= 2.16), libc6 (>= 2.14), libcryptsetup12 (>= 2:1.4), libglib2.0-0 (>= 2.18.0), libgpgme11 (>= 1.4.1), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.13.4-2~), gnupg
Description: Library for manipulating storage encryption keys and passphrases
This package provides libvolume_key, a library for manipulating storage volume
encryption keys and storing them separately from volumes.
.
The main goal of the software is to allow restoring access to an encrypted
hard drive if the primary user forgets the passphrase. The encryption key
back up can also be useful for extracting data after a hardware or software
failure that corrupts the header of the encrypted volume, or to access the
company data after an employee leaves abruptly.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://pagure.io/volume_key
Package: libvte-2.91-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 569
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: vte2.91
Version: 0.68.0-1ubuntu0.1
Depends: libvte-2.91-common (= 0.68.0-1ubuntu0.1), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.34), libcairo2 (>= 1.10.0), libfribidi0 (>= 1.0.0), libgcc-s1 (>= 3.3.1), libglib2.0-0 (>= 2.52.0), libgnutls30 (>= 3.7.2), libgtk-3-0 (>= 3.24.22), libicu70 (>= 70.1-1~), libpango-1.0-0 (>= 1.44.3), libpangocairo-1.0-0 (>= 1.22.0), libpcre2-8-0 (>= 10.22), libstdc++6 (>= 11), libsystemd0 (>= 220), zlib1g (>= 1:1.2.0)
Description: Terminal emulator widget for GTK+ 3.0 - runtime files
The VTE library provides a terminal emulator widget VteTerminal for
applications using the GTK+ toolkit. It also provides the VtePTY object
containing functions for starting a new process on a new
pseudo-terminal and for manipulating pseudo-terminals.
.
This package contains the runtime library, needed by programs using the
VTE widget with GTK+ 3.0.
Homepage: https://wiki.gnome.org/Apps/Terminal/VTE
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libvte-2.91-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 152
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: vte2.91
Version: 0.68.0-1ubuntu0.1
Depends: libc6 (>= 2.34)
Conffiles:
/etc/profile.d/vte-2.91.sh a1f60728d39e70bdfb1039b296dd52ca
/etc/profile.d/vte.csh 1f922824a6d29c466178d0834d17321c
Description: Terminal emulator widget for GTK+ 3.0 - common files
The VTE library provides a terminal emulator widget VteTerminal for
applications using the GTK+ toolkit. It also provides the VtePTY object
containing functions for starting a new process on a new
pseudo-terminal and for manipulating pseudo-terminals.
.
This package contains internationalization files for the VTE library
and common files for the GTK+ 3.x version.
Homepage: https://wiki.gnome.org/Apps/Terminal/VTE
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libvted-3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gtk-d
Version: 3.10.0-1ubuntu1
Depends: libvte-2.91-0, libc6 (>= 2.14), libgcc-s1 (>= 3.0), libphobos2-ldc-shared98 (>= 1:1.28.0)
Description: Terminal emulator widget for GTK+ - D bindings
The VTE library provides a terminal emulator widget VteTerminal for
applications using the GTK+ toolkit.
It also provides the VtePTY object containing functions for starting a
new process on a new pseudo-terminal and for manipulating pseudo-terminals.
.
This package contains the D language bindings for VTE.
Homepage: https://gtkd.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libffi8 (>= 3.4)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - client library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships the library that implements the client side of
the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - cursor library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland-egl1-mesa (<< 18.0.5-0)
Provides: libwayland-egl1-mesa
Depends: libc6 (>= 2.2.5)
Breaks: libwayland-egl1-mesa (<< 18.0.5-0)
Description: wayland compositor infrastructure - EGL library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships the library that implements the Wayland EGL platform
of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libwayland-server0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.34), libffi8 (>= 3.4)
Breaks: weston (<< 1.2.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - server library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships the library that implements the server side of
the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libwbclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 857
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Depends: libbsd0 (>= 0.5.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.0), libicu70 (>= 70.1-1~), libsystemd0, libtalloc2 (>= 2.3.3~), libtevent0 (>= 0.11.0~)
Pre-Depends: dpkg (>= 1.15.6~)
Breaks: samba-libs (<< 2:4.11.0+dfsg-1~)
Description: Samba winbind client library
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file and printer sharing with
Microsoft Windows, OS X, and other Unix systems.
.
This package provides a library for client applications that interact
via the winbind pipe protocol with a Samba winbind server.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.2-2ubuntu0.22.04.2
Depends: libc6 (>= 2.34)
Description: Lossy compression of digital photographic images
Image Compression format, based on the VP8 codec.
WebP uses the modern VP8 compression format to deliver efficient
compression of images for the web. More than 30% extra gain over
optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-31build2
Depends: libc6 (>= 2.33), libnsl2 (>= 1.0)
Description: Wietse Venema's TCP wrappers library
Wietse Venema's network logger, also known as TCPD or LOG_TCP.
.
These programs log the client host name of incoming telnet,
ftp, rsh, rlogin, finger etc. requests.
.
Security options are:
- access control per host, domain and/or service;
- detection of host name spoofing or host address spoofing;
- booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: libwww-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 380
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 6.61-1
Depends: perl:any, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl, libtry-tiny-perl, liburi-perl, libwww-robotrules-perl, netbase
Recommends: libdata-dump-perl, libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl
Suggests: libauthen-ntlm-perl
Description: simple and consistent interface to the world-wide web
libwww-perl (also known as LWP) is a collection of Perl modules that provide
a simple and consistent programming interface (API) to the World-Wide Web.
The main focus of the library is to provide classes and functions that allow
you to write WWW clients. It also contains general purpose modules, as well
as a simple HTTP/1.1-compatible server implementation.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/libwww-perl
Package: libwww-robotrules-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, liburi-perl
Breaks: libwww-perl (<< 6.00)
Description: database of robots.txt-derived permissions
WWW::RobotRules parses /robots.txt files as specified in "A Standard for
Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters
can use the /robots.txt file to forbid conforming robots from accessing parts
of their web site.
.
The parsed files are kept in a WWW::RobotRules object, and this object
provides methods to check if access to a given URL is prohibited. The same
WWW::RobotRules object can be used for one or more parsed /robots.txt files
on any number of hosts.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/WWW-RobotRules
Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Depends: libc6 (>= 2.34), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
This package provides a client interface to the X Window System, otherwise
known as 'Xlib'. It provides a complete API for the basic functions of the
window system.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
This package provides the locale data files for libx11.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libx11-protocol-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 366
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.56-7.1
Depends: perl:any
Recommends: perl (>= 5.19.8) | libio-socket-ip-perl
Description: Perl module for the X Window System Protocol, version 11
X11::Protocol is a client-side interface to the X11 Protocol (see X(1) for
information about X11), allowing perl programs to display windows and
graphics on X11 servers.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/X11-Protocol
Package: libx11-xcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Depends: libx11-6 (= 2:1.7.5-1ubuntu0.3)
Description: Xlib/XCB interface library
libX11-xcb provides functions needed by clients which take advantage of
Xlib/XCB to mix calls to both Xlib and XCB over the same X connection.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
More information about XCB can be found at:
<URL:https://xcb.freedesktop.org>
.
This module can be found at
https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1build5
Depends: libc6 (>= 2.33)
Description: X11 authorisation library
This package provides the main interface to the X11 authorisation handling,
which controls authorisation for X connections, both client-side and
server-side.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
https://gitlab.freedesktop.org/xorg/lib/libxau
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxaw7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 495
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxaw
Version: 2:1.0.14-1
Depends: libc6 (>= 2.15), libx11-6, libxext6, libxmu6 (>= 2:1.1.3), libxpm4, libxt6
Description: X11 Athena Widget library
libXaw7 provides the second version of Xaw, the Athena Widgets toolkit,
which is largely used by legacy X applications. This version is the
most common version, as version 6 is considered deprecated, and version
8, which adds Xprint support, is unsupported and not widely used.
In general, use of a more modern toolkit such as GTK+ is recommended.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXaw
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-dri2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, dri2 extension
This package contains the library files needed to run software using
libxcb-dri2, the dri2 extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-dri3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, dri3 extension
This package contains the library files needed to run software using
libxcb-dri3, the dri3 extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-glx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, glx extension
This package contains the library files needed to run software using
libxcb-glx, the glx extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-present0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, present extension
This package contains the library files needed to run software using
libxcb-present, the present extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-randr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2)
Description: X C Binding, randr extension
This package contains the library files needed to run software using
libxcb-randr, the randr extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
This package contains the library files needed to run software using
libxcb-render, the render extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-shape0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, shape extension
This package contains the library files needed to run software using
libxcb-shape, the shape extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
This package contains the library files needed to run software using
libxcb-shm, the shm extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-sync1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxcb1
Description: X C Binding, sync extension
This package contains the library files needed to run software using
libxcb-sync, the sync extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb-xfixes0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, xfixes extension
This package contains the library files needed to run software using
libxcb-xfixes, the xfixes extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxau6 (>= 1:1.0.9), libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
This package contains the library files needed to run software using libxcb,
the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcomposite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.5-1build2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 Composite extension library
libXcomposite provides an X Window System client interface to the Composite
extension to the X protocol.
.
The Composite extension allows clients called compositing managers to control
the final drawing of the screen. Rendering is done into an off-screen buffer.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.2.0-2build4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
Xcursor is a simple library designed to help locate and load cursors for the
X Window System. Cursors can be loaded from files or memory and can exist in
several sizes; the library automatically picks the best size. When using
images loaded from files, Xcursor prefers to use the Render extension's
CreateCursor request for rendering cursors. Where the Render extension is
not supported, Xcursor maps the cursor image to a standard X cursor and uses
the core X protocol CreateCursor request.
.
Preferred themes for cursors can be installed if desired, via
xcursor-themes or other cursor-theme or icon-theme packages,
configured with update-alternatives --config x-cursor-theme.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxdamage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdamage
Version: 1:1.1.5-2build2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 damaged region extension library
libXdamage provides an X Window System client interface to the DAMAGE
extension to the X protocol.
.
The Damage extension provides for notification of when on-screen regions have
been 'damaged' (altered).
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdamage
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.3-0ubuntu5
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
This package provides the main interface to the X11 display manager control
protocol library, which allows for remote logins to display managers.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.4-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
libXext provides an X Window System client interface to several extensions to
the X protocol.
.
The supported protocol extensions are:
- DOUBLE-BUFFER (DBE), the Double Buffer extension;
- DPMS, the VESA Display Power Management System extension;
- Extended-Visual-Information (EVI), an extension for gathering extra
information about the X server's visuals;
- LBX, the Low Bandwidth X extension;
- MIT-SHM, the MIT X client/server shared memory extension;
- MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
- Multi-Buffering, the multi-buffering and stereo display extension;
- SECURITY, the X security extension;
- SHAPE, the non-rectangular shaped window extension;
- SYNC, the X synchronization extension;
- TOG-CUP, the Open Group's Colormap Utilization extension;
- XC-APPGROUP, the X Consortium's Application Group extension;
- XC-MISC, the X Consortium's resource ID querying extension;
- XTEST, the X test extension (this is one of two client-side
implementations; the other is in the libXtst library, provided by the
libxtst6 package);
.
libXext also provides a small set of utility functions to aid authors of
client APIs for X protocol extensions.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:6.0.0-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
libXfixes provides an X Window System client interface to the 'XFIXES'
extension to the X protocol.
.
It provides support for Region types, and some cursor functions.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXfixes
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxft2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xft
Version: 2.3.4-1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.3.5), libx11-6, libxrender1
Description: FreeType-based font drawing library for X
Xft provides a client-side font API for X applications, making the FreeType
font rasterizer available to X clients. Fontconfig is used for font
specification resolution. Where available, the RENDER extension handles
glyph drawing; otherwise, the core X protocol is used.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.8-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
libXi provides an X Window System client interface to the XINPUT
extension to the X protocol.
.
The Input extension allows setup and configuration of multiple input devices,
and hotplugging of input devices (to be added and removed on the fly).
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxinerama1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxinerama
Version: 2:1.1.4-3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Xinerama extension library
libXinerama provides an X Window System client interface to the XINERAMA
extension to the X protocol.
.
The Xinerama (also known as panoramiX) extension allows for multiple screens
attached to a single display to be treated as belonging together, and to give
desktop applications a better idea of the monitor layout.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 1.4.0-1
Depends: xkb-data, libc6 (>= 2.33)
Description: library interface to the XKB compiler - shared library
This package provides a library to handle keyboard descriptions, including
loading them from disk, parsing them and handling their state. It's mainly
meant for client toolkits, window systems, and other system applications;
currently that includes Wayland, kmscon, GTK+, Clutter, and more.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
https://github.com/xkbcommon/libxkbcommon.git
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: http://www.xkbcommon.org/
Package: libxkbfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxkbfile
Version: 1:1.1.0-1build3
Depends: libc6 (>= 2.14), libx11-6
Description: X11 keyboard file manipulation library
libxkbfile provides an interface to read and manipulate description files for
XKB, the X11 keyboard configuration extension.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libxkbfile
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.46-3build1
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libexpat1 (>= 2.0.1), liburi-perl, libwww-perl
Description: Perl module for parsing XML files
The XML::Parser module provides ways to parse XML documents. It is built on
top of XML::Parser::Expat, which is a lower level interface to James Clark's
expat library. Each call to one of the parsing methods creates a new instance
of XML::Parser::Expat which is then used to parse the document. Expat options
may be provided when the XML::Parser object is created. These options are
then passed on to the Expat object on each parse call. They can also be given
as extra arguments to the parse methods, in which case they override options
given at XML::Parser creation time.
.
The behavior of the parser is controlled either by Style and/or Handlers
options, or by setHandlers method. These all provide mechanisms for
XML::Parser to set the handlers needed by XML::Parser::Expat. If neither
Style nor Handlers are specified, then parsing just checks the document for
being well-formed.
.
When underlying handlers get called, they receive as their first parameter
the Expat object, not the Parser object.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-Parser
Package: libxml-twig-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 552
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:3.52-1
Depends: perl:any, libxml-parser-perl
Recommends: libhtml-parser-perl, libtext-iconv-perl, libtie-ixhash-perl, libwww-perl, libxml-xpathengine-perl | libxml-xpath-perl
Suggests: libunicode-map8-perl, libunicode-string-perl, xml-twig-tools
Description: Perl module for processing huge XML documents in tree mode
The XML::Twig module provides a way to process XML documents. It is built on
top of XML::Parser.
.
The module offers a tree interface to the document, while allowing to
output the parts of it that have been completely processed.
.
It allows minimal resource (CPU and memory) usage by building the
tree only for the parts of the documents that need actual processing,
through the use of the twig_roots and twig_print_outside_roots
options. The finish and finish_print methods also help to increase
performance.
.
XML::Twig tries to make simple things easy so it tries its best to
takes care of a lot of the (usually) annoying (but sometimes
necessary) features that come with XML and XML::Parser.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-Twig
Package: libxml-xpathengine-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.14-1
Depends: perl
Description: re-usable XPath engine for DOM-like trees
XML::XPathEngine provides an XPath engine, that can be re-used by other
module/classes that implement trees.
.
In order to use the XPath engine, nodes in the user module need to mimic
DOM nodes. The degree of similarity between the user tree and a DOM dictates
how much of the XPath features can be used. A module implementing all of the
DOM should be able to use this module very easily (you might need to add
the cmp method on nodes in order to get ordered result sets).
.
This module is derived from Matt Sergeant's XML::XPath.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-XPathEngine
Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2097
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.9.13+dfsg-1ubuntu0.3
Depends: libc6 (>= 2.34), libicu70 (>= 70.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Conflicts: w3c-dtd-xhtml
Description: GNOME XML library
XML is a metalanguage to let you design your own markup language.
A regular markup language defines a way to describe information in
a certain class of documents (eg HTML). XML lets you define your
own customized markup languages for many classes of document. It
can do this because it's written in SGML, the international standard
metalanguage for markup languages.
.
This package provides a library providing an extensive API to handle
such XML data files.
Homepage: http://xmlsoft.org
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libxmlb2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmlb
Version: 0.3.6-2build1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.53.2), liblzma5 (>= 5.1.1alpha+20120614)
Description: Binary XML library
The libxmlb library takes XML source, and
converts it to a structured binary representation with a deduplicated string
table -- where the strings have the NULs included.
.
This allows an application to mmap the binary XML file, do an XPath query and
return some strings without actually parsing the entire document. This is all
done using (almost) zero allocations and no actual copying of the binary data.
Homepage: https://github.com/hughsie/libxmlb
Original-Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Package: libxmlsec1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 435
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libxml2 (>= 2.8.0), libxslt1.1 (>= 1.1.25)
Breaks: libreoffice-core (<< 1:6.0.5~rc2~)
Description: XML security library
The XML Security Library implements standards related to secure handling
of XML data.
.
This package provides dynamic libraries for use by applications.
Specifically, it provides all XML security library functionality
except for the cryptography engine.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libxmlsec1-openssl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), libxmlsec1 (>= 1.2.33)
Description: Openssl engine for the XML security library
The XML Security Library implements standards related to secure handling
of XML data.
.
This package provides dynamic libraries for use by applications.
Specifically, it provides the openssl implementation of the XML security
library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libxmu6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.3-3
Depends: libc6 (>= 2.14), libx11-6, libxext6, libxt6
Description: X11 miscellaneous utility library
libXmu provides a set of miscellaneous utility convenience functions for X
libraries to use. libXmuu is a lighter-weight version that does not depend
on libXt or libXext; for more information, see libxmuu1.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.3-3
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
libXmuu provides a set of miscellaneous utility convenience functions for X
libraries to use. It is a lighter version of libXmu that does not depend
on libXt or libXext; for more information on libXmu, see libxmu6.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.12-1ubuntu0.22.04.2
Depends: libc6 (>= 2.33), libx11-6
Description: X11 pixmap library
The X PixMap image format is an extension of the monochrome X BitMap
format specified in the X protocol, and is commonly used in traditional
X applications.
.
This package provides runtime support for XPM format.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrandr
Version: 2:1.5.2-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
libXrandr provides an X Window System client interface to the RandR
extension to the X protocol.
.
The RandR extension allows for run-time configuration of display attributes
such as resolution, rotation, and reflection.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXrandr
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1build4
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
The X Rendering Extension (Render) introduces digital image composition as
the foundation of a new rendering model within the X Window System.
Rendering geometric figures is accomplished by client-side tessellation into
either triangles or trapezoids. Text is drawn by loading glyphs into the
server and rendering sets of them. The Xrender library exposes this
extension to X clients.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXrender
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxshmfence1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxshmfence
Version: 1.3-1build4
Depends: libc6 (>= 2.27)
Description: X shared memory fences - shared library
This library provides an interface to shared-memory fences for
synchronization between the X server and direct-rendering clients.
.
This package contains the xshmfence shared library.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 499
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.34-4ubuntu0.22.04.1
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.9.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
XSLT is an XML language for defining transformations of XML files from
XML to some other arbitrary format, such as XML, HTML, plain text, etc.
using standard XSLT stylesheets. libxslt is a C library which
implements XSLT version 1.0.
.
This package contains the libxslt library used by applications for XSLT
transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libxss1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxss
Version: 1:1.2.3-1build2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common
Description: X11 Screen Saver extension library
libXss provides an X Window System client interface to the MIT-SCREEN-SAVER
extension to the X protocol.
.
The Screen Saver extension allows clients behaving as screen savers to
register themselves with the X server, to better integrate themselves with
the running session.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
https://gitlab.freedesktop.org/xorg/lib/libXScrnSaver
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxt6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 467
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1
Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6
Description: X11 toolkit intrinsics library
libXt provides the X Toolkit Intrinsics, an abstract widget library upon
which other toolkits are based. Xt is the basis for many toolkits, including
the Athena widgets (Xaw), and LessTif (a Motif implementation).
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.1
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.34)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
The iptables/xtables framework has been replaced by nftables. You should
consider migrating now.
.
This package contains the user-space interface to the Netfilter xtables
kernel framework.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libxtst6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxtst
Version: 2:1.2.3-1build4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, x11-common
Description: X11 Testing -- Record extension library
libXtst provides an X Window System client interface to the Record
extension to the X protocol.
.
The Record extension allows X clients to synthesise input events, which
is useful for automated testing.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXtst
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxv
Version: 2:1.0.11-1build2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Video extension library
libXv provides an X Window System client interface to the XVideo
extension to the X protocol.
.
The XVideo extension allows for accelerated drawing of videos. Hardware
adaptors are exposed to clients, which may draw in a number of colourspaces,
including YUV.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXv
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxxf86dga1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxxf86dga
Version: 2:1.1.5-0ubuntu3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Direct Graphics Access extension library
libXxf86dga provides the XFree86-DGA extension, which allows direct
graphics access to a framebuffer-like region, and also allows relative
mouse reporting, et al. It is mainly used by games and emulators for
games.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXxf86dga
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxxf86vm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxxf86vm
Version: 1:1.1.4-1build3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 XFree86 video mode extension library
libXxf86vm provides an interface to the XFree86-VidModeExtension
extension, which allows client applications to get and set video mode
timings in extensive detail. It is used by the xvidtune program in
particular.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxxhash0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.1-1
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
It successfully completes the SMHasher test suite which evaluates collision,
dispersion and randomness qualities of hash functions. Code is highly portable,
and hashes are identical on all platforms (little / big endian).
.
This package contains the shared library.
Original-Maintainer: Josue Ortega <josue@debian.org>
Homepage: https://cyan4973.github.io/xxHash
Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.2-1build2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
LibYAML is a C library for parsing and emitting data in YAML 1.1, a
human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>
Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.7.3-1ubuntu2
Depends: libbz2-1.0, libc6 (>= 2.33), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
libzip is a C library for reading, creating, and modifying zip archives. Files
can be added from data buffers, files, or compressed data copied directly from
other zip archives. Changes made without closing the archive can be reverted.
.
This package contains the files necessary for running applications that
use the libzip library.
Homepage: https://libzip.org
Original-Maintainer: Stefan Schörghofer <amd1212@4md.gr>
Package: libzstd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 846
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.4.8+dfsg-3build1
Depends: libc6 (>= 2.14)
Description: fast lossless compression algorithm
Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
real-time compression scenarios at zlib-level compression ratio.
.
This package contains the shared library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Package: linux-base
Status: install ok installed
Priority: important
Section: kernel
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.5ubuntu9
Depends: debconf (>= 0.5) | debconf-2.0
Conffiles:
/etc/kernel/postinst.d/xx-update-initrd-links b41c8cb1275704cf344e3e87c84633b2
Description: Linux image base package
This package contains files and support scripts for all Linux
images.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Package: linux-firmware
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 994367
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20220329.git681281e4-0ubuntu3.23
Replaces: atmel-firmware, linux-firmware-snapdragon (<= 1.2-0ubuntu1), linux-restricted-common
Provides: atmel-firmware
Recommends: firmware-sof-signed
Breaks: linux-firmware-raspi2 (<= 1.20190819-0ubuntu2), linux-firmware-snapdragon (<= 1.2-0ubuntu1)
Conflicts: atmel-firmware
Description: Firmware for Linux kernel drivers
This package provides firmware used by Linux kernel drivers.
Package: linux-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 20
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.89.86
Provides: kernel-testing--linux--full--generic, kernel-testing--linux--full--preferred
Depends: linux-image-generic (= 5.15.0.89.86), linux-headers-generic (= 5.15.0.89.86)
Description: Complete Generic Linux kernel and headers
This package will always depend on the latest complete generic Linux kernel
and headers.
Package: linux-headers-5.15.0-89
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 75889
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 5.15.0-89.99
Depends: coreutils
Description: Header files related to Linux kernel version 5.15.0
This package provides kernel header files for version 5.15.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-5.15.0-89/debian.README.gz for details
Package: linux-headers-5.15.0-89-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 24297
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-89.99
Provides: linux-headers, linux-headers-3.0
Depends: linux-headers-5.15.0-89, libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.2.3.3)
Description: Linux kernel headers for version 5.15.0 on 64 bit x86 SMP
This package provides kernel header files for version 5.15.0 on
64 bit x86 SMP.
.
This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-5.15.0-89/debian.README.gz for details.
Package: linux-headers-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 20
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.89.86
Depends: linux-headers-5.15.0-89-generic
Description: Generic Linux kernel headers
This package will always depend on the latest generic kernel headers
available.
Package: linux-image-4.15.0-213-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 8304
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 4.15.0-213.224
Config-Version: 4.15.0-213.224
Provides: aufs-dkms, fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-4.15.0-213-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc-4.15.0 | linux-source-4.15.0, linux-tools, linux-headers-4.15.0-213-generic
Conflicts: linux-image-unsigned-4.15.0-213-generic
Description: Signed kernel image generic
A kernel image for generic. This version of it is signed with
Canonical's signing key.
Built-Using: linux (= 4.15.0-213.224)
Package: linux-image-4.4.0-116-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65942
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.4.0-116.140
Config-Version: 4.4.0-116.140
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, virtualbox-guest-modules, zfs-dkms
Depends: kmod
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc-4.4.0 | linux-source-4.4.0, linux-tools, linux-headers-4.4.0-116-generic
Description: Linux kernel image for version 4.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 4.4.0 on
64 bit x86 SMP.
.
Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.15.0-89-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11382
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-89.99
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-89-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-89-generic, linux-modules-extra-5.15.0-89-generic
Conflicts: linux-image-unsigned-5.15.0-89-generic
Description: Signed kernel image generic
A kernel image for generic. This version of it is signed with
Canonical's signing key.
Built-Using: linux (= 5.15.0-89.99)
Package: linux-image-5.4.0-167-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 13390
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.4.0-167.184
Provides: aufs-dkms, fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, virtualbox-guest-dkms, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-167-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.4.0, linux-tools, linux-headers-5.4.0-167-generic
Conflicts: linux-image-unsigned-5.4.0-167-generic
Description: Signed kernel image generic
A kernel image for generic. This version of it is signed with
Canonical's signing key.
Built-Using: linux (= 5.4.0-167.184)
Package: linux-image-extra-4.4.0-116-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 151521
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.4.0-116.140
Config-Version: 4.4.0-116.140
Depends: linux-image-4.4.0-116-generic, crda | wireless-crda
Description: Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
This package contains the Linux kernel extra modules for version 4.4.0 on
64 bit x86 SMP.
.
Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 20
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.89.86
Provides: spl-modules (= 2.1.5-1ubuntu6~22.04.1), v4l2loopback-modules (= 0.12.7-2ubuntu2~22.04.1), virtualbox-guest-modules (= 5.15.0-89), wireguard-modules (= 1.0.0), zfs-modules (= 2.1.5-1ubuntu6~22.04.1)
Depends: linux-image-5.15.0-89-generic, linux-modules-extra-5.15.0-89-generic, linux-firmware, intel-microcode, amd64-microcode
Recommends: thermald
Description: Generic Linux kernel image
This package will always depend on the latest generic kernel image
available.
Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 6888
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 5.15.0-107.117
Replaces: linux-kernel-headers
Provides: aufs-dev, linux-kernel-headers
Conflicts: linux-kernel-headers
Description: Linux Kernel Headers for development
This package provides headers from the Linux kernel. These headers
are used by the installed headers for GNU glibc and other system
libraries. They are NOT meant to be used to build third-party modules for
your kernel. Use linux-headers-* packages for that.
Package: linux-modules-4.15.0-213-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 68317
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.15.0-213.224
Config-Version: 4.15.0-213.224
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-4.4.0-210-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 58989
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.4.0-210.242
Config-Version: 4.4.0-210.242
Description: Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.15.0-89-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 111888
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-89.99
Depends: linux-image-5.15.0-89-generic | linux-image-unsigned-5.15.0-89-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.4.0-167-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 76782
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-167.184
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-extra-4.15.0-213-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 177563
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.15.0-213.224
Config-Version: 4.15.0-213.224
Depends: linux-image-4.15.0-213-generic | linux-image-unsigned-4.15.0-213-generic, crda | wireless-crda
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
This package contains the Linux kernel extra modules for version 4.15.0 on
64 bit x86 SMP.
.
Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-extra-5.15.0-89-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 344590
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-89.99
Depends: linux-image-5.15.0-89-generic | linux-image-unsigned-5.15.0-89-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
This package contains the Linux kernel extra modules for version 5.15.0 on
64 bit x86 SMP.
.
Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-extra-5.4.0-167-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 196809
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-167.184
Config-Version: 5.4.0-167.184
Depends: linux-image-5.4.0-167-generic | linux-image-unsigned-5.4.0-167-generic, crda | wireless-crda
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel extra modules for version 5.4.0 on
64 bit x86 SMP.
.
Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports Generic processors.
.
Geared toward desktop and server systems.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: locales
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 17064
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: glibc
Version: 2.35-0ubuntu3.4
Depends: libc-bin (>> 2.35), debconf (>= 0.5) | debconf-2.0
Conffiles:
/etc/locale.alias 4a3f5ef911616822ec6fe04e31930bbf
Description: GNU C Library: National Language (locale) data [support]
Machine-readable data files, shared objects and programs used by the
C library for localization (l10n) and internationalization (i18n) support.
.
This package contains tools to generate locale definitions from source
files (included in this package). It allows you to customize which
definitions actually get generated. This is a space-saver over how this
package used to be, with all locales generated by default. This created
a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 888
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.8.1-2ubuntu2.1
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Breaks: util-linux (<< 2.32-0.2~)
Conflicts: python-4suite (<< 0.99cvs20060405-1)
Conffiles:
/etc/login.defs 905e8b2d452e98ee5d9ac93adfcfdc8b
/etc/pam.d/login 5afbc06eb5f71fef25170cf3c936a442
Description: system login tools
This package provides some required infrastructure for logins and for
changing effective user or group IDs, including:
* login, the program that invokes a user shell on a virtual terminal;
* nologin, a dummy shell for disabled user accounts;
* su, a basic tool for executing commands as root or another user.
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 167
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.19.0-1ubuntu1.1
Depends: cron | anacron | cron-daemon | systemd-sysv, libacl1 (>= 2.2.23), libc6 (>= 2.34), libpopt0 (>= 1.14), libselinux1 (>= 3.1~)
Suggests: bsd-mailx | mailx
Conffiles:
/etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171
/etc/logrotate.conf b0a820970ecd7412a334ade9c98de3f6
/etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44
/etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540
Description: Log rotation utility
The logrotate utility is designed to simplify the administration of
log files on a system which generates a lot of log files. Logrotate
allows for the automatic rotation compression, removal and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly or when the log file gets to a certain size. Normally, logrotate
runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate
Original-Maintainer: Christian Göttsche <cgzones@googlemail.com>
Package: logsave
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.1
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
The logsave program will execute cmd_prog with the specified
argument(s), and save a copy of its output to logfile. If the
containing directory for logfile does not exist, logsave will
accumulate the output in memory until it can be written out. A copy
of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 11.1.0ubuntu4
Description: Linux Standard Base init script functionality
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
This package only includes the init-functions shell library, which
may be used by other packages' initialization scripts for console
logging and other purposes.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Package: lsb-release
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 11.1.0ubuntu4
Depends: python3:any, distro-info-data
Recommends: apt
Description: Linux Standard Base version reporting utility
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
The lsb-release command is a simple tool to help identify the Linux
distribution being used and its compliance with the Linux Standard Base.
LSB conformance will not be reported unless the required metapackages are
installed.
.
While it is intended for use by LSB packages, this command may also
be useful for programmatically distinguishing between a pure Debian
installation and derived distributions.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Package: lshw
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 921
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 02.19.git.2021.06.19.996aaad9c7-2build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Recommends: pci.ids, usb.ids
Description: information about hardware configuration
A small tool to provide detailed information on the hardware
configuration of the machine. It can report exact memory
configuration, firmware version, mainboard configuration, CPU version
and speed, cache configuration, bus speed, etc. on DMI-capable x86
systems, on some PowerPC machines (PowerMac G4 is known to work) and AMD64.
.
Information can be output in plain text, HTML or XML.
Homepage: https://github.com/lyonel/lshw
Original-Maintainer: Ghe Rivero <ghe@debian.org>
Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 447
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.93.2+dfsg-1.1build2
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2)
Suggests: perl
Description: utility to list open files
Lsof is a Unix-specific diagnostic tool. Its name stands
for LiSt Open Files, and it does just that. It lists
information about any files that are open, by processes
currently running on the system.
Homepage: https://github.com/lsof-org/lsof
Original-Maintainer: Andres Salomon <dilinger@debian.org>
Package: lto-disabled-list
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 39
Maintainer: Matthias Klose <doko@ubuntu.com>
Architecture: all
Version: 24
Description: list of packages not to build with LTO
A list of source packages not to build with link time
optimization (LTO).
.
Entries in this list should have a bug report filed with
the (user) tag 'lto'.
Package: ltrace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.7.3-6.1ubuntu6
Depends: libc6 (>= 2.34), libelf1 (>= 0.131), libselinux1 (>= 3.1~)
Conffiles:
/etc/ltrace.conf f67e1097893416df68c30b65ed908992
Description: Tracks runtime library calls in dynamically linked programs
ltrace is a debugging program which runs a specified command until it
exits. While the command is executing, ltrace intercepts and records
the dynamic library calls which are called by
the executed process and the signals received by that process.
It can also intercept and print the system calls executed by the program.
.
The program to be traced need not be recompiled for this, so you can
use it on binaries for which you don't have the source handy.
.
You should install ltrace if you need a sysadmin tool for tracking the
execution of processes.
Original-Maintainer: Juan Cespedes <cespedes@debian.org>
Package: lua-bitop
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.0.2-5
Replaces: liblua5.1-bitop0 (<< 1.0.1-6~)
Provides: liblua5.1-bitop0, lua5.1-bitop, lua5.2-bitop
Depends: libc6 (>= 2.4)
Breaks: liblua5.1-bitop0 (<< 1.0.1-6~)
Description: fast bit manipulation library for the Lua language
This package contains the Lua bitop fast bit manipulation library.
Original-Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Homepage: http://bitop.luajit.org
Lua-Versions: 5.1 5.2
Package: lua-cjson
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.1.0+dfsg-2.1
Provides: lua5.1-cjson, lua5.2-cjson
Depends: libc6 (>= 2.14)
Description: JSON parser/encoder for Lua
This library allows you to easily convert Lua values to JSON strings and back.
Features:
* Fast, standards compliant encoding/parsing routines
* Full support for JSON with UTF-8, including decoding surrogate pairs
* Optional run-time support for common exceptions to the JSON
specification (infinity, NaN,..)
* No dependencies on other libraries
Original-Maintainer: The Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Homepage: http://www.kyne.com.au/~mark/software/lua-cjson.php
Lua-Versions: 5.1 5.2
Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4032
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.03.11-2.1ubuntu4
Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.74), libedit2 (>= 2.11-20080614-0), libselinux1 (>= 3.1~), libsystemd0 (>= 222), libudev1 (>= 183), lsb-base, dmsetup (>= 2:1.02.175-2.1ubuntu4~), dmeventd (>= 2:1.02.175-2.1ubuntu4~)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: thin-provisioning-tools
Conffiles:
/etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
/etc/init.d/lvm2-lvmpolld 6ee7740a641d91e302d3fbfe42a14942
/etc/lvm/lvm.conf ab4fc5f2986ceaade6a005f65f23dc26
/etc/lvm/lvmlocal.conf eeccf159eb1e1af87ca0c141235822b2
/etc/lvm/profile/cache-mq.profile 9df1883c03bac9d3041e75745cb5e0ec
/etc/lvm/profile/cache-smq.profile d27b7f0947c6ac21944c05e6098b9850
/etc/lvm/profile/command_profile_template.profile 3bab119bec857c31a53725da2d0a9408
/etc/lvm/profile/lvmdbusd.profile ffa904d375ce53ebb6befe7d65cf391a
/etc/lvm/profile/metadata_profile_template.profile bccbaf503cb8f0adb5b4f841f7c1f735
/etc/lvm/profile/thin-generic.profile f57ede2b5b249024766c51a223e15ed5
/etc/lvm/profile/thin-performance.profile f4de81439550553043e04f019a48a827
/etc/lvm/profile/vdo-small.profile da26d10e71e517a6f02ff0d53395e3c9
Description: Linux Logical Volume Manager
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: lxc-common
Status: deinstall ok config-files
Priority: optional
Section: admin
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 2.0.11-0ubuntu1~16.04.3
Config-Version: 2.0.11-0ubuntu1~16.04.3
Replaces: lxc (<< 2.0.0~rc2-0ubuntu1~)
Depends: liblxc1 (= 2.0.11-0ubuntu1~16.04.3), apparmor (>= 2.8.96~2652-0ubuntu1), libc6 (>= 2.17)
Breaks: lxc (<< 2.0.0~rc2-0ubuntu1~)
Conffiles:
/etc/apparmor.d/abstractions/lxc/container-base ebe5b2890dfe8e4185bf78775ad3dae3 obsolete
/etc/apparmor.d/abstractions/lxc/start-container 973416595c14f123a57916f8bf81d5ae obsolete
/etc/apparmor.d/lxc-containers 78fd8b29fb81887bdab6313b3f5e6b3d obsolete
/etc/apparmor.d/lxc/lxc-default eae02786d40a1ff7d317362d181f6eee obsolete
/etc/apparmor.d/lxc/lxc-default-cgns 128c9d5468f16fdbd41033393c03b104 obsolete
/etc/apparmor.d/lxc/lxc-default-with-mounting 5e239a4100457fc09b4f02327283259d obsolete
/etc/apparmor.d/lxc/lxc-default-with-nesting 0bbb509f3cb98028c754b9a3eb84d556 obsolete
/etc/apparmor.d/usr.bin.lxc-start e3822e488353a11a11387a4b3a3132b2 obsolete
Description: Linux Containers userspace tools (common tools)
Containers are insulated areas inside a system, which have their own namespace
for filesystem, network, PID, IPC, CPU and memory allocation and which can be
created using the Control Group and Namespace features included in the Linux
kernel.
.
This package contains a few binaries and security profiles required by
all liblxc1 users.
Homepage: https://linuxcontainers.org
Package: lxcfs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.0.0-0ubuntu2
Depends: lsb-base (>= 3.0-6), libc6 (>= 2.34), libfuse2 (>= 2.8), libgcc-s1 (>= 3.3.1)
Conffiles:
/etc/init.d/lxcfs 0fa2c481659be41cde61aff18a7b899e obsolete
Description: FUSE based filesystem for LXC
LXCFS provides a FUSE based filesystem to improve the LXC experience
within the containers.
.
This filesystem offers both a cgroupfs-like view for use by
unprivileged containers which wouldn't otherwise be allowed to mount
cgroupfs. And a set of files that are meant to be bind-mounted over
their /proc equivalent to make them cgroup-aware.
Homepage: https://linuxcontainers.org
Original-Maintainer: pkg-lxc <pkg-lxc-devel@lists.alioth.debian.org>
Package: lxd
Status: deinstall ok config-files
Priority: optional
Section: oldlibs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:0.10
Config-Version: 1:0.10
Replaces: lxd-client (<< 1:0.0~), lxd-tools (<< 1:0.0~)
Depends: debconf (>= 0.5) | debconf-2.0
Pre-Depends: debconf, snapd
Breaks: lxd-client (<< 1:0.0~), lxd-tools (<< 1:0.0~)
Description: Transitional package - lxd -> snap (lxd)
This is a transitional dummy package. It can safely be removed.
.
lxd is now replaced by the LXD snap.
Homepage: https://linuxcontainers.org/
Package: lxd-agent-loader
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 24
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.5
Description: LXD - VM agent loader
The LXD VM agent enables access to advanced LXD features such as file
transfer and command spawning inside virtual machines run by LXD.
.
This package contains init scripts that will automatically load the
agent and run it when started in a LXD VM.
Homepage: https://linuxcontainers.org/
Package: mailcap
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.70+nmu1ubuntu1
Replaces: mime-support (<< 3.65)
Provides: run-mailcap
Depends: perl, media-types
Recommends: bzip2, file, xz-utils
Breaks: mime-support (<< 3.65)
Conffiles:
/etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: Debian's mailcap system, and support programs
The mailcap system associates media types with programs that can handle them,
using system and user configuration files. A file's media type is determined
by its extension or by running the "file" command if available.
.
Other packages register their programs as viewers/editors/composers/etc by
placing mailcap entry files or FreeDesktop menu entries in predetermined
directories monitored by this package's dpkg triggers.
.
This package provides a "run-mailcap" program to open arbitrary files, and in
addition the "see", "edit", "compose", and "print" aliases to display, alter,
create, and print (respectively).
.
This package also provides the "debian-view" utility to handle Debian packages
interactively.
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 416
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.3-4.1build1
Replaces: make-guile
Depends: libc6 (>= 2.34)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
GNU Make is a utility which controls the generation of executables
and other target files of a program from the program's source
files. It determines automatically which pieces of a large program
need to be (re)created, and issues the commands to (re)create
them. Make can be used to organize any task in which targets (files)
are to be automatically updated based on input files whenever the
corresponding input is newer --- it is not limited to building
computer programs. Indeed, Make is a general purpose dependency
solver.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>
Homepage: https://www.gnu.org/software/make/
Package: makedev
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-95
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
The MAKEDEV executable is used to create device files, often in /dev.
.
Device files are special files through which applications can interact
with hardware.
.
This package is not necessary for most modern Linux systems, where the udev
subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2824
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.10.2-1
Replaces: man, nlsutils
Provides: man, man-browser
Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgdbm6 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Suggests: apparmor, groff, less, www-browser
Conflicts: man
Conffiles:
/etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b
/etc/cron.daily/man-db 857c7372869b8f2105d316c606472d24
/etc/cron.weekly/man-db 7d3f58916b8a9840cd602991375e7781
/etc/manpath.config 77d8f48dc5c371248a79d1add5a68707
Description: tools for reading manual pages
This package provides the man command, the primary way of examining the
system help files (manual pages). Other utilities provided include the
whatis and apropos commands for searching the manual page database, the
manpath utility for determining the manual page search path, and the
maintenance utilities mandb, catman and zsoelim. man-db uses the groff
suite of programs to format and display the manual pages.
Homepage: https://nongnu.org/man-db/
Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1669
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.10-1ubuntu1
Replaces: attr (<< 1:2.4.47-3), keyutils (<< 1.6-1), manpages-dev (<< 5.09-2)
Suggests: man-browser
Breaks: attr (<< 1:2.4.47-3), keyutils (<< 1.6-1), manpages-dev (<< 5.09-2)
Description: Manual pages about using a GNU/Linux system
This package contains GNU/Linux manual pages for these sections:
4 = Devices (e.g. hd, sd).
5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
.
Sections 1, 6 and 8 are provided by the respective applications. This
package only includes the intro man page describing the section.
.
The man pages describe syntaxes of several system files.
Homepage: https://www.kernel.org/doc/man-pages/
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3942
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 5.10-1ubuntu1
Replaces: libattr1-dev (<< 1:2.4.47-3), libbsd-dev (<< 0.8.4-1)
Depends: manpages
Suggests: man-browser
Breaks: libattr1-dev (<< 1:2.4.47-3), libbsd-dev (<< 0.8.4-1), manpages (<< 5.09-2)
Description: Manual pages about using GNU/Linux for development
These man pages describe the Linux programming interface, including
these two sections:
2 = Linux system calls.
3 = Library calls (note that a more comprehensive source of information
may be found in the glibc-doc and glibc-doc-reference packages).
Homepage: https://www.kernel.org/doc/man-pages/
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Package: mawk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20200120-3
Provides: awk
Depends: libc6 (>= 2.34)
Description: Pattern scanning and text processing language
Mawk is an interpreter for the AWK Programming Language. The AWK
language is useful for manipulation of data files, text retrieval and
processing, and for prototyping and experimenting with algorithms. Mawk
is a new awk meaning it implements the AWK language as defined in Aho,
Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
to the POSIX 1003.2 (draft 11.3) definition of the AWK language
which contains a few features not described in the AWK book, and mawk
provides a small number of extensions.
.
Mawk is smaller and much faster than gawk. It has some compile-time
limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Boyuan Yang <byang@debian.org>
Homepage: https://invisible-island.net/mawk/
Package: mdadm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2-0ubuntu2
Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libudev1 (>= 183), debconf, lsb-base, udev
Recommends: finalrd (>= 3~), kmod | module-init-tools
Suggests: default-mta | mail-transport-agent, dracut-core
Conffiles:
/etc/logcheck/ignore.d.server/mdadm 5eeaf5c5c7dc0291a986e43004dfd495
/etc/logcheck/violations.d/mdadm efd87cec251921ce0642171eae5f3b73
/etc/modprobe.d/mdadm.conf d3be82c0f275d6c25b04d388baf9e836
Description: Tool to administer Linux MD arrays (software RAID)
The mdadm utility can be used to create, manage, and monitor MD
(multi-disk) arrays for software RAID or multipath I/O.
.
This package automatically configures mdadm to assemble arrays during the
system startup process. If not needed, this functionality can be disabled.
Homepage: http://neil.brown.name/blog/mdadm
Original-Maintainer: Felix Lechner <felix.lechner@lease-up.com>
Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 7.0.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
/etc/mime.types 2e5f0c27e65400ea230c8a94be277b86
Description: List of standard media types and their usual file extension
This package installs the configuration file /etc/mime.types, that lists
standard media types (originally known as "MIME" types) and their usual file
extension. This provides a simple way for programs to have a first guess at a
file's content. On standard Debian desktop systems, one will also find more
sophisticated tools, for instance provided by the "file" and "xdg-utils"
packages.
.
The /etc/mime.types file is compiled by hand using mostly information provided
by the Internet Assigned Numbers Authority (IANA).
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Package: mime-support
Status: install ok installed
Priority: important
Section: net
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.66
Depends: mailcap, media-types
Conffiles:
/etc/mime.types f4631d08bcc92bf2dde274696d7b4b35 obsolete
/etc/mailcap.order ba07e08a7fe3741d0b8339127963190e obsolete
Description: transitional package
This is a transitional package. It will be possible to remove it
safely once its dependency chain has adjusted to depend on mailcap
or media-types directly.
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Package: mlocate
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 15
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: plocate
Version: 1.1.15-1ubuntu2
Depends: plocate
Conffiles:
/etc/updatedb.conf 4391971a02f16b6b565805799f77dbec obsolete
Description: transitional dummy package
This is a transitional dummy package to plocate, it can be safely removed.
Command-line options should generally be the same, so you can continue to
use the locate(1) command as before with no ill effects.
Homepage: https://plocate.sesse.net/
Original-Maintainer: Steinar H. Gunderson <sesse@debian.org>
Package: modemmanager
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 4708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.20.0-1~ubuntu22.04.2
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.56.0), libgudev-1.0-0 (>= 232), libmbim-glib4 (>= 1.28.0), libmbim-proxy, libmm-glib0 (>= 1.19~git20220825), libpolkit-gobject-1-0 (>= 0.99), libqmi-glib5 (>= 1.32.0), libqmi-proxy, libsystemd0 (>= 209), policykit-1
Recommends: usb-modeswitch
Conffiles:
/etc/dbus-1/system.d/org.freedesktop.ModemManager1.conf b34f558232938aad76d7b38fd94aaa61
Description: D-Bus service for managing modems
ModemManager is a DBus-activated daemon which controls mobile broadband
(2G/3G/4G/5G) devices and connections. Whether built-in devices, USB dongles,
Bluetooth-paired telephones or professional RS232/USB devices with external
power supplies, ModemManager is able to prepare and configure the modems and
setup connections with them.
Homepage: https://www.freedesktop.org/wiki/Software/ModemManager/
Original-Maintainer: DebianOnMobile Maintainers <debian-on-mobile-maintainers@alioth-lists.debian.net>
Package: monitoring-plugins
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3.1-1ubuntu4
Provides: nagios-plugins
Depends: monitoring-plugins-basic, monitoring-plugins-standard
Suggests: icinga2, nagios-plugins-contrib
Description: Plugins for nagios compatible monitoring systems (metapackage)
Plugins for nagios compatible monitoring systems like Naemon and Icinga.
.
This metapackage will install the entire suite of plugins for nagios
compatible monitoring systems.
If you are installing monitoring plugins on a remote "satellite" server
(using nagios-nrpe-server or nsca), you may be interested in the
monitoring-plugins-basic package.
Homepage: https://www.monitoring-plugins.org
Original-Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
Package: monitoring-plugins-basic
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1386
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: monitoring-plugins
Version: 2.3.1-1ubuntu4
Provides: nagios-plugins-basic
Depends: iputils-ping, monitoring-plugins-common, procps, ucf, libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Recommends: libcap2-bin
Suggests: icinga2
Description: Plugins for nagios compatible monitoring systems (basic)
Plugins for nagios compatible monitoring systems like Naemon and Icinga. It
contains the following plugins:
.
check_apt, check_by_ssh, check_clamd, check_cluster,
check_dhcp, check_disk, check_dummy, check_file_age,
check_ftp, check_host, check_http, check_icmp,
check_ide_smart, check_imap, check_ircd, check_jabber,
check_load, check_log, check_mrtg, check_mrtgtraf,
check_nagios, check_nntp, check_nntps, check_nt,
check_ntp, check_ntp_peer, check_ntp_time, check_nwstat,
check_overcr, check_ping, check_pop, check_procs,
check_real, check_rta_multi, check_sensors, check_simap,
check_smtp, check_spop, check_ssh, check_ssmtp,
check_swap, check_tcp, check_time, check_udp,
check_ups, check_users
.
This package provides a basic set of plugins with minimal external
dependencies. It is not likely to be useful by itself unless you are
using a remote "satellite" system (using nagios-nrpe-server, check_by_ssh or
nsca, for example).
Homepage: https://www.monitoring-plugins.org
Original-Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
Package: monitoring-plugins-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: monitoring-plugins
Version: 2.3.1-1ubuntu4
Depends: ucf, libc6 (>= 2.34)
Suggests: icinga2
Description: Common files for plugins for nagios compatible monitoring
Common files for plugins for nagios compatible monitoring systems like Naemon
and Icinga.
.
This package contains common files which maybe needed for plugins.
Homepage: https://www.monitoring-plugins.org
Original-Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
Package: monitoring-plugins-standard
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 751
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: monitoring-plugins
Version: 2.3.1-1ubuntu4
Provides: nagios-plugins-standard
Depends: monitoring-plugins-basic, ucf, libc6 (>= 2.34)
Recommends: bind9-host | host, dnsutils, libnet-snmp-perl, rpcbind, smbclient, snmp, sudo, libcurl4 (>= 7.16.2), libdbi1 (>= 0.8.4), libldap-2.5-0 (>= 2.5.4), libmysqlclient21 (>= 8.0.11), libpq5, libradcli4 (>= 1.2.11), libssl3 (>= 3.0.0~~alpha1), liburiparser1 (>= 0.6.0)
Suggests: fping, icinga2, postfix | sendmail-bin | exim4-daemon-heavy | exim4-daemon-light, qstat
Description: Plugins for nagios compatible monitoring systems (standard)
Plugins for nagios compatible monitoring systems like Naemon and Icinga. It
contains the following plugins:
.
check_breeze, check_dbi, check_dig, check_disk_smb, check_dns,
check_flexlm, check_fping, check_game, check_hpjd, check_ifoperstatus,
check_ifstatus, check_ldap, check_ldaps, check_mailq, check_mysql,
check_mysql_query, check_oracle, check_pgsql, check_radius, check_rpc,
check_snmp, check_wave
.
This package provides the suite of plugins that are most likely to be
useful on a central monitoring host. Some scripts need more packages installed
to work, which is implemented as recommends.
Homepage: https://www.monitoring-plugins.org
Original-Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
Package: motd-news-config
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: base-files
Version: 12ubuntu4.4
Replaces: base-files (<< 11ubuntu11)
Breaks: base-files (<< 11ubuntu11)
Conffiles:
/etc/default/motd-news c08a329a603b640095da5ffe4e73491c
Description: Configuration for motd-news shipped in base-files
This package contains the configuration read by the motd-news script
shipped in the base-files package.
.
Install this package if you want motd-news to be enabled.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libmount1 (>= 2.37.2), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.33)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
This package provides the mount(8), umount(8), swapon(8),
swapoff(8), and losetup(8) commands.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: mtr-tiny
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mtr
Version: 0.95-1
Replaces: mtr
Depends: libc6 (>= 2.34), libjansson4 (>= 2.0.1), libncurses6 (>= 6), libtinfo6 (>= 6)
Breaks: mtr, suidmanager (<< 0.50)
Description: Full screen ncurses traceroute tool
mtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence of ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.
.
mtr-tiny is compiled without support for X and conserves disk space.
Original-Maintainer: Robert Woodcock <rcw@debian.org>
Homepage: https://www.bitwizard.nl/mtr/
Package: multipath-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.8.8-1ubuntu1.22.04.3
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.110), libjson-c5 (>= 0.15), libreadline8 (>= 6.0), libsystemd0, libudev1 (>= 183), liburcu8 (>= 0.13.0), udev, kpartx (>= 0.8.8-1ubuntu1.22.04.3), lsb-base, sg3-utils-udev
Suggests: multipath-tools-boot
Conffiles:
/etc/multipath.conf a14f69c91f2ba59a279ac6018d23d28b
Description: maintain multipath block device access
These tools are in charge of maintaining the disk multipath device maps and
react to path and map events.
.
If you install this package you may have to change the way you address block
devices. See README.Debian for details.
Homepage: http://christophe.varoqui.free.fr/
Original-Maintainer: Debian DM Multipath Team <team+linux-blocks@tracker.debian.org>
Package: mysql-apt-config
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 35
Maintainer: MySQL Release Engineering <mysql-build@oss.oracle.com>
Architecture: all
Version: 0.8.12-1
Pre-Depends: debconf (>= 0.2.17), dpkg (>= 1.15), lsb-release, wget, bash (>= 4.0), gnupg
Description: Auto configuration for MySQL APT Repo.
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
Homepage: http://dev.mysql.com/
Package: mysql-common
Status: deinstall ok config-files
Priority: optional
Section: database
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.0.8)
Version: 5.8+1.0.8
Config-Version: 5.8+1.0.8
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
/etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
/etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
/etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
.
This package includes files needed by all versions of the client library,
e.g. /etc/mysql/my.cnf.
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Package: mysql-community-client
Status: deinstall ok config-files
Priority: optional
Section: database
Installed-Size: 64689
Maintainer: MySQL Release Engineering <mysql-build@oss.oracle.com>
Architecture: amd64
Source: mysql-community
Version: 5.7.25-1ubuntu16.04
Config-Version: 5.7.25-1ubuntu16.04
Replaces: libmysqlclient-dev (<< 5.7.14), mysql, mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-core-5.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-cluster-commercial-client, mysql-cluster-community-client, mysql-commercial-client, mysql-common (<< 5.7.17)
Provides: virtual-mysql-client, virtual-mysql-client-core
Depends: mysql-common (>= 5.7.25-1ubuntu16.04), libaio1 (>= 0.3.93), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libnuma1, libstdc++6 (>= 5.2), libtinfo5 (>= 6)
Breaks: libmysqlclient-dev (<< 5.7.14), mysql-common (<< 5.7.17)
Conflicts: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-5.5, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-5.5, mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-5.5, mysql, mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-core-5.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-cluster-commercial-client, mysql-cluster-community-client, mysql-commercial-client, mysql-server-5.0, mysql-server-5.1, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-core-5.0, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7
Conffiles:
/usr/share/mysql/charsets/armscii8.xml e545213552a8360228b660148aa75749
/usr/share/mysql/charsets/ascii.xml 0341891836f349a5fea11c2adefa084c
/usr/share/mysql/charsets/cp1250.xml 1db9bc60bcb9e4ddbdddbcc9ffa367f4
/usr/share/mysql/charsets/cp1251.xml 1709bcce176827e845d0ebe4ddf7edf7
/usr/share/mysql/charsets/cp1256.xml 4dea2ece265a7d869f2a28f35535bda1
/usr/share/mysql/charsets/cp1257.xml 4dccae1e3937e0f2b4f0939d230599d8
/usr/share/mysql/charsets/cp850.xml 4a249e6ff67756da15ed11655963cbd5
/usr/share/mysql/charsets/cp852.xml 0bb4358c44478f48766aeebd9699cc34
/usr/share/mysql/charsets/cp866.xml 5772ac605de1c9754f69e3f8283eff5d
/usr/share/mysql/charsets/dec8.xml a2b6d496839383ba52e33c4ddb0c041e
/usr/share/mysql/charsets/geostd8.xml fd3da1dd850af6aa1b5262de00ebbf92
/usr/share/mysql/charsets/greek.xml 77f2ffa5a628a5c09fbc2ba4ba5c891d
/usr/share/mysql/charsets/hebrew.xml 3df5fcbbc4ddd878598595bc6b38dcb5
/usr/share/mysql/charsets/hp8.xml 72c1d6575f0e5435ab1f43eea984dbae
/usr/share/mysql/charsets/Index.xml 7aebe32c3d5d6f0f881b33ccada30cad
/usr/share/mysql/charsets/keybcs2.xml 8bc93cf794c9afc1ea7215947bc5666d
/usr/share/mysql/charsets/koi8r.xml 2f3a243827515c95279f3fc610f870d8
/usr/share/mysql/charsets/koi8u.xml fafffc8189cc20e26a8e9d7096dc78fd
/usr/share/mysql/charsets/latin1.xml 8d48e680084df3bc439f074a31ec49ae
/usr/share/mysql/charsets/latin2.xml 6ca0fc862d4102cf60c4201b7fee22f5
/usr/share/mysql/charsets/latin5.xml 3324f4277a35aa3bf1fb0f9103d33c58
/usr/share/mysql/charsets/latin7.xml 7892d703e808e9a1d2701f4c02105c5f
/usr/share/mysql/charsets/macce.xml 921a65c7d1297a9444648a22d4bec166
/usr/share/mysql/charsets/macroman.xml 7b206b348ae1a72487306a795a0abd98
/usr/share/mysql/charsets/swe7.xml 6eb6e60f23a83566eb13987e94077a9e
Description: MySQL Client
The MySQL(TM) software delivers a very fast, multi-threaded, multi-user,
and robust SQL (Structured Query Language) database server. MySQL Server
is intended for mission-critical, heavy-load production systems as well
as for embedding into mass-deployed software. MySQL is a trademark of
Oracle. This package contains the standard MySQL clients and
administration tools.
Homepage: http://www.mysql.com/
Package: nagios-nrpe-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 466
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: nagios-nrpe
Version: 4.0.3-1ubuntu2
Depends: lsb-base, libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), libwrap0 (>= 7.6-4~)
Pre-Depends: adduser
Recommends: monitoring-plugins-basic | monitoring-plugins
Suggests: xinetd | inetd
Conflicts: nagios-nrpe-doc
Conffiles:
/etc/default/nagios-nrpe-server 6aba3e540e38900a23de74d58efb0c3f
/etc/init.d/nagios-nrpe-server 3b840c92fa91a15b10de158b8fdd49e3
/etc/nagios/nrpe.cfg d4ae02c4b4addfa65b62b4ef51000787
/etc/nagios/nrpe_local.cfg 19c1c67393a0b6002f4595b535c71cc2
Description: Nagios Remote Plugin Executor Server
Nagios is a host/service/network monitoring and management system.
.
The purpose of this addon is to allow you to execute Nagios plugins on a
remote host in as transparent a manner as possible.
.
This program runs as a background process on the remote host and processes
command execution requests from the check_nrpe plugin on the Nagios host.
Homepage: https://github.com/NagiosEnterprises/nrpe
Original-Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 6.2-1
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
/etc/nanorc b2c34817282284614d58163ef56df0d9
Description: small, friendly text editor inspired by Pico
GNU nano is an easy-to-use text editor originally designed as a replacement
for Pico, the ncurses-based editor from the non-free mailer package Pine
(itself now available under the Apache License as Alpine).
.
However, GNU nano also implements many features missing in Pico, including:
- undo/redo
- line numbering
- syntax coloring
- soft-wrapping of overlong lines
- selecting text by holding Shift
- interactive search and replace (with regular expression support)
- a go-to line (and column) command
- support for multiple file buffers
- auto-indentation
- tab completion of filenames and search terms
- toggling features while running
- and full internationalization support
Original-Maintainer: Jordi Mallach <jordi@debian.org>
Homepage: https://www.nano-editor.org/
Package: ncal
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: bsdmainutils
Version: 12.1.7+nmu3ubuntu2
Replaces: bsdmainutils (<< 12.1.3)
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3)
Description: display a calendar and the date of Easter
This package contains the "ncal" program and the traditional "cal"
program, both are commonly found on BSD-style systems. This utility displays a
simple calendar in a traditional or an alternative and more advanced layout,
and the date of Easter.
Original-Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Provides: ncurses-runtime
Breaks: bash-static (<< 4.4.18-1.1), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), neovim (<< 0.6.0), zsh-static (<< 5.4.2-4)
Conffiles:
/etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains terminfo data files to support the most common types of
terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 646
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.3)
Description: terminal-related programs and man pages
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the programs used for manipulating the terminfo
database and individual terminfo entries, as well as some programs for
resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Replaces: alacritty (<< 0.3.4~), dvtm (<< 0.15-3), jfbterm (<< 0.4.7-10), kon2 (<< 0.3.9b-21), libiterm1 (<< 0.5-9), tn5250 (<< 0.17.4-3)
Depends: ncurses-base (>= 6.1+20190713)
Breaks: bash-static (<< 4.4.18-1.1), dvtm (<< 0.15-3), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), zsh-static (<< 5.4.2-4)
Description: additional terminal type definitions
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains all of the numerous terminal definitions not found in
the ncurses-base package.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: needrestart
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.5-5ubuntu2.1
Depends: perl:any, dpkg (>= 1.16.0), gettext-base, libintl-perl, libproc-processtable-perl, libsort-naturally-perl, libmodule-scandeps-perl, libterm-readkey-perl, libmodule-find-perl, binutils, xz-utils
Recommends: libpam-systemd | sysvinit-core
Suggests: needrestart-session | libnotify-bin, iucode-tool
Enhances: intel-microcode
Conffiles:
/etc/apt/apt.conf.d/99needrestart c04ae6629632795828b90dc04b67c6a4
/etc/dpkg/dpkg.cfg.d/needrestart 53f557552f8e6f1c8512d71eb89b7638
/etc/needrestart/conf.d/README.needrestart a1ef1575bfa695c11492ff7457e5c93e
/etc/needrestart/hook.d/10-dpkg 0350df665552fca4b2e371d8ec546101
/etc/needrestart/hook.d/20-rpm 7157aa9de873c3c7ad5bf62b5768adb9
/etc/needrestart/hook.d/90-none 3892c7ecdbc590a1a0dee8a0df6d5695
/etc/needrestart/iucode.sh 080c4c295dbcffce6d9ab3ecb85ec5b6
/etc/needrestart/needrestart.conf df6aa5484b23d1c7b6e2103c0d329baa
/etc/needrestart/notify.conf 1e3d19b4157f3d5af960b65cb368b5ba
/etc/needrestart/notify.d/200-write c20841e6085d2a10670abe1f7e6727ba
/etc/needrestart/notify.d/400-notify-send 37661707e75f680afc028d33df1c9c14
/etc/needrestart/notify.d/600-mail 350d5580971e89cb3a334d974a3f971d
/etc/needrestart/notify.d/README.needrestart ca287f2c1d0b1f4937c72564b28551b2
/etc/needrestart/restart.d/README.needrestart 5b5904ab8d65eaae3644a8d97b1584bb
/etc/needrestart/restart.d/dbus.service af6adfe475eb7fcbbb99854f59e1de76
/etc/needrestart/restart.d/systemd-manager b22b648806843de869331c587f5138c0
/etc/needrestart/restart.d/sysv-init 57d64c59621664a915f6a8e9b672c815
Description: check which daemons need to be restarted after library upgrades
needrestart checks which daemons need to be restarted after library upgrades.
It is inspired by checkrestart from the debian-goodies package.
.
Features:
- supports (but does not require) systemd
- binary blacklisting (i.e. display managers)
- tries to detect required restarts of interpreter based daemons
(supports Java, Perl, Python, Ruby)
- tries to detect required restarts of containers (docker, LXC)
- tries to detect pending kernel upgrades
- tries to detect pending microcode upgrades for Intel CPUs
- could be used as nagios check_command
- fully integrated into apt/dpkg using hooks
Homepage: https://github.com/liske/needrestart
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 800
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60+git20181103.0eebece-1ubuntu5
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: NET-3 networking toolkit
This package includes the important tools for controlling the network
subsystem of the Linux kernel. This includes arp, ifconfig, netstat,
rarp, nameif and route. Additionally, this package contains utilities
relating to particular network hardware types (plipconfig, slattach,
mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
.
In the upstream package 'hostname' and friends are included. Those are
not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/
Original-Maintainer: net-tools Team <team+net-tools@tracker.debian.org>
Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 6.3
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
/etc/ethertypes cde059c510632569fb1869eb86cc026d
/etc/protocols bb9c019d6524e913fd72441d58b68216
/etc/rpc f0b6f6352bf886623adc04183120f83b
/etc/services 3975f0d8c4e1ecb25f035edfb1ba27ac
Description: Basic TCP/IP networking system
This package provides the necessary infrastructure for basic TCP/IP based
networking.
.
In particular, it supplies common name-to-number mappings in /etc/services,
/etc/rpc, /etc/protocols and /etc/ethertypes.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.218-4ubuntu1
Replaces: netcat (<< 1.10-35)
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.34)
Breaks: netcat (<< 1.10-35)
Description: TCP/IP swiss army knife
A simple Unix utility which reads and writes data across network connections
using TCP or UDP protocol. It is designed to be a reliable "back-end" tool
that can be used directly or easily driven by other programs and scripts. At
the same time it is a feature-rich network debugging and exploration tool,
since it can create almost any kind of connection you would need and has
several interesting built-in capabilities.
.
This package contains the OpenBSD rewrite of netcat, including support for
IPv6, proxies, and Unix sockets.
Original-Maintainer: Guilhem Moulin <guilhem@debian.org>
Package: netplan.io
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.106.1-7ubuntu0.22.04.2
Replaces: nplan (<< 0.34~)
Provides: nplan
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.70.0), libnetplan0 (= 0.106.1-7ubuntu0.22.04.2), libsystemd0 (>= 243), iproute2, python3, python3-dbus, python3-yaml, python3-netifaces, systemd (>= 248~)
Suggests: network-manager | wpasupplicant, openvswitch-switch, python3-rich, iw
Breaks: nplan (<< 0.34~)
Conflicts: netplan
Description: YAML network configuration abstraction for various backends
netplan reads YAML network configuration files which are written
by administrators, installers, cloud image instantiations, or other OS
deployments. During early boot it then generates backend specific
configuration files in /run to hand off control of devices to a particular
networking daemon.
.
Currently supported backends are networkd and NetworkManager.
Homepage: https://netplan.io/
Original-Maintainer: Debian Netplan Maintainers <team+netplan@tracker.debian.org>
Package: networkd-dispatcher
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.1-2ubuntu0.22.04.2
Depends: dbus, gir1.2-glib-2.0, python3-dbus, python3-gi, python3:any
Suggests: iw | wireless-tools
Conffiles:
/etc/default/networkd-dispatcher 30d74108d00da7497f70395c32658a41
Description: Dispatcher service for systemd-networkd connection status changes
Networkd-dispatcher is a dispatcher daemon for systemd-networkd
connection status changes. It is similar to NetworkManager-dispatcher,
but is much more limited in the types of events it supports due to the
limited nature of systemd-networkd.
Homepage: https://github.com/craftyguy/networkd-dispatcher
Original-Maintainer: Julian Andres Klode <jak@debian.org>
Package: nfs-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 885
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: nfs-utils
Version: 1:2.6.1-1ubuntu1.2
Replaces: nfs-client
Provides: nfs-client
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libcom-err2 (>= 1.43.9), libdevmapper1.02.1 (>= 2:1.02.97), libevent-core-2.1-7 (>= 2.1.8-stable), libgssapi-krb5-2 (>= 1.17), libkeyutils1 (>= 1.5.9), libkrb5-3 (>= 1.10+dfsg~alpha1), libmount1 (>= 2.19.1), libnfsidmap1 (= 1:2.6.1-1ubuntu1.2), libtirpc3 (>= 1.0.2), libwrap0 (>= 7.6-4~), rpcbind, adduser, ucf, lsb-base, keyutils, python3
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: open-iscsi, watchdog
Conflicts: nfs-client
Conffiles:
/etc/default/nfs-common ddcb1fbb90a14ff9850f22eed0127a10
/etc/init.d/nfs-common 54a170f8dab112f2f6d7f49db71fcc34
/etc/request-key.d/id_resolver.conf c7df239caa9880e7d6048cff6d46adc7
Description: NFS support files common to client and server
Use this package on any machine that uses NFS, either as client or
server. Programs included: lockd, statd, showmount, nfsstat, gssd,
idmapd and mount.nfs.
Homepage: https://linux-nfs.org/
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.2-1ubuntu3
Depends: libnftables1 (= 1.0.2-1ubuntu3), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
/etc/nftables.conf b10493a168ed8e96d0d56408721425c4
Description: Program to control packet filtering rules by Netfilter project
This software provides an in-kernel packet classification framework that is
based on a network-specific Virtual Machine (VM) and the nft userspace
command line tool. The nftables framework reuses the existing Netfilter
subsystems such as the existing hook infrastructure, the connection tracking
system, NAT, userspace queueing and logging subsystem.
.
nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
.
Netfilter software and nftables in particular are used in applications such
as Internet connection sharing, firewalls, IP accounting, transparent
proxying, advanced routing and traffic control.
.
A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: nodejs
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 192598
Maintainer: NodeSource Support <support@nodesource.com>
Architecture: amd64
Version: 20.18.1-1nodesource1
Replaces: nodejs-dev (<= 0.8.22), nodejs-legacy, npm (<= 1.2.14)
Provides: nodejs-dev, nodejs-doc, nodejs-legacy, npm
Depends: libc6 (>= 2.28), libgcc1 (>= 1:3.4), libstdc++6 (>= 5.2), python3, ca-certificates
Conflicts: nodejs-dev, nodejs-doc, nodejs-legacy, npm
Description: Node.js event-based server-side javascript engine
Node.js is similar in design to and influenced by systems like
Ruby's Event Machine or Python's Twisted.
.
It takes the event model a bit further - it presents the event
loop as a language construct instead of as a library.
.
Node.js is bundled with several useful libraries to handle server tasks :
System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
Homepage: https://nodejs.org
Package: ntfs-3g
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2021.8.22-3ubuntu1.2
Depends: libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgnutls30 (>= 3.7.2), libntfs-3g89 (= 1:2021.8.22-3ubuntu1.2)
Pre-Depends: fuse3
Description: read/write NTFS driver for FUSE
NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
filesystem used by Microsoft Windows.
Homepage: https://github.com/tuxera/ntfs-3g/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: open-iscsi
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1221
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1.5-1ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.51), libc6 (>= 2.34), libisns0, libkmod2 (>= 5~), libmount1 (>= 2.24.2), libopeniscsiusr (>= 2.1.5), libssl3 (>= 3.0.0~~alpha1), libsystemd0, udev
Pre-Depends: debconf | debconf-2.0
Recommends: busybox-initramfs, finalrd (>= 3)
Conffiles:
/etc/default/open-iscsi 5744c65409cbdea2bcf5b99dbff89e96
/etc/init.d/iscsid f45c4e0127bafee72454ce97a7ce2f6c
/etc/init.d/open-iscsi b17044873b86412cbadeba711edcc41a
/etc/iscsi/iscsid.conf 71f8f1fd14d91dc776aee2ee7fb6c70f
Description: iSCSI initiator tools
The Open-iSCSI project is a high-performance, transport independent,
multi-platform implementation of RFC3720 iSCSI.
.
Open-iSCSI is partitioned into user and kernel parts.
.
The kernel portion of Open-iSCSI is a from-scratch code
licensed under GPL. The kernel part implements iSCSI data path
(that is, iSCSI Read and iSCSI Write), and consists of three
loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.
.
User space contains the entire control plane: configuration
manager, iSCSI Discovery, Login and Logout processing,
connection-level error processing, Nop-In and Nop-Out handling,
and (in the future:) Text processing, iSNS, SLP, Radius, etc.
.
The user space Open-iSCSI consists of a daemon process called
iscsid, and a management utility iscsiadm.
.
This package includes a daemon, iscsid, and a management utility,
iscsiadm.
Homepage: https://www.open-iscsi.com/
Original-Maintainer: Debian iSCSI Maintainers <open-iscsi@packages.debian.org>
Package: open-vm-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:12.1.5-3~ubuntu0.22.04.4
Replaces: open-vm-tools-sdmp (<< 2:12.1.0-2~)
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.3), libfuse3-3 (>= 3.2.3), libgcc-s1 (>= 3.3), libglib2.0-0 (>= 2.31.8), libmspack0 (>= 0.4), libssl3 (>= 3.0.0~~alpha1), libtirpc3 (>= 1.0.2), libudev1 (>= 183), libxml2 (>= 2.7.4), libxmlsec1 (>= 1.2.33), libxmlsec1-openssl (>= 1.2.33), pciutils, iproute2, lsb-release
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ethtool, zerofree, fuse3
Suggests: open-vm-tools-desktop, cloud-init, open-vm-tools-containerinfo, open-vm-tools-salt-minion
Breaks: open-vm-tools-sdmp (<< 2:12.1.0-2~)
Conffiles:
/etc/init.d/open-vm-tools aeead08272288e4dfbaaf30d0c250726
/etc/pam.d/vmtoolsd c8d3eb12e396c1824018eea75e5f9d56
/etc/vmware-tools/poweroff-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/poweron-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/resume-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/scripts/vmware/network e1dc72426f8f60ee6a568878cf6421ce
/etc/vmware-tools/statechange.subr 9ebfc4a9aa22fe49491ad4ac47d4d22c
/etc/vmware-tools/suspend-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/tools.conf 76d7075ddb1a4266cb7e43f3a50181b7
/etc/vmware-tools/tools.conf.example 6c68972b65c559b411f393c5a48b743c
/etc/vmware-tools/vgauth.conf 08a49e9affbd864b51b8b77251accd89
/etc/vmware-tools/vgauth/schemas/XMLSchema-hasFacetAndProperty.xsd 9308e8b04cbf7d2748a287ace40878ea
/etc/vmware-tools/vgauth/schemas/XMLSchema-instance.xsd e1059f0307358c02766193e5e24c107b
/etc/vmware-tools/vgauth/schemas/XMLSchema.dtd 86eafc21ca4ab293b7515e453c2b5dfe
/etc/vmware-tools/vgauth/schemas/XMLSchema.xsd 54f86ef1a7a41930ba250151f143069b
/etc/vmware-tools/vgauth/schemas/catalog.xml de4f8846e6e571af9feddd834b33a9be
/etc/vmware-tools/vgauth/schemas/datatypes.dtd c61228050bb7c1c28a7f659f86a6e6c9
/etc/vmware-tools/vgauth/schemas/saml-schema-assertion-2.0.xsd a6dc9abcc0cb7bd4e53c51642f46ffaa
/etc/vmware-tools/vgauth/schemas/xenc-schema.xsd 4e7be0e2cae08227fd9ddb261c1e4e93
/etc/vmware-tools/vgauth/schemas/xml.xsd d4314590e7e7aaf6bcd508be0fd1c614
/etc/vmware-tools/vgauth/schemas/xmldsig-core-schema.xsd dff329f34df298d952d2e800a097c431
Description: Open VMware Tools for virtual machines hosted on VMware (CLI)
The Open Virtual Machine Tools (open-vm-tools) project is an open source
implementation of VMware Tools. It is a suite of virtualization utilities and
drivers to improve the functionality, user experience and administration of
VMware virtual machines.
.
This package contains only the core user-space programs and libraries.
Homepage: https://github.com/vmware/open-vm-tools
Original-Maintainer: Bernd Zeimetz <bzed@debian.org>
Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3092
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.4
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3 (>= 3.0.2), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
/etc/ssh/ssh_config 8a5bddc82befb71d8ef34cc903d3d077
Description: secure shell (SSH) client, for secure access to remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the ssh, scp and sftp clients, the ssh-agent
and ssh-add programs to make public key authentication more convenient,
and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
ssh replaces the insecure rsh, rcp and rlogin programs, which are
obsolete for most purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1501
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.4
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.9p1-3ubuntu0.4), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.2), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth, ssh-import-id
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
/etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
/etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
/etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
/etc/ssh/moduli e8fbe2dcefa45888cf7341d78d8258ce
/etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the sshd server.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
sshd replaces the insecure rshd program, which is obsolete for most
purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.4
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.9p1-3ubuntu0.4), libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the SFTP server module for the SSH server. It
is needed if you want to access your SSH server with SFTP. The SFTP
server module also works with other SSH daemons like dropbear.
.
OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
protocol described in:
.
http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
.
Newer versions of the draft will not be supported, though some features
are individually implemented as extensions.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2053
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0.2-0ubuntu1.12
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.2-0ubuntu1.2)
Suggests: ca-certificates
Conffiles:
/etc/ssl/openssl.cnf 6b4a72a4ce84bab35d884e536295e14f
Description: Secure Sockets Layer toolkit - cryptographic utility
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It contains the general-purpose command line binary /usr/bin/openssl,
useful for cryptographic operations such as:
* creating RSA, DH, and DSA key parameters;
* creating X.509 certificates, CSRs, and CRLs;
* calculating message digests;
* encrypting and decrypting with ciphers;
* testing SSL/TLS clients and servers;
* handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Package: os-prober
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.79ubuntu2
Depends: libc6 (>= 2.34), grub-common, mount
Description: utility to detect other OSes on a set of drives
This package detects other OSes available on a system and outputs the
results in a generic machine-readable format.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: overlayroot
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 66
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.47ubuntu1
Depends: cryptsetup, cryptsetup-bin, initramfs-tools
Suggests: haveged
Conffiles:
/etc/overlayroot.conf 40086f3ab7223af23f79225c60b4d47d
/etc/update-motd.d/97-overlayroot 51a409ec9a8608f9c5fa3f6605c78dd9
Description: use an overlayfs on top of a read-only root filesystem
This package adds functionality to an initramfs built by initramfs-tools.
When installed and configured, the initramfs will mount an overlayfs
filesystem on top of a read-only root volume.
.
The changes can be written to a in-memory temporary filesystem, a
filesystem on an existing block device, or a dmcrypt encrypted block
device.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: packagekit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.2.5-2ubuntu2
Depends: libglib2.0-bin, policykit-1, init-system-helpers (>= 1.52), libappstream4 (>= 0.10.0), libapt-pkg6.0 (>= 1.9.2), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libglib2.0-0 (>= 2.61.2), libgstreamer1.0-0 (>= 1.0.0), libpackagekit-glib2-18 (>= 1.2.4), libpolkit-gobject-1-0 (>= 0.99), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 11), libsystemd0 (>= 214)
Recommends: packagekit-tools, systemd
Suggests: appstream
Breaks: plymouth (<< 0.9.5)
Conffiles:
/etc/PackageKit/PackageKit.conf 71da11578968301072133d233e91cd1e
/etc/PackageKit/Vendor.conf ea3d03c3310b5470d0273659815c312d
/etc/apt/apt.conf.d/20packagekit f9751c0229fd14ae8d7b69de0645f7b3
/etc/dbus-1/system.d/org.freedesktop.PackageKit.conf fded44ee0c8edb7e65b9649570db3574
Description: Provides a package management service
PackageKit allows performing simple software management tasks over a DBus
interface e.g. refreshing the cache, updating, installing and removing
software packages or searching for multimedia codecs and file handlers.
.
The work is done by backends which make use of the package manager shipped by
the corresponding distribution. PackageKit is not meant to replace
advanced tools like Synaptic.
.
The main benefits are:
- unified interface on several distributions
- fine grained privileges by using PolicyKit
- independency from a running desktop session during the processing
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Package: packagekit-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: packagekit
Version: 1.2.5-2ubuntu2
Depends: packagekit (= 1.2.5-2ubuntu2), libc6 (>= 2.34), libglib2.0-0 (>= 2.54), libpackagekit-glib2-18 (>= 1.2.5)
Description: Provides PackageKit command-line tools
PackageKit allows performing simple software management tasks over a DBus
interface e.g. refreshing the cache, updating, installing and removing
software packages or searching for multimedia codecs and file handlers.
.
This package provides the PackageKit command-line tools.
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 167
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.4-2build1
Depends: libc6 (>= 2.34), libparted2 (= 3.4-2build1), libreadline8 (>= 6.0), libtinfo6 (>= 6)
Suggests: parted-doc
Description: disk partition manipulator
GNU Parted is a program that allows you to create, destroy, resize,
move, and copy disk partitions. This is useful for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
.
This package contains the binary and manual page. Further
documentation is available in parted-doc.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
partitioning formats, as well as a "loop" (raw disk) type which
allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
file systems. Parted also has the ability to create and modify file
systems of some of these types, but using it to perform file system
operations is now deprecated.
.
The nature of this software means that any bugs could cause massive
data loss. While there are no such bugs known at the moment, they
could exist, so please back up all important files before running
it, and do so at your own risk.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.8.1-2ubuntu2.1
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.3), libpam-modules
Recommends: sensible-utils
Conffiles:
/etc/default/useradd 559e87e86a6d1cb4b7f60a6f691d5150
/etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
/etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
/etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
/etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
/etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
This package includes passwd, chsh, chfn, and many other programs to
maintain password and group data.
.
Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: pastebinit
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 152
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.5.1-1ubuntu1
Replaces: bikeshed (<< 1.21)
Depends: python3, python3-distro
Breaks: bikeshed (<< 1.21)
Description: command-line pastebin client
pastebinit is a command-line tool to send data to a "pastebin", a web site
which allows its users to upload snippets of text for public viewing.
Homepage: https://phab.lubuntu.me/source/pastebinit/
Original-Maintainer: Simon Quigley <tsimonq2@debian.org>
Package: patch
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6-7build2
Depends: libc6 (>= 2.34)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
Patch will take a patch file containing any of the four forms
of difference listing produced by the diff program and apply
those differences to an original file, producing a patched
version.
Homepage: https://savannah.gnu.org/projects/patch/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: pci.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1282
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0~2022.01.22-1
Replaces: pciutils (<< 1:3.6.2-4~)
Breaks: pciutils (<< 1:3.6.2-4~)
Description: PCI ID Repository
This package contains the pci.ids file, a public repository of all known
ID's used in PCI devices: ID's of vendors, devices, subsystems and device
classes. It is used in various programs to display full human-readable
names instead of cryptic numeric codes.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://pci-ids.ucw.cz/
Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.7.0-6
Depends: libc6 (>= 2.34), libkmod2 (>= 5~), libpci3 (= 1:3.7.0-6)
Suggests: bzip2, wget | curl | lynx-cur
Description: PCI utilities
This package contains various utilities for inspecting and setting of
devices connected to the PCI bus.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://mj.ucw.cz/sw/pciutils/
Package: percona-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 47
Maintainer: Percona Development Team <info@percona.com>
Architecture: all
Version: 1.0-27.generic
Depends: findutils, curl, grep, lsb-release
Pre-Depends: gpgv
Conffiles:
/etc/apt/trusted.gpg.d/percona-keyring.gpg a5155d098458102b968af9b60d6c0d32
Description: Package to install Percona gpg key and APT repos
Homepage: https://www.percona.com/downloads/percona-release
Package: percona-server-common-5.7
Status: deinstall ok config-files
Priority: extra
Section: database
Installed-Size: 2859
Maintainer: Percona Server Development Team <mysql-dev@percona.com>
Architecture: amd64
Multi-Arch: foreign
Source: percona-server-5.7
Version: 5.7.44-48-1.focal
Config-Version: 5.7.44-48-1.focal
Pre-Depends: debconf (>= 0.2.17), mysql-common, debsums
Conffiles:
/etc/mysql/percona-server.cnf 2b0b2d2b0f7e087f64e0e8cb4636b2b5
/etc/mysql/percona-server.conf.d/mysqld.cnf c86fafa077bb5fb7f2e11adac2084dd6
/etc/mysql/percona-server.conf.d/mysqld_safe.cnf d339078d0e131279bde86cdac0f91828
Description: Percona Server database common files (e.g. /etc/mysql/my.cnf)
Percona Server is a fast, stable and true multi-user, multi-threaded SQL
database server. SQL (Structured Query Language) is the most popular database
query language in the world. The main goals of Percona Server are speed,
robustness and ease of use.
.
This package includes files needed by all versions of the client library
(e.g. /etc/mysql/my.cnf).
Homepage: http://www.percona.com/software/percona-server/
Package: percona-server-server-5.7
Status: deinstall ok config-files
Priority: extra
Section: database
Installed-Size: 182920
Maintainer: Percona Server Development Team <mysql-dev@percona.com>
Architecture: amd64
Source: percona-server-5.7
Version: 5.7.44-48-1.focal
Config-Version: 5.7.44-48-1.focal
Replaces: mariadb-server, mariadb-server-5.5, mariadb-server-core-5.5, mysql-server-5.0, mysql-server-5.1, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, percona-server-server-5.1, percona-server-server-5.5, percona-server-server-5.6, percona-xtradb-server-5.0, virtual-mysql-server, virtual-mysql-server-core
Provides: mysql-server, mysql-server-5.7, mysql-server-core-5.7, virtual-mysql-server, virtual-mysql-server-core
Depends: percona-server-common-5.7 (= 5.7.44-48-1.focal), percona-server-client-5.7 (= 5.7.44-48-1.focal), libaio1 (>= 0.3.93), libc6 (>= 2.29), libcrypt1 (>= 1:4.1.0), libcurl4 (>= 7.16.2), libgcc-s1 (>= 4.0), libmecab2 (>= 0.996), libnuma1 (>= 2.0.11), libpam0g (>= 0.99.7.1), libsasl2-2 (>= 2.1.27+dfsg), libssl1.1 (>= 1.1.1), libstdc++6 (>= 9), libwrap0 (>= 7.6-4~), debconf (>= 0.5) | debconf-2.0, psmisc, openssl
Pre-Depends: adduser, debconf (>= 0.2.17)
Breaks: mariadb-server, mariadb-server-5.5, mariadb-server-core-5.5, mysql-server-5.0, mysql-server-5.1, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, percona-server-server-5.1, percona-server-server-5.5, percona-server-server-5.6, percona-xtradb-server-5.0, virtual-mysql-server, virtual-mysql-server-core
Conffiles:
/etc/default/mysql 411017694159faf10992b3d4f8818983
/etc/init.d/mysql 7349c3e3badbf6509808d43938aa8d9f
Description: Percona Server database server binaries
Percona Server is a fast, stable and true multi-user, multi-threaded SQL
database server. SQL (Structured Query Language) is the most popular database
query language in the world. The main goals of Percona Server are speed,
robustness and ease of use.
.
This package includes the server binaries.
Homepage: http://www.percona.com/software/percona-server/
Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 717
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 5.34.0-3ubuntu1.3
Replaces: perl-base (<< 5.34.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 2.38), libattribute-handlers-perl (= 1.01), libautodie-perl (= 2.34), libcompress-raw-bzip2-perl (= 2.101), libcompress-raw-zlib-perl (= 2.101), libcompress-zlib-perl (= 2.102), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58), libdigest-perl (= 1.19), libdigest-sha-perl (= 6.02), libencode-perl (= 3.08), libexperimental-perl (= 0.024), libextutils-cbuilder-perl (= 0.280236), libextutils-command-perl (= 7.62), libextutils-install-perl (= 2.20), libextutils-parsexs-perl (= 3.430000), libfile-spec-perl (= 3.8000), libhttp-tiny-perl (= 0.076), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.102), libio-compress-bzip2-perl (= 2.102), libio-compress-perl (= 2.102), libio-compress-zlib-perl (= 2.102), libio-zlib-perl (= 1.11), libjson-pp-perl (= 4.06000), liblocale-maketext-perl (= 1.29), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999818), libmath-complex-perl (= 1.5902), libmime-base64-perl (= 3.16), libmodule-corelist-perl (= 5.20210520), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000037), libnet-perl (= 1:3.13), libnet-ping-perl (= 2.74), libparams-check-perl (= 0.38), libparent-perl (= 0.238), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.42), libstorable-perl (= 3.23), libsys-syslog-perl (= 0.36), libtest-harness-perl (= 3.43), libtest-simple-perl (= 1.302183), libtest-tester-perl (= 1.302183), libtest-use-ok-perl (= 1.302183), libthread-queue-perl (= 3.14), libthreads-perl (= 2.26), libthreads-shared-perl (= 1.62), libtime-hires-perl (= 1.9767), libtime-local-perl (= 1.3000), libtime-piece-perl (= 1.3401), libunicode-collate-perl (= 1.29), libversion-perl (= 1:0.9928), libversion-requirements-perl, podlators-perl (= 4.14)
Depends: perl-base (= 5.34.0-3ubuntu1.3), perl-modules-5.34 (>= 5.34.0-3ubuntu1.3), libperl5.34 (= 5.34.0-3ubuntu1.3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.34.0-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
/etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
Perl is a highly capable, feature-rich programming language with over
20 years of development. Perl 5 runs on over 100 platforms from
portables to mainframes. Perl is suitable for both rapid prototyping
and large scale development projects.
.
Perl 5 supports many programming styles, including procedural,
functional, and object-oriented. In addition to this, it is supported
by an ever-growing collection of reusable modules which accelerate
development. Some of these modules include Web frameworks, database
integration, networking protocols, and encryption. Perl provides
interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7734
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.34.0-3ubuntu1.3
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libscalar-list-utils-perl (<< 1:1.55), libsocket-perl (<< 2.031), libxsloader-perl (<< 0.30), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.41), libscalar-list-utils-perl (= 1:1.55), libsocket-perl (= 2.031), libxsloader-perl (= 0.30), perlapi-5.34.0
Pre-Depends: libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), dpkg (>= 1.17.17)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 3.3.1-2), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.8000), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libmp3-tag-perl (<< 1.13-1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.55), libsocket-perl (<< 2.031), libxsloader-perl (<< 0.30), mailagent (<< 1:3.1-81-2), perl (<< 5.34.0~), perl-modules (<< 5.34.0~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
Perl is a scripting language used in many system scripts and utilities.
.
This package provides a Perl interpreter and the small subset of the
standard run-time library required to perform basic tasks. For a full
Perl installation, install "perl" (and its dependencies, "perl-modules-5.34"
and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: perl-modules-5.34
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 17671
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.34.0-3ubuntu1.3
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.38), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.19), libexperimental-perl (<< 0.024), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.62), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.430000), libfile-spec-perl (<< 3.8000), libhttp-tiny-perl (<< 0.076), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.06000), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999818), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20210520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.13), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.42), libtest-harness-perl (<< 3.43), libtest-simple-perl (<< 1.302183), libtest-tester-perl (<< 1.302183), libtest-use-ok-perl (<< 1.302183), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.29), libversion-perl (<< 1:0.9928), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.14)
Provides: perl-modules
Depends: perl-base (>= 5.34.0-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.34.0-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.38), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.19), libexperimental-perl (<< 0.024), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.62), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.430000), libfile-spec-perl (<< 3.8000), libhttp-tiny-perl (<< 0.076), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.06000), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999818), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20210520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.13), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.42), libtest-harness-perl (<< 3.43), libtest-simple-perl (<< 1.302183), libtest-tester-perl (<< 1.302183), libtest-use-ok-perl (<< 1.302183), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.29), libversion-perl (<< 1:0.9928), maildirsync (<< 1.2-2.1), perl (<< 5.34.0~), podlators-perl (<< 4.14)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
Architecture independent Perl modules. These modules are part of Perl and
required if the `perl' package is installed.
.
Note that this package only exists to save archive space and should be
considered an internal implementation detail of the `perl' package.
Other packages should not depend on `perl-modules-5.34' directly, they
should use `perl' (which depends on `perl-modules-5.34') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 5build2
Provides: dh-sequence-perl-openssl, perl-openssl-abi-3
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Breaks: libcrypt-openssl-bignum-perl (<< 0.07-2), libcrypt-openssl-dsa-perl (<< 0.18-2), libcrypt-openssl-pkcs10-perl (<< 0.16-2), libcrypt-openssl-pkcs12-perl (<< 0.7-3), libcrypt-openssl-rsa-perl (<< 0.28-5), libcrypt-openssl-x509-perl (<< 1.8.7-3), libcrypt-smime-perl (<< 0.19-2), libcrypt-ssleay-perl (<< 0.73.04-2), libnet-ssleay-perl (<< 1.78-2)
Description: version compatibility baseline for Perl OpenSSL packages
A subset of Perl XS module packages expose the OpenSSL binary interface
to Perl code. This can lead to incompatibilities if these packages are
linked against different versions of OpenSSL.
.
This package provides a virtual package "perl-openssl-abi-x" that
corresponds to the libssl-dev package SONAME it was built against.
The packages that need to stay compatible with each other can depend
on this.
.
Tools are also provided for generating this dependency with minimum
hassle. See the instructions in README.Debian.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-defaults (92ubuntu1)
Version: 2:8.1+92ubuntu1
Depends: php8.1
Description: server-side, HTML-embedded scripting language (default)
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
.
This package is a dependency package, which depends on latest stable
PHP version (currently 8.1).
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: php-defaults (92ubuntu1)
Version: 2:92ubuntu1
Depends: psmisc (>= 22.15-1~)
Breaks: php-amqp (<< 1.11.0-4~), php-apcu (<< 5.1.21+4.0.11-7~), php-ast (<< 1.0.16-4~), php-ds (<< 1.4.0-4~), php-facedetect (<< 1.1.0-19-g135c72a-2build3~), php-gearman (<< 2.1.0+1.1.2-11~), php-gmagick (<< 2.0.6~rc1+1.1.7~rc3-10~), php-gnupg (<< 1.5.0-6~), php-igbinary (<< 3.2.6+2.0.8-6~), php-imagick (<< 3.6.0-4~), php-libvirt-php (<< 0.5.5-3ubuntu2~), php-lua (<< 2.0.7+1.1.0-13~), php-mailparse (<< 3.1.2+2.1.7~dev20160128-7~), php-memcache (<< 8.0+4.0.5.2+3.0.9~20170802.e702b5f9+-7~), php-memcached (<< 3.1.5+2.2.0-14~), php-mongodb (<< 1.12.0+1.9.2+1.7.5-4~), php-msgpack (<< 2.2.0~rc1+2.1.2+0.5.7-6~), php-mysqlnd-ms (<< 1.6.0+svn333622-15~), php-oauth (<< 2.0.7+1.2.3-14~), php-pcov (<< 1.0.11-4~), php-pecl-http (<< 4.2.1+php8-2~), php-ps (<< 1.4.4+1.3.7-6~), php-psr (<< 1.2.0-4~), php-radius (<< 1.4.0~b1-22~), php-raphf (<< 2.0.1+1.1.2-13~), php-redis (<< 5.3.5+4.3.0-5~), php-rrd (<< 2.0.3+1.1.3-6~), php-smbclient (<< 1.0.6-6~), php-ssh2 (<< 1.3.1+0.13-6~), php-stomp (<< 2.0.2+1.0.9-15~), php-tideways (<< 5.0.4-2build3~), php-uopz (<< 7.1.1+6.1.2-5~), php-uploadprogress (<< 2.0.2+1.1.4-6~), php-uuid (<< 1.2.0-11~), php-xdebug (<< 3.1.2+2.9.8+2.8.1+2.5.5-4~), php-xmlrpc (<< 3:1.0.0~rc3-2~), php-yac (<< 2.3.1+0.9.2-4~), php-yaml (<< 2.2.2+2.1.0+2.0.4+1.3.2-5~), php-zmq (<< 1.1.3-23~), php5.6-common, php5.6-json (<< 1.3.9-2~), php7.0-common, php7.1-common, php7.2-common, php7.3-common, php7.4-common, php8.0-common
Conffiles:
/etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
This package contains common utilities shared among all packaged PHP
versions.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php-composer-ca-bundle
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.1-1
Depends: ca-certificates, php-common
Description: utility library to find a path to the system CA bundle
The ca-bundle library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/ca-bundle
Package: php-composer-metadata-minifier
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-2
Depends: php-common
Description: Small utility library that handles metadata minification and expansion
This library has been split away from Composer. It’s used to handle metadata
minification and expansion.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/metadata-minifier
Package: php-composer-pcre
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.0.1-1
Depends: php-common
Description: PCRE wrapping library that offers type-safe preg_* replacements
This library gives you a way to ensure `preg_*` functions do not fail
silently, returning unexpected `null`s that may not be handled.
.
It also makes it easier to work with static analysis tools like PHPStan
or Psalm as it simplifies and reduces the possible return values from
all the `preg_*` functions which are quite packed with edge cases.
.
This library is a thin wrapper around `preg_*` functions with some
limitations. If you are looking for a richer API to handle regular
expressions have a look at rawr/t-regx instead.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/pcre
Package: php-composer-semver
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.2.9-1
Depends: php-common
Description: utilities, version constraint parsing and validation
The semver (Semantic Versioning) library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/semver
Package: php-composer-spdx-licenses
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.5.6-1
Depends: php-common
Description: SPDX licenses list and validation library
This library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/spdx-licenses
Package: php-composer-xdebug-handler
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.0.4-1build1
Depends: php-common, php-psr-log, php-composer-pcre (>= 1), php-composer-pcre (<< 2~~)
Description: Restarts a process without Xdebug
This library has been split away from Composer. It’s used to restart a CLI
process without loading the xdebug extension.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/xdebug-handler
Package: php-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-defaults (92ubuntu1)
Version: 2:8.1+92ubuntu1
Depends: php-common, php8.1-intl
Description: Internationalisation module for PHP [default]
This package provides a Internationalisation module for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
.
This package is a dependency package, which depends on Debian's default
PHP version (currently 8.1).
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php-json-schema
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.2.11-1
Depends: php-cli, php-common
Description: implementation of JSON schema
JSON Schema defines the media type "application/schema+json", a JSON
based format for defining the structure of JSON data. JSON Schema
provides a contract for what JSON data is required for a given
application and how to interact with it. JSON Schema is intended to
define validation, documentation, hyperlink navigation, and interaction
control of JSON data.
.
This package provides a PHP library for validating JSON Structures
against a given Schema.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/justinrainbow/json-schema
Package: php-pear
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 2071
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:1.10.9+submodules+notgz-1ubuntu0.20.04.3
Config-Version: 1:1.10.9+submodules+notgz-1ubuntu0.20.04.3
Provides: php-console-getopt, php-structures-graph, php-xml-util
Depends: php-cli, php-common, php-xml
Breaks: php-pear-frontend-gtk (<< 0.4.0), php-pear-frontend-web (<= 0.4)
Description: PEAR Base System
The PEAR package contains:
* the PEAR installer, for creating, distributing
and installing packages
* the PEAR_Exception PHP5 error handling mechanism
* the PEAR_ErrorStack advanced error handling mechanism
* the PEAR_Error error handling mechanism
* the OS_Guess class for retrieving info about the OS
where PHP is running on
* the System class for quick handling of common operations
with files and directories
* the PEAR base class
Features in a nutshell:
* full support for channels
* pre-download dependency validation
* new package.xml 2.0 format allows tremendous flexibility while maintaining
BC
* support for optional dependency groups and limited support for
sub-packaging
* robust dependency support
* full dependency validation on uninstall
* remote install for hosts with only ftp access - no more problems with
restricted host installation
* full support for mirroring
* support for bundling several packages into a single tarball
* support for static dependencies on a url-based package
* support for custom file roles and installation tasks
Homepage: https://pear.php.net/package/PEAR
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php-psr-container
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.0.2-1
Depends: php-common
Description: Common Container Interface (PHP FIG PSR-11)
PSR Container holds all interfaces/classes/traits related to PSR-11. Note that
this is not a container implementation of its own. See the specification for
more details.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://www.php-fig.org/psr/psr-11/
Package: php-psr-log
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.0-1
Depends: php-common
Description: common interface for logging libraries
The main goal is to allow libraries to receive a Psr\Log\LoggerInterface object
and write logs to it in a simple and universal way. Frameworks and CMSs that
have custom needs MAY extend the interface for their own purpose, but SHOULD
remain compatible with this document. This ensures that the third-party
libraries an application uses can write to the centralized application logs.
.
The LoggerInterface exposes eight methods to write logs to the eight RFC 5424
levels (debug, info, notice, warning, error, critical, alert, emergency).
.
A ninth method, log, accepts a log level as first argument. Calling this method
with one of the log level constants MUST have the same result as calling the
level-specific method. Calling this method with a level not defined by this
specification MUST throw a Psr\Log\InvalidArgumentException if the
implementation does not know about the level. Users SHOULD NOT use a custom
level without knowing for sure the current implementation supports it.
.
Note that this is not a logger of its own. It is merely an interface that
describes a logger. See the specification for more details.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://www.php-fig.org/psr/psr-3/
Package: php-react-promise
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.7.0-2
Depends: php-common
Description: lightweight implementation of CommonJS Promises/A for PHP
React/Promise also provides several other useful promise-related
concepts, such as joining multiple promises and mapping and reducing
collections of promises.
It is part of ReactPHP.
Original-Maintainer: Teckids Debian Task Force <tdtf@lists.teckids.org>
Homepage: https://reactphp.org/promise/
Package: php-symfony-console
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 5.4.4+dfsg-1ubuntu8
Provides: php-psr-log-implementation
Depends: php-common, php-symfony-deprecation-contracts, php-mbstring, php-symfony-polyfill-php80 (>= 1.16), php-symfony-polyfill-php80 (<< 2~~), php-symfony-service-contracts, php-symfony-string
Suggests: php-symfony-event-dispatcher, php-symfony-lock, php-symfony-process, php-psr-log
Breaks: php-symfony-dependency-injection (<< 4.4~~), php-symfony-dotenv (<< 5.1~~), php-symfony-event-dispatcher (<< 4.4~~), php-symfony-lock (<< 4.4~~), php-symfony-process (<< 4.4~~)
Description: run tasks from the command line
The Symfony Console Component can be used to implement recurring
or long running tasks, such as cronjobs, imports or other batch
jobs. Additionally it assists the creation of nice looking command
line interfaces.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/5.4/components/console.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-deprecation-contracts
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-symfony-contracts
Version: 2.4.0-1ubuntu2
Depends: php-common
Description: A generic function and convention to trigger deprecation notices
Symfony Contracts can be used to build on semantics that the Symfony components
proved useful - and that already have battle tested implementations.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/components/Contracts
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-filesystem
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 5.4.4+dfsg-1ubuntu8
Depends: php-common, php-mbstring, php-symfony-polyfill-php80 (>= 1.16), php-symfony-polyfill-php80 (<< 2~~)
Description: basic filesystem utilities
The Symfony Filesystem Component provides basic utilities to work
with the filesystem, like creating directories, removing files or
adding symlinks.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/5.4/components/filesystem.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-finder
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 5.4.4+dfsg-1ubuntu8
Depends: php-common, php-symfony-deprecation-contracts, php-symfony-polyfill-php80 (>= 1.16), php-symfony-polyfill-php80 (<< 2~~)
Description: find files and directories
The Symfony Finder Component provides an intuitive interface to
find files and directories.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/5.4/components/finder.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-polyfill-php80
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-symfony-polyfill
Version: 1.24.0-1ubuntu2
Depends: php-common
Description: Symfony polyfill backporting some PHP 8.0+ features to lower PHP versions
This component provides features added to PHP 8.0 core:
.
* Stringable interface
* fdiv
* ValueError class
* UnhandledMatchError class
* FILTER_VALIDATE_BOOL constant
* get_debug_type
* preg_last_error_msg
* str_contains
* str_starts_with
* str_ends_with
* get_resource_id
* Attribute class
.
The Symfony Polyfill project backports features found in the latest PHP
versions and provides compatibility layers for some extensions and functions.
It is intended to be used when portability across PHP versions and extensions
is desired.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-process
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 152
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 5.4.4+dfsg-1ubuntu8
Depends: php-common, php-symfony-polyfill-php80 (>= 1.16), php-symfony-polyfill-php80 (<< 2~~)
Description: execute commands in sub-processes
The Symfony Process Component helps with executing commands in
sub-processes by providing easy access to standard and error output
in real-time. It is especially handy for dealing with long running
sub-processes due to its feature to run them asynchronously, while
still providing access to their full and incremental output. It
additionally supports signals, provides the PID of a sub-process
and allows the definition of process timeouts.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/5.4/components/process.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-service-contracts
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-symfony-contracts
Version: 2.4.0-1ubuntu2
Replaces: php-symfony-contracts (<< 1.1.5)
Depends: php-common, php-psr-container (>= 2.0), php-psr-container (<< 3~~)
Suggests: php-symfony-service-implementation
Breaks: php-symfony-contracts (<< 1.1.5)
Description: Generic abstractions related to writing services
Symfony Contracts can be used to build on semantics that the Symfony components
proved useful - and that already have battle tested implementations.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/components/Contracts
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php-symfony-string
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 5.4.4+dfsg-1ubuntu8
Depends: php-common, php-intl, php-mbstring, php-symfony-polyfill-php80 (>= 1.15), php-symfony-polyfill-php80 (<< 2~~)
Breaks: php-symfony-translation-contracts (>= 3.0)
Description: object-oriented API to work with strings
The Symfony String component provides an object-oriented API to
strings and deals with bytes, UTF-8 code points and grapheme clusters in
a unified way.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/5.4/components/string.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: php7.0-common
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 4612
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-calendar, php-ctype, php-exif, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php7.0-calendar, php7.0-ctype, php7.0-exif, php7.0-fileinfo, php7.0-ftp, php7.0-gettext, php7.0-iconv, php7.0-pdo, php7.0-phar, php7.0-posix, php7.0-shmop, php7.0-sockets, php7.0-sysvmsg, php7.0-sysvsem, php7.0-sysvshm, php7.0-tokenizer
Depends: php-common (>= 1:33), ucf, libc6 (>= 2.15), libssl1.0.0 (>= 1.0.0)
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-curl
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-curl
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.14), libcurl3 (>= 7.18.0)
Description: CURL module for PHP
This package provides the CURL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-gd
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-gd
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.4), libgd3 (>= 2.1.1), libxpm4
Description: GD module for PHP
This package provides the GD module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-json
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-json
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.14)
Description: JSON module for PHP
This package provides the JSON module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-mysql
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 474
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php7.0-mysqli, php7.0-mysqlnd, php7.0-pdo-mysql
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.15)
Description: MySQL module for PHP
This package provides the MySQL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-opcache
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-opcache
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.14)
Description: Zend OpCache module for PHP
This package provides the Zend OpCache module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-readline
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Provides: php-readline
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.14), libedit2 (>= 3.1-20130611)
Description: readline module for PHP
This package provides the readline module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.0-xml
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0ubuntu0.16.04.16
Config-Version: 7.0.33-0ubuntu0.16.04.16
Replaces: php7.0-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-wddx, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php7.0-dom, php7.0-simplexml, php7.0-wddx, php7.0-xmlreader, php7.0-xmlwriter, php7.0-xsl
Depends: php-common (>= 1:33), ucf, php7.0-common (= 7.0.33-0ubuntu0.16.04.16), libc6 (>= 2.14), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php7.0-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP
This package provides the DOM, SimpleXML, WDDX, XML, and XSL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.2-cli
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 4844
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.2
Version: 7.2.24-0ubuntu0.18.04.17
Config-Version: 7.2.24-0ubuntu0.18.04.17
Provides: php-cli, phpapi-20170718
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, libpcre3 (>= 2:8.35), mime-support, php7.2-common (= 7.2.24-0ubuntu0.18.04.17), php7.2-json, php7.2-opcache, php7.2-readline, tzdata, ucf, libargon2-0 (>= 0~20160406~), libc6 (>= 2.27), libsodium23 (>= 1.0.14), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
This package provides the /usr/bin/php7.2 command interpreter, useful for
testing PHP scripts from a shell or performing general shell scripting tasks.
.
The following extensions are built in: Core date filter hash libxml openssl
pcntl pcre Reflection session sodium SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.2-common
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 6485
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.2
Version: 7.2.24-0ubuntu0.18.04.17
Config-Version: 7.2.24-0ubuntu0.18.04.17
Provides: php-calendar, php-ctype, php-exif, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php7.2-calendar, php7.2-ctype, php7.2-exif, php7.2-fileinfo, php7.2-ftp, php7.2-gettext, php7.2-iconv, php7.2-pdo, php7.2-phar, php7.2-posix, php7.2-shmop, php7.2-sockets, php7.2-sysvmsg, php7.2-sysvsem, php7.2-sysvshm, php7.2-tokenizer
Depends: php-common (>= 1:35), ucf, libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Breaks: php7.2-sodium
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Package: php7.4-cli
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 4727
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.4
Version: 7.4.3-4ubuntu2.19
Config-Version: 7.4.3-4ubuntu2.19
Provides: php-cli, phpapi-20190902
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, mime-support, php7.4-common (= 7.4.3-4ubuntu2.19), php7.4-json, php7.4-opcache, php7.4-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.29), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.14), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
This package provides the /usr/bin/php7.4 command interpreter, useful for
testing PHP scripts from a shell or performing general shell scripting tasks.
.
The following extensions are built in: Core date filter hash libxml openssl
pcntl pcre Reflection session sodium SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php7.4-common
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 7406
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.4
Version: 7.4.3-4ubuntu2.19
Config-Version: 7.4.3-4ubuntu2.19
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php7.4-calendar, php7.4-ctype, php7.4-exif, php7.4-ffi, php7.4-fileinfo, php7.4-ftp, php7.4-gettext, php7.4-iconv, php7.4-pdo, php7.4-phar, php7.4-posix, php7.4-shmop, php7.4-sockets, php7.4-sysvmsg, php7.4-sysvsem, php7.4-sysvshm, php7.4-tokenizer
Depends: php-common (>= 1:73), ucf, libc6 (>= 2.27), libffi7 (>= 3.3~20180313), libssl1.1 (>= 1.1.0)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php7.4-json
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.4
Version: 7.4.3-4ubuntu2.19
Config-Version: 7.4.3-4ubuntu2.19
Provides: php-json
Depends: php-common (>= 1:73), ucf, php7.4-common (= 7.4.3-4ubuntu2.19), libc6 (>= 2.14)
Description: JSON module for PHP
This package provides the JSON module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php7.4-opcache
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 572
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.4
Version: 7.4.3-4ubuntu2.19
Config-Version: 7.4.3-4ubuntu2.19
Provides: php-opcache
Depends: php-common (>= 1:73), ucf, php7.4-common (= 7.4.3-4ubuntu2.19), libc6 (>= 2.27)
Description: Zend OpCache module for PHP
This package provides the Zend OpCache module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php7.4-readline
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php7.4
Version: 7.4.3-4ubuntu2.19
Config-Version: 7.4.3-4ubuntu2.19
Provides: php-readline
Depends: php-common (>= 1:73), ucf, php7.4-common (= 7.4.3-4ubuntu2.19), libc6 (>= 2.14), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
This package provides the readline module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 8.1.2-1ubuntu2.14
Provides: php
Depends: libapache2-mod-php8.1 | php8.1-fpm | php8.1-cgi, php8.1-common
Description: server-side, HTML-embedded scripting language (metapackage)
This package is a metapackage that, when installed, guarantees that you
have at least one of the four server-side versions of the PHP interpreter
installed. Removing this package won't remove PHP from your system, however
it may remove other packages that depend on this one.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-bcmath
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.14)
Description: Bcmath module for PHP
This package provides the Bcmath module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5457
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-cli, php8.1-json, phpapi-20210902
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, mime-support, php8.1-common (= 8.1.2-1ubuntu2.20), php8.1-opcache, php8.1-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
This package provides the /usr/bin/php8.1 command interpreter, useful for
testing PHP scripts from a shell or performing general shell scripting tasks.
.
The following extensions are built in: Core date filter hash json libxml
openssl pcntl pcre Reflection session sodium SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8862
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.1-calendar, php8.1-ctype, php8.1-exif, php8.1-ffi, php8.1-fileinfo, php8.1-ftp, php8.1-gettext, php8.1-iconv, php8.1-pdo, php8.1-phar, php8.1-posix, php8.1-shmop, php8.1-sockets, php8.1-sysvmsg, php8.1-sysvsem, php8.1-sysvshm, php8.1-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0~~alpha1)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-curl
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.14), libcurl4 (>= 7.56.1)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
This package provides the CURL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-gd
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.4), libgd3 (>= 2.1.1)
Description: GD module for PHP
This package provides the GD module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 496
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-intl
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libicu70 (>= 70.1-1~)
Description: Internationalisation module for PHP
This package provides the Internationalisation module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1062
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
This package provides the MBSTRING module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 459
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.1-mysqli, php8.1-mysqlnd, php8.1-pdo-mysql
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.15)
Description: MySQL module for PHP
This package provides the MySQL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1013
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
This package provides the Zend OpCache module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
This package provides the readline module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 473
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Replaces: php8.1-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.1-dom, php8.1-simplexml, php8.1-xmlreader, php8.1-xmlwriter, php8.1-xsl
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.33), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php8.1-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: php8.1-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: php8.1
Version: 8.1.2-1ubuntu2.20
Provides: php-zip
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.2-1ubuntu2.20), libc6 (>= 2.33), libzip4 (>= 1.7.0)
Description: Zip module for PHP
This package provides the Zip module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Original-Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Package: pigz
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 158
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.6-1
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.2.6)
Pre-Depends: dpkg (>= 1.15.6)
Description: Parallel Implementation of GZip
pigz, which stands for Parallel Implementation of GZip, is a fully functional
replacement for gzip that takes advantage of multiple processors and multiple
cores when compressing data.
Original-Maintainer: Eduard Bloch <blade@debian.org>
Homepage: http://zlib.net/pigz/
Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.1.1-1build2
Provides: pinentry
Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.34), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
This package contains a program that allows for secure entry of PINs or
pass phrases. That means it tries to take care that the entered
information is not swapped to disk or temporarily stored anywhere.
This functionality is particularly useful for entering pass phrases
when using encryption software such as GnuPG or e-mail clients using
the same. It uses an open protocol and is therefore not tied to
particular software.
.
The program contained in this package implements a PIN entry dialog
using the curses tool kit, meaning that it is useful for users
working in text mode without the X Window System. There are sibling
packages that implement PIN entry dialogs that use an X tool kit. If
you install any of the graphical packages then this package is not
necessary because the sibling packages automatically fall back to
text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: pkexec
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 0.105-33
Replaces: policykit-1 (<< 0.105-32~)
Depends: polkitd (= 0.105-33), libc6 (>= 2.34), libglib2.0-0 (>= 2.35.9), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-33), libpolkit-gobject-1-0 (= 0.105-33)
Breaks: policykit-1 (<< 0.105-32~)
Description: run commands as another user with polkit authorization
polkit is an application-level toolkit for defining and handling the policy
that allows unprivileged processes to speak to privileged processes.
It was previously named PolicyKit.
.
pkexec is a setuid program to allow certain users to run commands as
root or as a different user, similar to sudo. Unlike sudo, it carries
out authentication and authorization by sending a request to polkit,
so it uses desktop environments' familiar prompting mechanisms for
authentication and uses polkit policies for authorization decisions.
.
By default, members of the 'sudo' Unix group can use pkexec to run any
command after authenticating. The authorization rules can be changed by
the local system administrator.
.
If this functionality is not required, removing the pkexec package will
reduce security risk by removing a setuid program.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Package: plocate
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.1.15-1ubuntu2
Replaces: mlocate (<< 1.1.7)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), liburing2 (>= 2.0), libzstd1 (>= 1.4.0)
Suggests: systemd-sysv | powermgmt-base, systemd-sysv | nocache
Breaks: mlocate (<< 1.1.7)
Conffiles:
/etc/cron.daily/plocate cc6eae6613eea45fd178b0ccfef6516b
/etc/updatedb.conf 999da456508a99a3b506aba238917a52
Description: much faster locate
plocate is a locate(1) based on posting lists, giving much faster searches
on a much smaller index. It is a drop-in replacement for mlocate in nearly
all aspects, and is fast on SSDs and non-SSDs alike.
Homepage: https://plocate.sesse.net/
Original-Maintainer: Steinar H. Gunderson <sesse@debian.org>
Package: plymouth
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 924
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.5+git20211018-1ubuntu3
Replaces: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Depends: init-system-helpers (>= 1.18), lsb-base (>= 3.0-6), systemd (>= 232-8~), udev (>= 232-8~), libc6 (>= 2.34), libdrm2 (>= 2.4.47), libplymouth5 (>= 0.9.5+git20211018-1ubuntu3)
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Suggests: desktop-base, plymouth-themes
Breaks: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Conflicts: console-common
Conffiles:
/etc/init.d/plymouth 707674e3b5b8fa048271dfe2490a0a09
/etc/init.d/plymouth-log 83b6676117e0e9b3f952e0fc625892ac
/etc/logrotate.d/bootlog 0f1e42d11052c238718996029ffb809b
Description: boot animation, logger and I/O multiplexer
Plymouth provides a boot-time I/O multiplexing framework - the most obvious
use for which is to provide an attractive graphical animation in place of
the text messages that normally get shown during boot. (The messages are
instead redirected to a logfile for later viewing.) However, in event-driven
boot systems Plymouth can also usefully handle user interaction such as
password prompts for encrypted file systems.
.
This package provides the basic framework, enabling a text-mode animation.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: plymouth-theme-ubuntu-text
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: plymouth
Version: 0.9.5+git20211018-1ubuntu3
Provides: plymouth-theme
Depends: libc6 (>= 2.17), libplymouth5 (>= 0.9.2), plymouth (= 0.9.5+git20211018-1ubuntu3), lsb-release
Description: boot animation, logger and I/O multiplexer - ubuntu text theme
Plymouth provides a boot-time I/O multiplexing framework - the most obvious
use for which is to provide an attractive graphical animation in place of
the text messages that normally get shown during boot. (The messages are
instead redirected to a logfile for later viewing.) However, in event-driven
boot systems Plymouth can also usefully handle user interaction such as
password prompts for encrypted file systems.
.
This package contains the default ubuntu-text text theme used when no
support for a graphical theme is found on your system.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: policykit-1
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.105-33
Depends: pkexec (= 0.105-33), polkitd (= 0.105-33)
Conffiles:
/etc/polkit-1/localauthority.conf.d/51-ubuntu-admin.conf c4dbd2117c52f367f1e8b8c229686b10 obsolete
/etc/polkit-1/localauthority.conf.d/50-localauthority.conf 2adb9d174807b0a3521fabf03792fbc8 obsolete
/etc/pam.d/polkit-1 7c794427f656539b0d4659b030904fe0 obsolete
Description: transitional package for polkitd and pkexec
polkit is an application-level toolkit for defining and handling the policy
that allows unprivileged processes to speak to privileged processes.
It was previously named PolicyKit.
.
This transitional package depends on polkitd, the system service used by
polkit, and pkexec, a setuid program analogous to sudo. They were
historically packaged together, but have been separated so that users of
polkitd are not required to install pkexec.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Package: polkitd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 520
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 0.105-33
Replaces: policykit-1 (<< 0.105-32~)
Provides: polkitd-pkla (= 0.105-33)
Depends: dbus, default-logind | logind, libc6 (>= 2.34), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-33), libpolkit-gobject-1-0 (= 0.105-33), libsystemd0 (>= 213)
Breaks: policykit-1 (<< 0.105-32~)
Conffiles:
/etc/pam.d/polkit-1 7c794427f656539b0d4659b030904fe0
/etc/polkit-1/localauthority.conf.d/50-localauthority.conf 2adb9d174807b0a3521fabf03792fbc8
/etc/polkit-1/localauthority.conf.d/51-ubuntu-admin.conf c4dbd2117c52f367f1e8b8c229686b10
Description: framework for managing administrative policies and privileges
PolicyKit is an application-level toolkit for defining and handling the policy
that allows unprivileged processes to speak to privileged processes.
.
It is a framework for centralizing the decision making process with respect to
granting access to privileged operations for unprivileged (desktop)
applications.
.
In a typical use of polkit, an unprivileged application such as gnome-disks
sends requests via D-Bus or other inter-process communication mechanisms
to a privileged system service such as udisks, which asks polkitd for
permission to process those requests. This allows the application to carry
out privileged tasks without making use of setuid, which avoids several
common sources of security vulnerabilities.
.
This package provides the polkitd D-Bus service and supporting programs.
The pkexec program is not included, and can be found in the pkexec package.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Package: pollinate
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.33-3ubuntu2
Replaces: pollen (<< 4.21-1)
Depends: curl, adduser, xxd | vim-common
Breaks: pollen (<< 4.21-1)
Conffiles:
/etc/default/pollinate a9f810379e139b53608f090ebd954954
/etc/pollinate/entropy.ubuntu.com.pem 9f437b2251c81f7ddf7624ac761ba249
Description: seed the pseudo random number generator
This client will connect to one or more Pollen (entropy-as-a-service)
servers over an (optionally) encrypted connection and retrieve a random
seed over HTTP or HTTPS.
This is particularly useful at the first boot of cloud images and in
virtual machines, to seed a system's random number generator at
genesis, and is intended to supplement the /etc/init.d/urandom init script.
It can be used on physical machines, as well, to supplement the seeding
of the pseudo random number generator.
Homepage: http://launchpad.net/pollinate
Original-Maintainer: Thorsten Alteholz <debian@alteholz.de>
Package: popularity-contest
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.71ubuntu3
Provides: popcon
Depends: debconf (>= 0.5) | debconf-2.0, dpkg (>= 1.10)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Recommends: gpg, cron | cron-daemon
Suggests: anacron, tor, torsocks
Conffiles:
/etc/cron.daily/popularity-contest bd6d91ce4e36bfb08beb2f85dcf8a65a
Description: Vote for your favourite packages automatically
Ubuntu no longer collects popularity-contest statistics. This
package is being kept for compatibility reasons.
.
The popularity-contest package sets up a cron job that will
periodically anonymously submit to the Debian developers
statistics about the most used Debian packages on this system.
.
This information helps Debian make decisions such as which packages
should go on the first CD. It also lets Debian improve future versions
of the distribution so that the most popular packages are the ones which
are installed automatically for new users.
Homepage: https://popcon.debian.org/
Original-Maintainer: Popularity Contest Developers <debian-popcon@lists.debian.org>
Package: postgresql
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: postgresql-common (238)
Version: 14+238
Depends: postgresql-14
Suggests: postgresql-doc
Description: object-relational SQL database (supported version)
This metapackage always depends on the currently supported PostgreSQL
database server version.
.
PostgreSQL is a fully featured object-relational database management
system. It supports a large part of the SQL standard and is designed
to be extensible by users in many aspects. Some of the features are:
ACID transactions, foreign keys, views, sequences, subqueries,
triggers, user-defined types and functions, outer joins, multiversion
concurrency control. Graphical user interfaces and bindings for many
programming languages are available as well.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: postgresql-14
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 43392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 14.15-0ubuntu0.22.04.1
Provides: postgresql-14-jit-llvm (= 14), postgresql-contrib-14
Depends: locales | locales-all, postgresql-client-14, postgresql-common (>= 229~), ssl-cert, tzdata, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgssapi-krb5-2 (>= 1.14+dfsg), libicu70 (>= 70.1-1~), libldap-2.5-0 (>= 2.5.4), libllvm14, liblz4-1 (>= 0.0~r130), libpam0g (>= 0.99.7.1), libpq5 (>= 14~~), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), libsystemd0, libuuid1 (>= 2.16), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4)
Recommends: sysstat
Description: The World's Most Advanced Open Source Relational Database
PostgreSQL, also known as Postgres, is a free and open-source relational
database management system (RDBMS) emphasizing extensibility and SQL
compliance. It features transactions with Atomicity, Consistency, Isolation,
Durability (ACID) properties, automatically updatable views, materialized
views, triggers, foreign keys, and stored procedures. It is designed to handle
a range of workloads, from single machines to data warehouses or Web services
with many concurrent users.
.
This package provides the database server for PostgreSQL 14.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Postgresql-Catversion: 202107181
Package: postgresql-client
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: postgresql-common (238)
Version: 14+238
Depends: postgresql-client-14
Description: front-end programs for PostgreSQL (supported version)
This metapackage always depends on the currently supported database
client package for PostgreSQL.
.
PostgreSQL is a fully featured object-relational database management
system. It supports a large part of the SQL standard and is designed
to be extensible by users in many aspects. Some of the features are:
ACID transactions, foreign keys, views, sequences, subqueries,
triggers, user-defined types and functions, outer joins, multiversion
concurrency control. Graphical user interfaces and bindings for many
programming languages are available as well.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: postgresql-client-14
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 3840
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: postgresql-14
Version: 14.15-0ubuntu0.22.04.1
Provides: postgresql-client
Depends: libpq5 (>= 14.15), postgresql-client-common (>= 182~), sensible-utils, libc6 (>= 2.34), libreadline8 (>= 6.0), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Suggests: postgresql-14, postgresql-doc-14
Description: front-end programs for PostgreSQL 14
This package contains client and administrative programs for
PostgreSQL: these are the interactive terminal client psql and
programs for creating and removing users and databases.
.
This is the client package for PostgreSQL 14. If you install
PostgreSQL 14 on a standalone machine, you need the server package
postgresql-14, too. On a network, you can install this package on
many client machines, while the server package may be installed on
only one machine.
.
PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: postgresql-client-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: postgresql-common
Version: 238
Depends: netbase, perl:any
Conffiles:
/etc/postgresql-common/supported_versions 71e93cbf6b710f422a5c54e9a63282a5
/etc/postgresql-common/user_clusters d2959e6ae6847342be07146ce06af33b
Description: manager for multiple PostgreSQL client versions
The postgresql-client-common package provides a structure under which
multiple versions of PostgreSQL client programs may be installed at
the same time. It provides a wrapper which selects the right version
for the particular cluster you want to access (with a command line
option, an environment variable, /etc/postgresql-common/user_clusters,
or ~/.postgresqlrc).
.
PostgreSQL is a fully featured object-relational database management
system. It supports a large part of the SQL standard and is designed
to be extensible by users in many aspects. Its features include ACID
transactions, foreign keys, views, sequences, subqueries, triggers,
outer joins, multiversion concurrency control, and user-defined types
and functions.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: postgresql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 238
Replaces: postgresql-server-dev-all (<< 204)
Depends: adduser, debconf (>= 0.5.00) | debconf-2.0, libjson-perl, lsb-base (>= 3.0-3), postgresql-client-common (= 238), ssl-cert (>= 1.0.11), ucf, perl:any
Recommends: e2fsprogs, logrotate
Breaks: postgresql-9.1 (<< 9.1.1-3~), postgresql-server-dev-all (<< 204)
Conffiles:
/etc/init.d/postgresql 1b9da643d7a403248d70e1776fb98458
/etc/logrotate.d/postgresql-common 101326ef5d138998692ece35109ef1a2
Description: PostgreSQL database-cluster manager
The postgresql-common package provides a structure under which
multiple versions of PostgreSQL may be installed and/or multiple
clusters maintained at one time.
.
The commands provided are pg_conftool, pg_createcluster, pg_ctlcluster,
pg_dropcluster, pg_lsclusters, pg_renamecluster, pg_upgradecluster,
pg_virtualenv.
.
PostgreSQL is a fully featured object-relational database management
system. It supports a large part of the SQL standard and is designed
to be extensible by users in many aspects. Its features include ACID
transactions, foreign keys, views, sequences, subqueries, triggers,
outer joins, multiversion concurrency control, and user-defined types
and functions.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: postgresql-contrib
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: postgresql-common (238)
Version: 14+238
Depends: postgresql-contrib-14
Description: additional facilities for PostgreSQL (supported version)
This metapackage always depends on the currently supported PostgreSQL
database contrib package.
.
PostgreSQL is a fully featured object-relational database management
system. It supports a large part of the SQL standard and is designed
to be extensible by users in many aspects. Some of the features are:
ACID transactions, foreign keys, views, sequences, subqueries,
triggers, user-defined types and functions, outer joins, multiversion
concurrency control. Graphical user interfaces and bindings for many
programming languages are available as well.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Package: powermgmt-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.36
Description: common utils for power management
This package ships "on_ac_power" which lets you determine whether
the system is powered from battery or an abundant supply. It's
recommended to use this tool over a simple sysfs check,
ConditionACPower or other ad-hoc methods which notoriously fail to
account for unobvious quirks, both old and new.
Original-Maintainer: Adam Borowski <kilobyte@angband.pl>
Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.17-6ubuntu2.1
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.34), libncurses6 (>= 6), libncursesw6 (>= 6), libprocps8 (>= 2:3.3.16-1), libtinfo6 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2), open-vm-tools (<= 2011.12.20-562307-1)
Conffiles:
/etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
/etc/sysctl.conf c0c09cba30da0565737cace8000d64ee
/etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
/etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
/etc/sysctl.d/10-kernel-hardening.conf f85fded186d1ad70c5f69ca6a88e4de6
/etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
/etc/sysctl.d/10-network-security.conf e2c60d912410543907a6c9ff21836ba8
/etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
/etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
/etc/sysctl.d/README.sysctl 48e64ce233c8aba8e0693adf8cf4c464
/etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f obsolete
/etc/init/procps.conf c273de3ebde8d4a50f17de17bb04a3e5 obsolete
/etc/init/procps-instance.conf 96170a339d08797dc90d69b01d6bf610 obsolete
Description: /proc file system utilities
This package provides command line and full screen utilities for browsing
procfs, a "pseudo" file system dynamically generated by the kernel to
provide information about the status of entries in its process table
(such as whether the process is running, stopped, or a "zombie").
.
It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>
Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 23.4-2build3
Replaces: manpages-de (<< 4.9.1-1)
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Breaks: manpages-de (<< 4.9.1-1)
Description: utilities that use the proc file system
This package contains miscellaneous utilities that use the proc FS:
.
- fuser: identifies processes that are using files or sockets.
- killall: kills processes by name (e.g. "killall -HUP named").
- peekfd: shows the data traveling over a file descriptor.
- pstree: shows currently running processes as a tree.
- prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 330
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20211207.1025-1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
A machine-readable list of domain name suffixes that accept public
registration. Each suffix represents the part of a domain name which
is not under the control of the individual registrant, which makes
the list useful for grouping cookies, deciding same-origin policies,
collating spam, and other activities.
Original-Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Homepage: https://publicsuffix.org
Package: python
Status: deinstall ok config-files
Priority: optional
Section: python
Installed-Size: 624
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.15~rc1-1
Config-Version: 2.7.15~rc1-1
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.15~rc1-1~), libpython-stdlib (= 2.7.15~rc1-1)
Pre-Depends: python-minimal (= 2.7.15~rc1-1)
Suggests: python-doc (= 2.7.15~rc1-1), python-tk (>= 2.7.15~rc1-1~)
Breaks: update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python version (currently v2.7).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/
Cnf-Extra-Commands: python
Cnf-Priority-Bonus: 3
Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-apt
Version: 2.4.0ubuntu2
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
The apt_pkg Python interface will provide full access to the internal
libapt-pkg structures allowing Python programs to easily perform a
variety of functions.
.
This package contains locales.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: python2.7-minimal
Status: deinstall ok config-files
Priority: optional
Section: python
Installed-Size: 3643
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python2.7
Version: 2.7.18-13ubuntu1.1
Config-Version: 2.7.18-13ubuntu1.1
Replaces: python2.7 (<< 2.7.8-7~)
Depends: libpython2.7-minimal (= 2.7.18-13ubuntu1.1)
Pre-Depends: libc6 (>= 2.35), zlib1g (>= 1:1.2.0)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 2.7)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
contained in this package.
Cnf-Visible-Pkgname: python2.7
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3
Status: install ok installed
Priority: important
Section: python
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.10 (>= 3.10.6-1~), libpython3-stdlib (= 3.10.6-1~22.04)
Pre-Depends: python3-minimal (= 3.10.6-1~22.04)
Suggests: python3-doc (>= 3.10.6-1~22.04), python3-tk (>= 3.10.6-1~), python3-venv (>= 3.10.6-1~22.04)
Description: interactive high-level object-oriented language (default python3 version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python 3 version (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/
Package: python3-apport
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 598
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.11-0ubuntu82.5
Depends: python3:any (>= 3.0~), python3-apt (>= 0.7.9), python3-httplib2, python3-problem-report (>= 0.94), lsb-release, python3-launchpadlib, python3-yaml
Recommends: apport
Description: Python 3 library for Apport crash report handling
This Python package provides high-level functions for creating and
handling apport crash reports:
.
* Query available and new reports.
* Add OS, packaging, and process runtime information to a report.
* Various frontend utility functions.
* Python hook to generate crash reports when Python scripts fail.
Homepage: https://wiki.ubuntu.com/Apport
Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 705
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 2.4.0ubuntu4
Replaces: python-apt (<< 0.7.98+nmu1)
Provides: python3.10-apt
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libapt-pkg6.0 (>= 1.9.11~), libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), python-apt-common, distro-info-data
Recommends: lsb-release, iso-codes
Suggests: python3-apt-dbg, python-apt-doc, apt
Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
The apt_pkg Python 3 interface will provide full access to the internal
libapt-pkg structures allowing Python 3 programs to easily perform a
variety of functions, such as:
.
- Access to the APT configuration system
- Access to the APT package information database
- Parsing of Debian package control files, and other files with a
similar structure
.
The included 'aptsources' Python interface provides an abstraction of
the sources.list configuration on the repository and the distro level.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-attrs
Version: 21.2.0-1
Depends: python3:any
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
attrs is an MIT-licensed Python package with class decorators that ease the
chores of implementing the most common attribute-related object protocols.
.
You just specify the attributes to work with and attrs gives you:
- a nice human-readable __repr__,
- a complete set of comparison methods,
- an initializer,
- and much more
without writing dull boilerplate code again and again.
.
This package contains attrs packaged for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://attrs.readthedocs.org/
Package: python3-automat
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: automat
Version: 20.2.0-1
Depends: python3-attr, python3-six, python3:any
Description: Self-service finite-state machines for the programmer on the go
Automat is a library for concise, idiomatic Python expression of
finite-state automata (particularly deterministic finite-state
transducers).
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/Automat
Package: python3-bcrypt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-bcrypt
Version: 3.2.0-1build1
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3-six (>= 1.4.1), python3:any, libc6 (>= 2.14)
Description: password hashing library for Python 3
bcrypt is a Python module which provides a password hashing method based on
the Blowfish password hashing algorithm, as described in
"A Future-Adaptable Password Scheme" by Niels Provos and David Mazieres:
http://static.usenix.org/events/usenix99/provos.html.
.
This package provides the bcrypt Python module for Python 3.x.
Homepage: https://github.com/pyca/bcrypt
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: blinker
Version: 1.4+dfsg1-0.4
Depends: python3:any
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
Blinker provides a fast dispatching system that allows any number of
interested parties to subscribe to events, or "signals".
.
Signal receivers can subscribe to specific senders or receive signals
sent by any sender.
.
This package contains the Python 3 version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://pythonhosted.org/blinker/
Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certifi
Version: 2020.6.20-1
Depends: ca-certificates, python3:any
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
Certifi is a carefully curated collection of Root Certificates for
validating the trustworthiness of SSL certificates while verifying
the identity of TLS hosts. It has been extracted from the Requests
project.
.
The version of certifi in this Debian package is patched to return
the location of Debian-provided CA certificates, instead of those
packaged by upstream.
.
This is the python3 package.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://github.com/certifi/python-certifi
Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python-cffi
Version: 1.15.0-1build2
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.11), python3 (>= 3.10~), libc6 (>= 2.34), libffi8 (>= 3.4)
Description: Foreign Function Interface for Python 3 calling C code - runtime
Convenient and reliable way of calling C code from Python 3.
.
The aim of this project is to provide a convenient and reliable way of calling
C code from Python. It keeps Python logic in Python, and minimises the C
required. It is able to work at either the C API or ABI level, unlike most
other approaches, that only support the ABI level.
.
This package contains the runtime support for pre-built cffi modules.
Homepage: https://cffi.readthedocs.org/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1068
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: chardet
Version: 4.0.0-1
Replaces: python-chardet (<< 3.0.4-6)
Depends: python3:any, python3-pkg-resources
Breaks: python-chardet (<< 3.0.4-6)
Description: universal character encoding detector for Python3
Chardet takes a sequence of bytes in an unknown character encoding, and
attempts to determine the encoding.
.
Supported encodings:
* ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
* Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
Chinese)
* EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
* EUC-KR, ISO-2022-KR (Korean)
* KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
* ISO-8859-2, windows-1250 (Hungarian)
* ISO-8859-5, windows-1251 (Bulgarian)
* windows-1252 (English)
* ISO-8859-7, windows-1253 (Greek)
* ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
* TIS-620 (Thai)
.
This library is a port of the auto-detection code in Mozilla.
.
This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet
Package: python3-click
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 366
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-click
Version: 8.0.3-1
Depends: python3-colorama, python3-importlib-metadata | python3 (>> 3.8), python3:any
Breaks: python3-click-threading (<< 0.5.0)
Description: Wrapper around optparse for command line utilities - Python 3.x
Click is a Python package for creating beautiful command line interfaces
in a composable way with as little code as necessary. It's the "Command
Line Interface Creation Kit". It's highly configurable but comes with
sensible defaults out of the box.
.
It aims to make the process of writing command line tools quick and fun
while also preventing any frustration caused by the inability to implement
an intended CLI API.
.
This is the Python 3 compatible package.
Original-Maintainer: Sandro Tosi <morph@debian.org>
Homepage: https://github.com/pallets/click
Package: python3-colorama
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-colorama
Version: 0.4.4-1
Depends: python3:any (>= 3.6~)
Description: Cross-platform colored terminal text in Python - Python 3.x
Python-colorama provides a simple cross-platform API to print colored terminal
text from Python applications.
.
ANSI escape character sequences are commonly used to produce colored terminal
text on Unix. Colorama provides some shortcuts to generate these sequences.
.
This has the happy side-effect that existing applications or libraries which
already use ANSI sequences to produce colored output on Linux.
.
This package provides the module for Python 3.
Original-Maintainer: Gürkan Myczko <gurkan@phys.ethz.ch>
Homepage: https://github.com/tartley/colorama
Package: python3-commandnotfound
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 59
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: command-not-found
Version: 22.04.0
Replaces: command-not-found (<< 0.3ubuntu7)
Depends: lsb-release, python3-apt, python3-gdbm, python3:any
Description: Python 3 bindings for command-not-found.
This package will install the Python 3 library for command_not_found tool.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>
Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: configobj
Version: 5.0.6-5
Depends: python3-six, python3:any
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
ConfigObj is a simple but powerful config file reader and writer: an
ini file round tripper. Its main feature is that it is very easy to
use, with a straightforward programmer's interface and a simple
syntax for config files. It has lots of other features, though:
.
* Nested sections (subsections), to any level
* List values
* Multiple line values
* String interpolation (substitution)
* Integrated with a powerful validation system
+ including automatic type checking/conversion
+ and allowing default values
+ repeated sections
* All comments in the file are preserved
* The order of keys/sections is preserved
* Full Unicode support
* Powerful unrepr mode for storing/retrieving Python data-types
.
This is the Python 3 version of the package.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: http://www.voidspace.org.uk/python/configobj.html
Package: python3-constantly
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: constantly
Version: 15.1.0-2
Depends: python3:any
Description: Symbolic constants in Python
A library that provides symbolic constant support. It includes
collections and constants with text, numeric, and bit flag
values.
.
Originally twisted.python.constants from the Twisted project.
.
This package provides the Python 3.x module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/twisted/constantly
Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1587
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cryptography
Version: 3.4.8-1ubuntu2
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Breaks: python3-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 3)
The cryptography library is designed to be a "one-stop-shop" for
all your cryptographic needs in Python.
.
As an alternative to the libraries that came before it, cryptography
tries to address some of the issues with those libraries:
- Lack of PyPy and Python 3 support.
- Lack of maintenance.
- Use of poor implementations of algorithms (i.e. ones with known
side-channel attacks).
- Lack of high level, "Cryptography for humans", APIs.
- Absence of algorithms such as AES-GCM.
- Poor introspectability, and thus poor testability.
- Extremely error prone APIs, and bad defaults.
.
This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>
Package: python3-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 417
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-python
Version: 1.2.18-3build1
Provides: python3.10-dbus
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.40)
Recommends: python3-gi
Suggests: python-dbus-doc
Description: simple interprocess messaging system (Python 3 interface)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
This package provides a Python 3 interface to D-Bus.
.
See the dbus description for more information about D-Bus in general.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python
Package: python3-debconf
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.79ubuntu1
Replaces: debconf (<< 1.5.64)
Depends: debconf (= 1.5.79ubuntu1), python3:any
Breaks: debconf (<< 1.5.64)
Description: interact with debconf from Python 3
Debconf is a configuration management system for debian packages. Packages
use Debconf to ask questions when they are installed.
.
This package provides a debconf module to allow Python 3 programs to
interact with a debconf frontend.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 553
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-debian
Version: 0.1.43ubuntu1.1
Depends: python3-chardet, zstd, python3:any
Recommends: python3-apt
Suggests: gpgv
Description: Python 3 modules to work with Debian-related data formats
This package provides Python 3 modules that abstract many formats of Debian
related files. Currently handled are:
* Debtags information (debian.debtags module)
* debian/changelog (debian.changelog module)
* Packages files, pdiffs (debian.debian_support module)
* Control files of single or multiple RFC822-style paragraphs, e.g.
debian/control, .changes, .dsc, Packages, Sources, Release, etc.
(debian.deb822 module)
* Raw .deb and .ar files, with (read-only) access to contained
files and meta-information
Homepage: https://salsa.debian.org/python-debian-team/python-debian
Original-Maintainer: Debian python-debian Maintainers <pkg-python-debian-maint@lists.alioth.debian.org>
Package: python3-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04
Replaces: python3 (<< 3.9.2-1~), python3.1 (<< 3.1.2+20100706-3)
Depends: python3 (= 3.10.6-1~22.04), libpython3-dev (= 3.10.6-1~22.04), python3.10-dev (>= 3.10.6-1~), python3-distutils (>= 3.10.6-1~), libjs-sphinxdoc (>= 4.3)
Breaks: python3 (<< 3.9.2-1~)
Description: header files and a static library for Python (default)
Header files, a static library and development tools for building
Python modules, extending the Python interpreter or embedding Python
in applications.
.
This package is a dependency package, which depends on Debian's default
Python 3 version's headers (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Built-Using: sphinx (= 4.3.2-1)
Homepage: https://www.python.org/
Package: python3-distro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-distro
Version: 1.7.0-1
Depends: lsb-release, python3:any
Description: Linux OS platform information API
distro (for: Linux Distribution) provides information about the Linux
distribution it runs on, such as a reliable machine-readable ID, or version
information.
.
It is a renewed alternative implementation for Python's original
platform.linux_distribution function, but it also provides much more
functionality which isn't necessarily Python bound like a command-line
interface.
.
This is the Python 3 version of the library.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/python-distro/distro
Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: distro-info
Version: 1.1ubuntu0.1
Depends: distro-info-data (>= 0.46), python3:any
Description: information about distributions' releases (Python 3 module)
Information about all releases of Debian and Ubuntu.
.
This package contains a Python 3 module for parsing the data in
distro-info-data. There is also a command line interface in the distro-info
package.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>
Package: python3-distupgrade
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 638
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:22.04.17
Replaces: python3-update-manager (<< 1:0.165)
Depends: python3:any, python3-update-manager (>= 1:19.04.2~), python3-apt (>= 0.8.5~), python3-dbus, python3-distro-info, python3-yaml, gpgv, lsb-release, sensible-utils, procps
Breaks: python3-update-manager (<< 1:0.165)
Description: manage release upgrades
This is the DistUpgrade Python 3 module
Package: python3-distutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 757
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2)
Provides: python3.10-distutils, python3.11-distutils
Depends: python3:any (>= 3.10.5-0~), python3:any (<< 3.12), python3-lib2to3 (= 3.10.8-1~22.04)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2), libpython3.8-stdlib (<< 3.8.0~b2-5)
Description: distutils package for Python 3.x
Distutils package for Python 3.x. This package contains the distutils module
from the Python standard library.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-docker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 537
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-docker
Version: 5.0.3-1
Depends: python3-distutils, python3-requests (>= 2.14.2~), python3-websocket (>= 0.32.0~), python3:any
Description: Python 3 wrapper to access docker.io's control socket
This package contains oodles of routines that aid in controlling
docker.io over it's socket control, the same way the docker.io
client controls the daemon.
.
This package provides Python 3 module bindings only.
Original-Maintainer: Docker Compose Team <team+docker-compose@tracker.debian.org>
Homepage: https://github.com/docker/docker-py
Package: python3-dockerpty
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: dockerpty
Version: 0.4.1-2
Depends: python3-six, python3:any
Recommends: python3-docker (>= 0.7.1)
Description: Pseudo-tty handler for docker Python client (Python 3.x)
Provides the functionality needed to operate the pseudo-tty (PTY) allocated to
a docker container, using the Python client.
.
This package provides Python 3.x version of dockerpty.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/d11wtq/dockerpty
Package: python3-docopt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: docopt
Version: 0.6.2-4
Depends: python3:any
Description: command-line interface description language (Python3)
docopt helps you define an interface for your command-line app and
automatically generate a parser for it. Its interface descriptions are
based on a formalization of the standard conventions used in help
messages and man pages.
.
This is the Python 3 compatible version of the package.
Original-Maintainer: Agustin Henze <tin@debian.org>
Homepage: http://docopt.org
Package: python3-dotenv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-dotenv
Version: 0.19.2-1
Depends: python3:any
Description: Get and set values in the .env file in local and production servers
Reads key value pairs from the .env file and adds them to environment.
variables. It is useful to manage settings during development and in
production following the 12-factor principles: http://12factor.net/
The executable is named python-dotenv
Original-Maintainer: Federico Ceratto <federico@debian.org>
Homepage: https://github.com/theskumar/python-dotenv
Package: python3-gdbm
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Provides: python3.10-gdbm, python3.11-gdbm
Depends: python3 (>= 3.10.5-0~), python3 (<< 3.12), libc6 (>= 2.4), libgdbm6 (>= 1.16)
Suggests: python3-gdbm-dbg
Description: GNU dbm database support for Python 3.x
GNU dbm database module for Python 3.x. Install this if you want to
create or read GNU dbm database files with Python.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 747
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: pygobject
Version: 3.42.1-0ubuntu1
Depends: gir1.2-glib-2.0 (>= 1.48.0), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.62.0-4~), libgirepository-1.0-1-with-libffi8 (>= 1.62.0-4~), libglib2.0-0 (>= 2.56.0)
Description: Python 3 bindings for gobject-introspection libraries
GObject is an abstraction layer that allows programming with an object
paradigm that is compatible with many languages. It is a part of Glib,
the core library used to build GTK+ and GNOME.
.
This package contains the Python 3 binding generator for libraries that
support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
package. With these packages, the libraries can be used from Python 3.
Homepage: https://wiki.gnome.org/Projects/PyGObject
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: python3-gpg
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1294
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gpgme1.0
Version: 1.16.0-1.2ubuntu4.1
Provides: python3.10-gpg
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libgpgme11 (>= 1.15.0)
Description: Python interface to the GPGME GnuPG encryption library (Python 3)
The "gpg" Python module is, for the most part, a direct interface to
the C GPGME library. However, it is re-packaged in a more Pythonic
way -- object-oriented with classes and modules. Take a look at the
classes defined here -- they correspond directly to certain object
types in GPGME for C.
.
Features:
* Feature-rich, full implementation of the GPGME library. Supports
all GPGME features except interactive editing (coming soon).
Callback functions may be written in pure Python.
* Ability to sign, encrypt, decrypt, and verify data.
* Ability to list keys, export and import keys, and manage the keyring.
* Fully object-oriented with convenient classes and modules.
.
This is the official upstream Python 3 binding for GPGME.
Homepage: https://www.gnupg.org/related_software/gpgme/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: python3-hamcrest
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 166
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyhamcrest
Version: 2.0.2-2
Depends: python3:any
Description: Hamcrest framework for matcher objects (Python 3)
PyHamcrest is a framework for writing matcher objects, allowing you to
declaratively define "match" rules. There are a number of situations where
matchers are invaluable, such as UI validation, or data filtering, but it is in
the area of writing flexible tests that matchers are most commonly used. This
tutorial shows you how to use PyHamcrest for unit testing.
.
When writing tests it is sometimes difficult to get the balance right between
overspecifying the test (and making it brittle to changes), and not specifying
enough (making the test less valuable since it continues to pass even when the
thing being tested is broken). Having a tool that allows you to pick out
precisely the aspect under test and describe the values it should have, to a
controlled level of precision, helps greatly in writing tests that are
"just right." Such tests fail when the behavior of the aspect under test
deviates from the expected behavior, yet continue to pass when minor,
unrelated changes to the behaviour are made.
.
This package provides the Python 3.x modules.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: http://hamcrest.org/
Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-httplib2
Version: 0.20.2-2
Depends: ca-certificates, python3-pyparsing, python3:any
Breaks: python3-pysimplesoap (<< 1.16-2.1), python3-wsgi-intercept (<< 1.9.0)
Description: comprehensive HTTP client library written for Python3
httplib2.py supports many features left out of other HTTP libraries.
* HTTP and HTTPS
* Keep-Alive
* Authentication
* Caching
* All Methods
* Redirects
* Compression
* Lost update support
* Unit Tested
.
This package provides module for python3 series.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/httplib2/httplib2
Package: python3-hyperlink
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: hyperlink
Version: 21.0.0-3
Depends: python3-idna (>= 2.5), python3:any
Description: Immutable, Pythonic, correct URLs.
Hyperlink provides a pure-Python implementation of immutable URLs. Based on
RFC 3986 and 3987, the Hyperlink URL makes working with both URIs and IRIs
easy.
.
This package provides the Python 3.x module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/python-hyper/hyperlink
Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 299
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-idna
Version: 3.3-1
Depends: python3:any
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
A library to support the Internationalised Domain Names in Applications (IDNA)
protocol as specified in RFC 5891. This version of the protocol is often
referred to as “IDNA2008” and can produce different results from the earlier
standard from 2003.
.
The library is also intended to act as a suitable drop-in replacement for the
“encodings.idna” module that comes with the Python standard library but
currently only supports the older 2003 specification.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/kjd/idna
Package: python3-importlib-metadata
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-importlib-metadata
Version: 4.6.4-1
Depends: python3-zipp (>= 0.5), python3:any
Description: library to access the metadata for a Python package - Python 3.x
Provides an API for accessing an installed package’s metadata, such as its
entry points or its top-level name. This functionality intends to replace
most uses of pkg_resources entry point API and metadata API.
.
This package contains Python 3.x module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/python/importlib_metadata
Package: python3-incremental
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: incremental
Version: 21.3.0-1
Depends: python3:any
Recommends: python3-click, python3-twisted
Description: Library for versioning Python projects
Incremental is a small library that versions your Python projects.
.
This package provides the Python 3.x module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/twisted/incremental
Package: python3-jeepney
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 186
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: jeepney
Version: 0.7.1-3
Depends: python3:any
Description: pure Python D-Bus interface
Jeepney is a pure Python implementation of D-Bus messaging. It has an
I/O-free core, and integration modules for different event loops.
.
D-Bus is an inter-process communication system, mainly used in Linux.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://gitlab.com/takluyver/jeepney
Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 259
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jsonschema
Version: 3.2.0-0ubuntu2
Depends: python3-attr, python3-pkg-resources, python3-setuptools, python3-six (>= 1.11.0), python3-importlib-metadata, python3-pyrsistent, python3:any
Suggests: python-jsonschema-doc
Description: An(other) implementation of JSON Schema (Draft 3 and 4) - Python 3.x
JSON Schema is a specification for a JSON-based format for defining
the structure of JSON data. JSON Schema provides a contract for what
JSON data is required for a given application and how it can be
modified, much like what XML Schema provides for XML. JSON Schema is
intended to provide validation, documentation, and interaction control
of JSON data.
.
This package contains the Python 3.x module.
Original-Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Homepage: https://github.com/Julian/jsonschema
Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyjwt
Version: 2.3.0-1ubuntu0.2
Depends: python3:any
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
PyJWT implements the JSON Web Token draft 01, a way of representing
signed content using JSON data structures.
.
Supported algorithms for cryptographic signing:
.
* HS256 - HMAC using SHA-256 hash algorithm (default)
* HS384 - HMAC using SHA-384 hash algorithm
* HS512 - HMAC using SHA-512 hash algorithm
* RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
algorithm
* RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
algorithm
* RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
algorithm
.
Supported reserved claim names:
- "exp" (Expiration Time) Claim
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-keyring
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-keyring
Version: 23.5.0-1
Depends: python3-importlib-metadata (>= 3.6), python3-jeepney (>= 0.4.2), python3-secretstorage (>= 3.2), python3:any
Suggests: gir1.2-secret-1, gnome-keyring, libkf5wallet-bin, python3-dbus, python3-gi, python3-keyrings.alt
Breaks: python3-keyrings.alt (<< 3.1), python3-wheel (<< 0.27)
Description: store and access your passwords safely
The Python keyring library provides an easy way to access the system
keyring service (e.g Gnome-Keyring, KWallet) from Python.
It can be used in any application that needs safe password storage.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/jaraco/keyring
Package: python3-launchpadlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1762
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-launchpadlib
Version: 1.10.16-1
Depends: python3-httplib2, python3-keyring, python3-lazr.restfulclient, python3-lazr.uri, python3:any
Suggests: python3-pkg-resources, python3-testresources
Description: Launchpad web services client library (Python 3)
A free Python library for scripting Launchpad through its web services
interface.
.
It currently provides access to the following parts of Launchpad:
* People and Teams
* Team memberships
* Bugs and bugtasks
.
The Launchpad API is currently in beta, and may well change in ways
incompatible with this library.
.
This package is for Python 3.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/launchpadlib
Package: python3-lazr.restfulclient
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lazr.restfulclient
Version: 0.14.4-1
Depends: python3-httplib2 (>= 0.7.7), python3-lazr.uri, python3-wadllib (>= 1.1.4), python3-distro, python3-oauthlib, python3-pkg-resources, python3-six, python3:any
Description: client for lazr.restful-based web services (Python 3)
A programmable client library that takes advantage of the commonalities
among lazr.rest web services to provide added functionality on top
of wadllib.
.
This package is for Python 3.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/lazr.restfulclient
Package: python3-lazr.uri
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lazr.uri
Version: 1.0.6-2
Depends: python3-importlib-metadata | python3 (>> 3.8), python3-pkg-resources, python3:any
Description: library for parsing, manipulating, and generating URIs
A self-contained, easily reusable, Python library for parsing,
manipulating and generating URIs. With it you can extract parts
of a URL, compare URIs to see if one contains another, search for
URIs in text, and many other things.
.
This package contains the library for Python 3.x.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/lazr.uri
Package: python3-ldb
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 173
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ldb
Version: 2:2.4.4-0ubuntu0.22.04.2
Depends: libldb2 (= 2:2.4.4-0ubuntu0.22.04.2), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libpython3.10 (>= 3.10.0), libtalloc2 (>= 2.3.1~)
Description: Python 3 bindings for LDB
ldb is a LDAP-like embedded database built on top of TDB.
.
This package contains the Python 3 bindings.
Homepage: https://ldb.samba.org/
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: python3-lib2to3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Provides: python3.10-lib2to3, python3.11-lib2to3
Depends: python3:any (>= 3.10.5-0~), python3:any (<< 3.12)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Description: Interactive high-level object-oriented language (lib2to3)
Python is a high-level, interactive, object-oriented language. It
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the lib2to3 library, a Python2 to Python3 converter.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-magic
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-magic
Version: 2:0.4.24-2
Depends: python3:any, libmagic1 (>= 1:5.39)
Description: python3 interface to the libmagic file type identification library
python-magic is a Python interface to the libmagic file type
identification library. libmagic identifies file types by checking
their headers according to a predefined list of file types. This
functionality is exposed to the command line by the Unix command file.
.
This package provides the Python 3 version of the python-magic module.
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Homepage: https://github.com/ahupp/python-magic/
Package: python3-minimal
Status: install ok installed
Priority: important
Section: python
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.10-minimal (>= 3.10.6-1~)
Description: minimal subset of the Python language (default python3 version)
This package contains the interpreter and some essential modules. It's used
in the boot process for some basic tasks.
See /usr/share/doc/python3.10-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3
Package: python3-more-itertools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 226
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: more-itertools
Version: 8.10.0-2
Depends: python3:any
Description: library with routines for operating on iterables, beyond itertools (Python 3)
Python's itertools library is a gem - you can compose elegant solutions
for a variety of problems with the functions it provides.
More-itertools collects additional building blocks, recipes,
and routines for working with Python iterables.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/more-itertools/more-itertools/
Package: python3-netifaces
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: netifaces
Version: 0.11.0-1build2
Depends: python3 (<< 3.11), python3 (>= 3.10~), libc6 (>= 2.4)
Description: portable network interface information - Python 3.x
netifaces provides a (hopefully portable-ish) way for Python programmers to
get access to a list of the network interfaces on the local machine, and to
obtain the addresses of those network interfaces.
.
This package contains the module for Python 3.x.
Homepage: https://alastairs-place.net/projects/netifaces/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-newt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.21-5ubuntu2
Provides: python3.10-newt
Depends: libnewt0.52 (= 0.52.21-5ubuntu2), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.4)
Description: NEWT module for Python3
This module allows you to build a text UI for your Python3 scripts
using newt.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 556
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-oauthlib
Version: 3.2.0-1ubuntu0.1
Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
OAuthLib is a generic utility which implements the logic of OAuth without
assuming a specific HTTP request object. It can be used to graft OAuth support
onto HTTP libraries.
.
OAuth 1 is fully supported per the RFC for both clients and providers.
.
OAuth 2 client and provider support for:
.
- Authorization Code Grant
- Implicit Grant
- Client Credentials Grant
- Resource Owner Password Credentials Grant
- Refresh Tokens
- Bearer Tokens
- Draft MAC tokens
- Token Revocation
- OpenID Connect Authentication
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyopenssl
Version: 21.0.0-1
Depends: python3-cryptography (>= 3.3), python3-six (>= 1.5.2), python3:any
Suggests: python-openssl-doc, python3-openssl-dbg
Description: Python 3 wrapper around the OpenSSL library
High-level wrapper around a subset of the OpenSSL library, includes
.
* SSL.Connection objects, wrapping the methods of Python's portable
sockets
* Callbacks written in Python
* Extensive error-handling mechanism, mirroring OpenSSL's error
codes
.
A lot of the object methods do nothing more than calling a
corresponding function in the OpenSSL library.
.
This package contains the Python 3 version of pyopenssl.
Original-Maintainer: Sandro Tosi <morph@debian.org>
Homepage: https://pyopenssl.org/
Package: python3-pexpect
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pexpect
Version: 4.8.0-2ubuntu1
Depends: python3-ptyprocess, python3:any
Suggests: python-pexpect-doc
Description: Python 3 module for automating interactive applications
Pexpect is a pure Python 3 module for spawning child applications;
controlling them; and responding to expected patterns in their
output. Pexpect works like Don Libes' Expect. Pexpect allows your
script to spawn a child application and control it as if a human were
typing commands.
Homepage: https://github.com/pexpect/pexpect
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-pip
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6878
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-pip
Version: 22.0.2+dfsg-1ubuntu0.4
Replaces: python-pip
Provides: pip
Depends: ca-certificates, python3-distutils, python3-setuptools, python3-wheel, python3:any
Recommends: build-essential, python3-dev (>= 3.2)
Breaks: python-pip
Description: Python package installer
pip is the Python package installer. It integrates with virtualenv, doesn't
do partial installs, can save package state for replaying, can install from
non-egg sources, and can install from version control repositories.
.
This is the Python 3 version of the package.
Homepage: https://pip.pypa.io/en/stable/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-pip-whl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1781
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-pip
Version: 22.0.2+dfsg-1ubuntu0.4
Replaces: python-pip-whl (<< 21.3.1+dfsg-2~)
Depends: ca-certificates
Breaks: python-pip-whl (<< 21.3.1+dfsg-2~)
Description: Python package installer (pip wheel)
pip is the Python package installer. It integrates with virtualenv, doesn't
do partial installs, can save package state for replaying, can install from
non-egg sources, and can install from version control repositories.
.
This is the support package for the PEP 427 wheel version of the package,
required for using pip inside a virtual environment.
Homepage: https://pip.pypa.io/en/stable/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 580
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.1
Depends: python3:any
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
The pkg_resources module provides an API for Python libraries to
access their resource files, and for extensible applications and
frameworks to automatically discover plugins. It also provides
runtime support for using C extensions that are inside zipfile-format
eggs, support for merging packages that have separately-distributed
modules or subpackages, and APIs for managing Python's current
"working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-problem-report
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.11-0ubuntu82.5
Depends: python3:any (>= 3.0~)
Description: Python 3 library to handle problem reports
This Python library provides an interface for creating, modifying,
and accessing standardized problem reports for program and kernel
crashes and packaging bugs.
.
These problem reports use standard Debian control format syntax
(RFC822).
Homepage: https://wiki.ubuntu.com/Apport
Package: python3-ptyprocess
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ptyprocess
Version: 0.7.0-3
Depends: python3:any
Description: Run a subprocess in a pseudo terminal from Python 3
Launch a subprocess in a pseudo terminal (pty), and interact with both
the process and its pty.
.
Sometimes, piping stdin and stdout is not enough. There might be a password
prompt that doesn't read from stdin, output that changes when it's going to
a pipe rather than a terminal, or curses-style interfaces that rely on a
terminal. If you need to automate these things, running the process in a
pseudo terminal (pty) is the answer.
.
This package installs the library for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/pexpect/ptyprocess
Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 390
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyasn1
Version: 0.4.8-1
Depends: python3:any
Breaks: python3-pysnmp4 (<< 4.3.4)
Description: ASN.1 library for Python (Python 3 module)
This is an implementation of ASN.1 types and codecs in Python
programming language. It has been first written to support particular
protocol (SNMP) but then generalized to be suitable for a wide range
of protocols based on ASN.1 specification.
.
This package contains the Python 3 module.
Original-Maintainer: Jan Lübbe <jluebbe@debian.org>
Homepage: http://snmplabs.com/pyasn1/index.html
Package: python3-pyasn1-modules
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 363
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-pyasn1-modules
Version: 0.2.1-1
Depends: python3-pyasn1 (>= 0.4.1), python3-pyasn1 (<< 0.5.0), python3:any
Description: Collection of protocols modules written in ASN.1 language (Python 3)
This is a small but growing collection of ASN.1 data structures
expressed in Python terms using pyasn1 data model.
.
It's thought to be useful to protocol developers and testers.
.
Please note that pyasn1_modules is neither part of the pyasn1 package
nor related to it.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://pypi.python.org/pypi/pyasn1-modules
Package: python3-pycurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 196
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pycurl
Version: 7.44.1-4build1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.15), libcurl3-gnutls (>= 7.81.0)
Suggests: libcurl4-gnutls-dev, python-pycurl-doc
Description: Python bindings to libcurl (Python 3)
This module provides the Python bindings to libcurl. Please refer to
the libcurl documentation available in libcurl4-gnutls-dev Debian package.
.
NOTE: the SSL support is provided by GnuTLS.
.
This package contains PyCURL for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: http://pycurl.sourceforge.net
Package: python3-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 298
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyparsing
Version: 2.4.7-1
Depends: python3:any
Suggests: python-pyparsing-doc
Description: alternative to creating and executing simple grammars - Python 3.x
The parsing module is an alternative approach to creating and
executing simple grammars, vs. the traditional lex/yacc approach, or
the use of regular expressions. The parsing module provides a
library of classes that client code uses to construct the grammar
directly in Python code.
.
Here's an example:
.
from pyparsing import Word, alphas
greet = Word(alphas) + "," + Word(alphas) + "!"
hello = "Hello, World!"
print hello, "->", greet.parseString(hello)
.
This package contains the Python 3.x version of python-pyparsing.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/pyparsing/pyparsing/
Package: python3-pyrsistent
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pyrsistent
Version: 0.18.1-1build1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14)
Description: persistent/functional/immutable data structures for Python
Pyrsistent is a number of persistent collections (sometimes referred
to as functional data structures). Persistent in the sense that they
are immutable.
.
All methods on a data structure that would normally mutate it instead
return a new copy of the structure containing the requested updates.
The original structure is left untouched.
.
The collection types and key features currently implemented are:
.
* PVector, similar to a python list
* PMap, similar to dict
* PSet, similar to set
* PRecord, a PMap on steroids with fixed fields, optional type and
invariant checking and much more
* PClass, a Python class fixed fields, optional type and invariant
checking and much more
* Checked collections, PVector, PMap and PSet with optional type
and invariance checks and more
* PBag, similar to collections.Counter
* PList, a classic singly linked list
* PDeque, similar to collections.deque
* Immutable object type (immutable) built on the named tuple
* freeze and thaw functions to convert between pythons standard
collections and pyrsistent collections.
* Flexible transformations of arbitrarily complex structures built
from PMaps and PVectors.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/tobgu/pyrsistent/
Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.25.1+dfsg-2ubuntu0.1
Depends: python3-certifi, python3-chardet (>= 3.0.2), python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
multipart files, and parameters with simple Python dictionaries, and access
the response data in the same way. It's powered by httplib and urllib3, but
it does all the hard work and crazy hacks for you.
.
Features
.
- International Domains and URLs
- Keep-Alive & Connection Pooling
- Sessions with Cookie Persistence
- Browser-style SSL Verification
- Basic/Digest Authentication
- Elegant Key/Value Cookies
- Automatic Decompression
- Unicode Response Bodies
- Multipart File Uploads
- Connection Timeouts
.
This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-samba
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 21084
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Provides: python3.10-samba
Depends: python3-ldb (>= 2:2.1.0), python3-tdb, samba-libs (= 2:4.15.13+dfsg-0ubuntu1.5), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.34), libgnutls30 (>= 3.7.0), libldb2 (>= 2:2.4.4-0ubuntu0.22.04.2~), libpython3.10 (>= 3.10.0), libtalloc2 (>= 2.3.3~), libtevent0 (>= 0.11.0~), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5), python3-talloc (>= 2.3.1~)
Recommends: python3-gpg
Description: Python 3 bindings for Samba
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file sharing with Microsoft Windows, OS X,
and other Unix systems. Samba can also function as a domain controller
or member server in both NT4-style and Active Directory domains.
.
This package contains Python 3 bindings for most Samba libraries.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: python3-secretstorage
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-secretstorage
Version: 3.3.1-1
Depends: dbus, python3-jeepney (>= 0.6), python3-cryptography (>= 2.0), python3:any
Suggests: gnome-keyring (>= 2.30), python-secretstorage-doc
Description: Python module for storing secrets - Python 3.x version
Python-SecretStorage provides a way for securely storing passwords
and other secrets.
.
It uses D-Bus Secret Service API that is supported by GNOME Keyring
(>= 2.30) and KSecretsService.
.
It allows one to create, edit and delete secret items, manipulate
secret collections, and search for items matching given attributes.
It also supports locking and unlocking collections.
.
This package provides Python 3.x version of SecretStorage.
Original-Maintainer: Dmitry Shachnev <mitya57@debian.org>
Homepage: https://github.com/mitya57/secretstorage
Package: python3-service-identity
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-service-identity
Version: 18.1.0-6
Depends: python3-attr, python3-cryptography, python3-pyasn1, python3-pyasn1-modules, python3:any
Recommends: python3-idna
Description: Service identity verification for pyOpenSSL (Python 3 module)
Service_identity aspires to give you all the tools you need for verifying
whether a certificate is valid for the intended purposes.
.
In the simplest case, this means host name verification. However,
service_identity implements RFC 6125 fully and plans to add other
relevant RFCs too.
.
This package contains service_identity for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/service_identity
Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1747
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.1
Depends: python3-pkg-resources (= 59.6.0-1.2ubuntu0.22.04.1), python3-distutils, python3:any
Suggests: python-setuptools-doc
Description: Python3 Distutils Enhancements
Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-setuptools-whl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1007
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.1
Replaces: python-pip-whl (<< 21.3.1+dfsg-2~)
Breaks: python-pip-whl (<< 21.3.1+dfsg-2~)
Description: Python Distutils Enhancements (wheel package)
Extensions to the python-distutils for large or complex distributions.
.
This is the support package for the PEP 427 wheel version of the package,
required for using setuptools inside a virtual environment.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.16.0-3ubuntu1
Depends: python3:any
Breaks: libpython-stdlib (<< 2.7.18), python-minimal (<< 2.7.18)
Description: Python 2 and 3 compatibility library (Python 3 interface)
Six is a Python 2 and 3 compatibility library. It provides utility
functions for smoothing over the differences between the Python versions
with the goal of writing Python code that is compatible on both Python
versions.
.
This package provides Six on the Python 3 module path. It is complemented
by python-six and pypy-six.
Homepage: https://github.com/benjaminp/six
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-software-properties
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 175
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.99.22.9
Depends: gpg, iso-codes, lsb-release, python3, python3-apt (>= 0.6.20ubuntu16), python3-gi, python3-launchpadlib, python3:any
Recommends: unattended-upgrades
Description: manage the repositories that you install software from
This software provides an abstraction of the used apt repositories.
It allows you to easily manage your distribution and independent software
vendor software sources.
Package: python3-systemd
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-systemd
Version: 234-3ubuntu2
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.17), libsystemd0 (>= 246)
Description: Python 3 bindings for systemd
This package contains Python 3 bindings for native access to the
systemd facilities.
.
Functionality is separated into a number of modules:
* systemd.journal supports sending of structured messages to the
journal and reading journal files
* systemd.daemon wraps parts of libsystemd useful for writing daemons
and socket activation
* systemd.id128 provides functions for querying machine and boot
identifiers and a list of message identifiers provided by systemd
* systemd.login wraps parts of libsystemd used to query logged in
users and available seats and machines
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: python3-talloc
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: talloc
Version: 2.3.3-2build1
Provides: python3.10-talloc
Depends: libtalloc2 (= 2.3.3-2build1), python3 (<< 3.11), python3 (>= 3.10~), libc6 (>= 2.4), libpython3.10 (>= 3.10.0)
Description: hierarchical pool based memory allocator - Python3 bindings
A hierarchical pool based memory allocator with destructors. It uses
reference counting to determine when memory should be freed.
.
This package contains the Python 3 bindings.
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Homepage: https://talloc.samba.org/
Package: python3-tdb
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: tdb
Version: 1.4.5-2build1
Provides: python3.10-tdb
Depends: libtdb1 (= 1.4.5-2build1), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.4)
Description: Python3 bindings for TDB
This is a simple database API. It is modelled after the structure
of GDBM. TDB features, unlike GDBM, multiple writers support with
appropriate locking and transactions.
.
This package contains the Python3 bindings.
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Homepage: https://tdb.samba.org/
Package: python3-texttable
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texttable
Version: 1.6.4-1
Depends: python3:any
Description: Module for creating simple ASCII tables — python3
texttable is a module to generate a formatted text table, using ASCII
characters.
It provides nice human-readable output for arrays when designing
a CLI or just output data.
.
This package contains the Python 3 module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/foutaise/texttable
Package: python3-twisted
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 12662
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: twisted
Version: 22.1.0-2ubuntu2.3
Replaces: python3-twisted-experimental
Depends: python3-bcrypt (>= 3.0.0), python3-cryptography (>= 2.5), python3-hamcrest, python3-idna, python3-openssl, python3-service-identity (>= 18.1.0), python3-attr (>= 19.2.0), python3-automat (>= 0.8.0), python3-constantly, python3-hyperlink, python3-incremental (>= 21.3.0), python3-zope.interface (>= 4.4.2), python3:any
Suggests: python3-pampy, python3-serial, python3-tk, python3-wxgtk4.0
Breaks: python3-h2 (<< 3.0.0), python3-treq (<< 20.9.0)
Conflicts: python3-twisted-experimental
Description: Event-based framework for internet applications
It includes a web server, a telnet server, a multiplayer RPG engine, a
generic client and server for remote object access, and APIs for creating
new protocols.
Homepage: https://twistedmatrix.com/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-update-manager
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:22.04.10
Replaces: update-manager-core (<< 1:0.163)
Depends: python3:any (>= 3.2~), python3-apt (>= 0.8.5~), python3-distro-info, python3-distupgrade, lsb-release
Suggests: python3-launchpadlib
Breaks: python3-distupgrade (<< 1:16.10.10), update-manager-core (<< 1:0.163)
Description: python 3.x module for update-manager
Python module for update-manager (UpdateManager).
.
This package contains the python 3.x version of this module.
Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-urllib3
Version: 1.26.5-1~exp1ubuntu0.1
Depends: python3:any, python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
urllib3 supports features left out of urllib and urllib2 libraries.
.
- Re-use the same socket connection for multiple requests (HTTPConnectionPool
and HTTPSConnectionPool) (with optional client-side certificate
verification).
- File posting (encode_multipart_formdata).
- Built-in redirection and retries (optional).
- Supports gzip and deflate decoding.
- Thread-safe and sanity-safe.
- Small and easy to understand codebase perfect for extending and
building upon.
.
This package contains the Python 3 version of the library.
Homepage: https://urllib3.readthedocs.org
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-wadllib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 365
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-wadllib
Version: 1.3.6-1
Depends: python3-lazr.uri, python3-pkg-resources, python3:any
Description: Python 3 library for navigating WADL files
The Web Application Description Language (WADL) is an XML vocabulary for
describing the capabilities of HTTP resources. wadllib can be used in
conjunction with an HTTP library to navigate and manipulate those resources.
.
This package provides wadllib for Python 3.x.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/wadllib
Package: python3-websocket
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: websocket-client
Version: 1.2.3-1
Depends: python3:any
Description: WebSocket client library - Python 3.x
websocket-client provides a low-level, synchronous API providing WebSocket
client functionality to Python programs. It conforms to the WebSocket
specification as standardized by the IETF in RFC 6455.
.
WebSocket is a protocol providing full-duplex communication channels over
TCP, mostly used in Web browsers.
.
This package provides the Python 3.x version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/liris/websocket-client
Package: python3-wheel
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: wheel
Version: 0.37.1-2ubuntu0.22.04.1
Depends: python3-distutils, python3:any
Suggests: python3-setuptools
Description: built-package format for Python
A wheel is a ZIP-format archive with a specially formatted filename and the
`.whl` extension. It is designed to contain all the files for a PEP 376
compatible install in a way that is very close to the on-disk format.
.
The wheel project provides a `bdist_wheel` command for setuptools. Wheel
files can be installed with `pip`.
.
This is the Python 3 compatible package.
Homepage: https://github.com/pypa/wheel
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 529
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: pyyaml
Version: 5.4.1-1ubuntu1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libyaml-0-2
Breaks: libpython-stdlib (<< 2.7.18), python-minimal (<< 2.7.18), python-yaml (<< 5.3.1-2)
Description: YAML parser and emitter for Python3
Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can
parse all examples from the specification. The parsing algorithm is simple
enough to be a reference for YAML parser implementors. A simple extension API
is also provided. The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Package: python3-zipp
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-zipp
Version: 1.0.0-3
Depends: python3-more-itertools, python3:any
Description: pathlib-compatible Zipfile object wrapper - Python 3.x
A backport of the Path object to older versions of Python.
It's pathlib-compatible interface for zip files using zipfile object inside.
.
This package contains Python 3.x module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/jaraco/zipp
Package: python3-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 961
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: zope.interface
Version: 5.4.0-1build1
Provides: python3-zope, python3.10-zope.interface
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3-pkg-resources, python3:any, libc6 (>= 2.4)
Description: Interfaces for Python3
This package provides an implementation of object interfaces for Python.
Interfaces are a mechanism for labeling objects as conforming to a given API
or contract. So, this package can be considered as implementation of the
Design By Contract methodology support in Python.
.
This is the Python 3 version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/zopefoundation/zope.interface
Package: python3.10
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 633
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.10.12-1~22.04.3
Depends: python3.10-minimal (= 3.10.12-1~22.04.3), libpython3.10-stdlib (= 3.10.12-1~22.04.3), media-types | mime-support
Suggests: python3.10-venv, python3.10-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.10)
Python is a high-level, interactive, object-oriented language. Its 3.10 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3.10-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 510
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: python3.10 (= 3.10.12-1~22.04.3), libpython3.10-dev (= 3.10.12-1~22.04.3), libpython3.10 (= 3.10.12-1~22.04.3)
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.10)
Header files, a static library and development tools for building
Python (v3.10) modules, extending the Python interpreter or embedding
Python (v3.10) in applications.
.
Maintainers of Python packages should read README.maintainers.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3.10-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5898
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: libpython3.10-minimal (= 3.10.12-1~22.04.3), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.10
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.10)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.10-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Cnf-Visible-Pkgname: python3.10
Package: python3.10-venv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.10
Version: 3.10.12-1~22.04.3
Depends: python3.10 (= 3.10.12-1~22.04.3), python3-pip-whl, python3-setuptools-whl, python3.10-distutils
Breaks: python3-pip (<< 1.5.6-4)
Description: Interactive high-level object-oriented language (pyvenv binary, version 3.10)
Python is a high-level, interactive, object-oriented language. Its 3.10 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the pyvenv-3.10 binary.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3.12
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 180
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.12.7-1+jammy1
Depends: python3.12-minimal (= 3.12.7-1+jammy1), libpython3.12-stdlib (= 3.12.7-1+jammy1), mime-support
Suggests: python3.12-venv, binutils
Description: Interactive high-level object-oriented language (version 3.12)
Python is a high-level, interactive, object-oriented language. Its 3.12 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Package: python3.12-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 502
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: python3.12 (= 3.12.7-1+jammy1), libpython3.12-dev (= 3.12.7-1+jammy1), libpython3.12 (= 3.12.7-1+jammy1), libexpat1-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.12)
Header files, a static library and development tools for building
Python (v3.12) modules, extending the Python interpreter or embedding
Python (v3.12) in applications.
.
Maintainers of Python packages should read README.maintainers.
Package: python3.12-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 7835
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: libpython3.12-minimal (= 3.12.7-1+jammy1), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.12
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.12)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.12-minimal/README.Debian for a list of the modules
contained in this package.
Cnf-Visible-Pkgname: python3.12
Package: python3.12-venv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1801
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.12
Version: 3.12.7-1+jammy1
Depends: python3.12 (= 3.12.7-1+jammy1)
Breaks: python3-pip (<< 1.5.6-4)
Description: Interactive high-level object-oriented language (pyvenv binary, version 3.12)
Python is a high-level, interactive, object-oriented language. Its 3.12 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the pyvenv-3.12 binary.
Package: python3.5-minimal
Status: deinstall ok config-files
Priority: important
Section: python
Installed-Size: 8837
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.5
Version: 3.5.2-2ubuntu0~16.04.13
Config-Version: 3.5.2-2ubuntu0~16.04.13
Depends: libpython3.5-minimal (= 3.5.2-2ubuntu0~16.04.13), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.17)
Recommends: python3.5
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.5)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3.8
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 513
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.8.19-1+jammy1
Depends: python3.8-minimal (= 3.8.19-1+jammy1), libpython3.8-stdlib (= 3.8.19-1+jammy1), mime-support
Suggests: python3.8-venv, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.8)
Python is a high-level, interactive, object-oriented language. Its 3.8 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Package: python3.8-dbg
Status: install ok installed
Priority: optional
Section: debug
Installed-Size: 33083
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: python3.8 (= 3.8.19-1+jammy1), libpython3.8-dbg (= 3.8.19-1+jammy1), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Recommends: gdb
Suggests: python3.8-gdbm-dbg, python3.8-tk-dbg
Description: Debug Build of the Python Interpreter (version 3.8)
The package holds two things:
.
- A Python interpreter configured with --pydebug. Dynamically loaded modules
are searched as <foo>_d.so first. Third party extensions need a separate
build to be used by this interpreter.
- Debug information for standard python interpreter and extensions.
.
See the README.debug for more information.
Build-Ids: 124ee9a556a364e6f0b05afc98d4dc9ee5d227b7 12acf89c7b3b554f1e6ba1a7c591c87f97f3902a 194a36ccea0fa0f49b9fffe1f35f55165c5db46f 19f24e8e0b1928077505ec81882d0b0ae77054f4 1f6ca131ad8a983635317f8f07a70f286acc0dce 21b269f876447f097dec7f7e2d95321a6aa2a1dd 3234f5d062fbf57e4b8bec244fe3cf2bdfc98892 32c02c0a76e5fd50c32bc122ac4bc63ade05db44 33ffead043e04536842f735d179289aa3a680620 39af1b07592480518a644d1dd65aeb57c3bd0083 3cabc5d447752469ad170a826a6e9e0c605f2be7 4680ed38a67004ac8f8450c3951623e005d6e53d 4be7c02bf54d1569f3a13e044c81cd674c0bd2c3 54694cd2d607d9060a31f55ebfb2da6025cc8804 5584d59c989ae7cd35b2a1106504a73dd55ee116 5f7a189d2a987356c8f72fe8ca0643b06771a5f0 5fd34310fa0ac80c5e42a35cb6a0296844a2cd2c 615f25a4d387a5257e32926caa41a18aae54373a 629adbd8df2c8c655c6a6e984598019745ce1c01 62a4f8fb95e1bd3be23fc2b897c010228744b1ab 6d4fd8388851643d332bf3e84c2ab7194a45d8ed 70e4b777026f3265f5c0d93730f5bca342bcc6c4 723ab7958dc71756a297b089c0ff10a315d4ae64 7478e89e115daf65956e54ded40a2175950a5596 7b69699909ae065d98effe2a61181236929c576f 7efeae1d1df20f7b8d5b4ab99e66c83cced36f6c 8877a7bd3e101e0c4fc698c0d53df9e7b57f26a8 8b6108f243392085376d2be4476ac5913ffe093f 9142803767659445b62329ef2b59f03f975b78c5 9260ef9db9bd64e217c559581ebe5c66b61c1459 98da0898ef82d8eb3d00fb3672b36b37dcdc4127 99c86c0cb1a6ea57c048273339d927097a089e0e 9b6bbcabba60594bdadd97864376404cee6d0a6a 9bebc00138ee35d59640ef6096ba9f953546d108 a2a411945ec630d4c12d00f7b00c0b6db6758717 a5bca1365d224ac50f782f49a0eb6fc71563a369 ae84ac8e170bb3277037d3e9d49093507ddfab64 aff29370143b4cdc4ee794fd1e693179c81213aa c385c81362c0ba9eb16a9b60bb459e3d2f2c9220 cb5a867979b69226984e9093817749e73f5fc901 cb6085ac12209b8e7f2e3eb277241e09f366e955 dda88213816dee5349cf417689660e7d64175684 e03b1da9a47150dce2c01548b5732ce36201d138 e227ba8c855f0432900e9be710e2236b62b99695 f107fb9b2b5e38606fd75335ab34a92df329ce6c fb66807a4a6849f36cf2384372f20aa4fc15f621
Package: python3.8-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 504
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: python3.8 (= 3.8.19-1+jammy1), libpython3.8-dev (= 3.8.19-1+jammy1), libpython3.8 (= 3.8.19-1+jammy1), libexpat1-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.8)
Header files, a static library and development tools for building
Python (v3.8) modules, extending the Python interpreter or embedding
Python (v3.8) in applications.
.
Maintainers of Python packages should read README.maintainers.
Package: python3.8-distutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 769
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: python3.8-lib2to3 (>= 3.6.4)
Description: distutils package for Python (version 3.8)
Distutils package for Python (version 3.8). This package contains the
distutils module from the Python standard library.
Package: python3.8-lib2to3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 439
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python3.8
Version: 3.8.19-1+jammy1
Description: lib2to3 package for Python (version 3.8)
Lib2to3 package for Python (version 3.8). This package contains the
lib2to3 module from the Python standard library.
Package: python3.8-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5150
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: libpython3.8-minimal (= 3.8.19-1+jammy1), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.8
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.8)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.8-minimal/README.Debian for a list of the modules
contained in this package.
Cnf-Visible-Pkgname: python3.8
Package: python3.8-venv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2800
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.8
Version: 3.8.19-1+jammy1
Depends: python3.8 (= 3.8.19-1+jammy1), python3.8-distutils
Breaks: python3-pip (<< 1.5.6-4)
Description: Interactive high-level object-oriented language (pyvenv binary, version 3.8)
Python is a high-level, interactive, object-oriented language. Its 3.8 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the pyvenv-3.8 binary.
Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.1.2-1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: redis-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: redis
Version: 5:6.0.16-1ubuntu1
Depends: lsb-base (>= 3.2-14), redis-tools (= 5:6.0.16-1ubuntu1)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
/etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05
/etc/init.d/redis-server 1bfb59d75734b81577d86875778427fd
/etc/logrotate.d/redis-server f4b38d0bd720dea3edc8b96b8502447d
/etc/redis/redis.conf 83199d2075f4136ef2b7bc5488150bbe
Description: Persistent key-value database with network interface
Redis is a key-value database in a similar vein to memcache but the dataset
is non-volatile. Redis additionally provides native support for atomically
manipulating and querying data structures such as lists and sets.
.
The dataset is stored entirely in memory and periodically flushed to disk.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <lamby@debian.org>
Package: redis-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 4063
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: redis
Version: 5:6.0.16-1ubuntu1
Replaces: redis-server (<< 2:2.6.16-1)
Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.34), libjemalloc2 (>= 2.1.1), liblua5.1-0, liblzf1 (>= 1.5), libssl3 (>= 3.0.0~~alpha1), libsystemd0, lua-bitop, lua-cjson
Suggests: ruby-redis
Breaks: redis-server (<< 2:2.6.16-1)
Description: Persistent key-value database with network interface (client)
Redis is a key-value database in a similar vein to memcache but the dataset
is non-volatile. Redis additionally provides native support for atomically
manipulating and querying data structures such as lists and sets.
.
This package contains the command line client and other tools.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <lamby@debian.org>
Package: rename
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.30-1
Depends: perl:any
Description: Perl extension for renaming multiple files
This package provides both a perl interface for renaming files
(File::Rename) and a command line tool 'rename' which is intended to
replace the version that used to be supplied by the perl package.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-Rename
Package: resolvconf
Status: install ok installed
Priority: important
Section: net
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.84ubuntu1
Depends: lsb-base (>= 4.1+Debian3), debconf (>= 0.5) | debconf-2.0
Breaks: dhcp3-client (<< 4.1.1-P1-15+squeeze1), dnscache-run, sysv-rc (<< 2.88dsf-42)
Enhances: dhcpcd, dnsmasq, ifupdown, isc-dhcp-client, libc6, network-manager, nscd, pdnsd, ppp, pump, udhcpc
Conffiles:
/etc/dhcp/dhclient-enter-hooks.d/resolvconf a2bd0970281b4dc4dcbcf6d1fc44c90c
/etc/init.d/resolvconf 98b70e5ff3e146b633ba3cbe1feeec20
/etc/network/if-down.d/resolvconf 7e3f037a117b52c4169365a95f676262
/etc/network/if-up.d/000resolvconf a4c967dcc7741dbd89bc6d4e821a8559
/etc/ppp/ip-down.d/000resolvconf e50ecd8f5226bebba46e1eab652a4169
/etc/ppp/ip-up.d/000resolvconf 8cda84dd75e71467394378a6a71edcd6
/etc/resolvconf/interface-order 9431a58c5e7d90e7e1835b290172e168
/etc/resolvconf/resolv.conf.d/base d41d8cd98f00b204e9800998ecf8427e
/etc/resolvconf/resolv.conf.d/head 06363a4f7e346b8d87d410c83b16dd7f
/etc/resolvconf/update.d/libc c714cc4467b58fa15680a49faedf7a41
Description: name server information handler
Resolvconf is a framework for keeping up to date the system's
information about name servers. It sets itself up as the intermediary
between programs that supply this information (such as ifup and
ifdown, DHCP clients, the PPP daemon and local name servers) and
programs that use this information (such as DNS caches and resolver
libraries).
.
This package may require some manual configuration. Please
read the README file for detailed instructions.
Homepage: http://alioth.debian.org/projects/resolvconf/
Original-Maintainer: resolvconf team <team+resolvconf@tracker.debian.org>
Package: rpcbind
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.2.6-2build1
Replaces: libc-bin (<< 2.16)
Provides: portmap
Depends: libc6 (>= 2.34), libsystemd0, libtirpc3 (>= 1.0.2), libwrap0 (>= 7.6-4~), lsb-base (>= 4.1+Debian3), adduser
Pre-Depends: init-system-helpers (>= 1.54~)
Breaks: libc-bin (<< 2.16)
Conflicts: portmap
Conffiles:
/etc/default/rpcbind ee5f5f475d29ec8c38c391eeedf12e1b
/etc/init.d/rpcbind 82c496e6e05c60a4f9523e880036d0e7
/etc/insserv.conf.d/rpcbind 669a5c3a6ffa8b5b5ce263057934d118
Description: converts RPC program numbers into universal addresses
The rpcbind utility is a server that converts RPC program numbers
into universal addresses.
Original-Maintainer: Josue Ortega <josue@debian.org>
Homepage: http://sourceforge.net/projects/rpcbind/
Package: rpcsvc-proto
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.2-0ubuntu6
Replaces: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Depends: libc6 (>= 2.34)
Breaks: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Description: RPC protocol compiler and definitions
rpcgen is a tool that generates C code to implement an RPC protocol. The input
to rpcgen is a language similar to C known as RPC Language (Remote Procedure
Call Language).
.
This package also includes several rpcsvc header files and RPC protocol
definitions from SunRPC sources that were previously shipped by glibc.
Homepage: https://github.com/thkukuk/rpcsvc-proto
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 794
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.7-0ubuntu0.22.04.2
Depends: lsb-base, libacl1 (>= 2.2.23), libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3 (>= 3.0.0~~alpha1), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
/etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
/etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
rsync is a fast and versatile file-copying tool which can copy locally
and to/from a remote host. It offers many options to control its behavior,
and its remote-update protocol can minimize network traffic to make
transferring updates between machines fast and efficient.
.
It is widely used for backups and mirroring and as an improved copy
command for everyday use.
.
This package provides both the rsync command line tool and optional
daemon functionality.
Homepage: https://rsync.samba.org/
Original-Maintainer: Paul Slootman <paul@debian.org>
Package: rsyslog
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.2112.0-2ubuntu2.2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.34), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.8), libsystemd0 (>= 246), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), adduser, ucf
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-openssl | rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp, apparmor (>= 2.8.96~2541-0ubuntu4~)
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
/etc/apparmor.d/usr.sbin.rsyslogd 648eb046586f8a0d7f2ca87ba836bd14
/etc/logcheck/ignore.d.server/rsyslog 80e9fc074b97751dd4de99855bb8d0e0
/etc/logrotate.d/rsyslog 46de15167e065fe1d21b8cd9accc2c48
/etc/rsyslog.conf 8f03326e3d7284ef50ac6777ef8a4fb8
Description: reliable system and kernel logging daemon
Rsyslog is a multi-threaded implementation of syslogd (a system utility
providing support for message logging), with features that include:
* reliable syslog over TCP, SSL/TLS and RELP
* on-demand disk buffering
* email alerting
* writing to MySQL or PostgreSQL databases (via separate output plugins)
* permitted sender lists
* filtering on any part of the syslog message
* on-the-wire message compression
* fine-grained output format control
* failover to backup destinations
* enterprise-class encrypted syslog relaying
.
It is the default syslogd on Debian systems.
Homepage: https://www.rsyslog.com/
Original-Maintainer: Michael Biebl <biebl@debian.org>
Package: run-one
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 44
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 1.17-0ubuntu1
Replaces: bikeshed (<< 1.8)
Depends: procps
Breaks: bikeshed (<< 1.8)
Enhances: anacron, cron
Description: run just one instance of a command and its args at a time
This utility will run just one instance at a time of some command and
unique set of arguments (useful for cronjobs, eg).
Homepage: http://launchpad.net/run-one
Package: samba-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 316
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Depends: ucf, debconf (>= 0.5) | debconf-2.0
Pre-Depends: dpkg (>= 1.15.6~)
Recommends: samba-common-bin
Conffiles:
/etc/dhcp/dhclient-enter-hooks.d/samba 1efd89702e41ccd9219bc1765a8a12c6
/etc/pam.d/samba a69b859744494a52ecf10bb604544093
/etc/samba/gdbcommands 898c523d1c11feeac45538a65d00c838
Description: common files used by both the Samba server and client
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file and printer sharing with
Microsoft Windows, OS X, and other Unix systems.
.
This package contains common files used by all parts of Samba.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: samba-common-bin
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1730
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Depends: python3, python3-samba, samba-common (= 2:4.15.13+dfsg-0ubuntu1.5), samba-libs (= 2:4.15.13+dfsg-0ubuntu1.5), python3:any, libbsd0 (>= 0.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.0), libldap-2.5-0 (>= 2.5.4), libncurses6 (>= 6), libpopt0 (>= 1.14), libreadline8 (>= 6.0), libtalloc2 (>= 2.3.3~), libtdb1 (>= 1.4.4~), libtevent0 (>= 0.11.0~), libtinfo6 (>= 6), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5)
Recommends: samba-dsdb-modules
Suggests: heimdal-clients, python3-markdown, python3-dnspython
Description: Samba common files used by both the server and the client
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file sharing with Microsoft Windows, OS X,
and other Unix systems. Samba can also function as a domain controller
or member server in both NT4-style and Active Directory domains.
.
This package contains the common files that are used by both the server
(provided in the samba package) and the client (provided in the samba-clients
package).
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: samba-dsdb-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1673
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Depends: libgpgme11 (>= 1.2.0), samba-libs (= 2:4.15.13+dfsg-0ubuntu1.5), libldb2 (<< 2:2.4.5~), libldb2 (>= 2:2.4.4-0ubuntu0.22.04.2), libbsd0 (>= 0.0), libc6 (>= 2.33), libcrypt1 (>= 1:4.1.0), libgnutls30 (>= 3.7.0), libtalloc2 (>= 2.3.3~), libtdb1 (>= 1.4.4~), libtevent0 (>= 0.11.0~), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5)
Enhances: libldb2
Description: Samba Directory Services Database
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file sharing with Microsoft Windows, OS X,
and other Unix systems. Samba can also function as a domain controller
or member server in both NT4-style and Active Directory domains.
.
This package contains LDB plugins which add support for various Active
Directory features to the LDB library.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: samba-libs
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 24845
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Replaces: libndr-standard0 (<< 2:4.0.9), libsamba-credentials0 (<< 2:4.0.9), libsamba-hostconfig0 (<< 2:4.0.9), libsamba-util0 (<< 2:4.0.9), samba (<< 2:4.3.3+dfsg-1)
Depends: libacl1 (>= 2.2.23), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libbsd0 (>= 0.5.0), libc6 (>= 2.34), libcap2 (>= 1:2.10), libcups2 (>= 1.7.0), libgnutls30 (>= 3.7.3), libjansson4 (>= 2.1), libldap-2.5-0 (>= 2.5.4), libldb2 (>= 2:2.4.4-0ubuntu0.22.04.2), libpam0g (>= 0.99.7.1), libpopt0 (>= 1.14), libpython3.10 (>= 3.10.0), libtalloc2 (>= 2.3.3~), libtdb1 (>= 1.4.4~), libtevent0 (>= 0.11.0~), libtirpc3 (>= 1.0.2), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5), python3-ldb (>= 2:2.1.0), python3-talloc (>= 2.3.1~), zlib1g (>= 1:1.1.4)
Breaks: libndr-standard0 (<< 2:4.0.9), libsamba-credentials0 (<< 2:4.0.9), libsamba-hostconfig0 (<< 2:4.0.9), libsamba-util0 (<< 2:4.0.9), sssd-ad-common (<< 2.3.0)
Description: Samba core libraries
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file sharing with Microsoft Windows, OS X,
and other Unix systems. Samba can also function as a domain controller
or member server in both NT4-style and Active Directory domains.
.
This package contains the shared libraries.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: sbsigntool
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.9.4-2ubuntu2
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), libuuid1 (>= 2.16)
Description: Tools to manipulate signatures on UEFI binaries and drivers
This package installs tools which can cryptographically sign EFI binaries and
drivers.
Original-Maintainer: Debian EFI Team <debian-efi@lists.debian.org>
Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 1005
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.9.0-1
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libtinfo6 (>= 6), libutempter0 (>= 1.1.5)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
/etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
/etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
GNU Screen is a terminal multiplexer that runs several separate "screens" on
a single physical character-based terminal. Each virtual terminal emulates a
DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
can be detached and resumed later on a different terminal.
.
Screen also supports a whole slew of other features, including configurable
input and output translation, serial port support, configurable logging,
and multi-user support.
Original-Maintainer: Axel Beckert <abe@debian.org>
Homepage: https://savannah.gnu.org/projects/screen
Package: secureboot-db
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 29
Maintainer: Steve Langasek <steve.langasek@ubuntu.com>
Architecture: amd64
Version: 1.8
Depends: sbsigntool
Description: Secure Boot updates for DB and DBX
Systems with Secure Boot enabled have portions of the system signed by entries
in the Secure Boot DB. This package provides a mechanism for delivering
updates to DB and the corresponding blacklist database, DBX.
Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8-1ubuntu2
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
sed reads the specified files or the standard input if no
files are specified, makes editing changes according to a
list of commands, and writes the results to the standard
output.
Homepage: https://www.gnu.org/software/sed/
Original-Maintainer: Clint Adams <clint@debian.org>
Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.17
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
This package provides a number of small utilities which are used
by programs to sensibly select and spawn an appropriate browser,
editor, or pager.
.
The specific utilities included are: sensible-browser sensible-editor
sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: session-migration
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 50
Maintainer: Didier Roche <didrocks@ubuntu.com>
Architecture: amd64
Version: 0.3.6
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.51.1), init-system-helpers (>= 1.52)
Description: Tool to migrate in user session settings
This tool is used to migrate in session user data when a program is evolving
its configuration, or needing to have files moved and so on.
.
This program is generally autostarted at the very beginning of the session
and integrates caching capability.
Homepage: https://launchpad.net/session-migration
Package: sg3-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2790
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.46-1ubuntu0.22.04.1
Replaces: sg-utils
Depends: libc6 (>= 2.34), libsgutils2-2 (>= 1.46)
Conflicts: cdwrite, sg-utils
Description: utilities for devices using the SCSI command set
Most OSes have SCSI pass-through interfaces that enable user space programs
to send SCSI commands to a device and fetch the response. With SCSI to ATA
Translation (SAT) many ATA disks now can process SCSI commands. Typically
each utility in this package implements one SCSI command. See the draft
standards at www.t10.org for SCSI command definitions plus SAT. ATA
commands are defined in the draft standards at www.t13.org . For a mapping
between supported SCSI and ATA commands and utility names in this package
see the COVERAGE file.
Homepage: http://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Package: sg3-utils-udev
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: sg3-utils
Version: 1.46-1ubuntu0.22.04.1
Depends: sg3-utils, initramfs-tools-core, initramfs-tools | linux-initramfs-tool
Description: utilities for devices using the SCSI command set (udev rules)
Most OSes have SCSI pass-through interfaces that enable user space programs
to send SCSI commands to a device and fetch the response. With SCSI to ATA
Translation (SAT) many ATA disks now can process SCSI commands. Typically
each utility in this package implements one SCSI command. See the draft
standards at www.t10.org for SCSI command definitions plus SAT. ATA
commands are defined in the draft standards at www.t13.org . For a mapping
between supported SCSI and ATA commands and utility names in this package
see the COVERAGE file.
.
udev rules which are associated with the utilities in the sg3-utils package.
Homepage: http://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.30
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
This package creates the SGML infrastructure directories and provides
SGML catalog file support in compliance with the current Debian SGML
Policy draft:
.
* infrastructure directories:
- /etc/sgml
- /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
- /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
.
* update-catalog(8): tool for maintaining the root SGML catalog
file and the package SGML catalog files in the '/etc/sgml' directory.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 2744
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1-2
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
This is the shared MIME-info database from the X Desktop Group. It is required
by any program complying to the Shared MIME-Info Database spec, which is also
included in this package.
.
At this time at least ROX, GNOME, KDE and Xfce use this database.
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info
Package: slirp4netns
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.1-2
Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.28.0), libseccomp2 (>= 0.0.0~20120605), libslirp0 (>= 4.1.0)
Description: User-mode networking for unprivileged network namespaces
slirp4netns provides user-mode networking for unprivileged network
namespaces.
.
slirp4netns allows connecting a network namespace to the Internet in a
completely unprivileged way, by connecting a TAP device in a network
namespace to the usermode TCP/IP stack ("slirp").
Original-Maintainer: Reinhard Tartler <siretart@tauware.de>
Homepage: https://github.com/rootless-containers/slirp4netns
Package: smbclient
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: samba
Version: 2:4.15.13+dfsg-0ubuntu1.5
Provides: samba-client
Depends: samba-common (= 2:4.15.13+dfsg-0ubuntu1.5), samba-libs (= 2:4.15.13+dfsg-0ubuntu1.5), libarchive13 (>= 3.0.4), libbsd0 (>= 0.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.0), libpopt0 (>= 1.14), libreadline8 (>= 6.0), libsmbclient (>= 2:4.10.0+dfsg), libtalloc2 (>= 2.3.3~), libtevent0 (>= 0.11.0~), libwbclient0 (= 2:4.15.13+dfsg-0ubuntu1.5)
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: cifs-utils, heimdal-clients
Description: command-line SMB/CIFS clients for Unix
Samba is an implementation of the SMB/CIFS protocol for Unix systems,
providing support for cross-platform file and printer sharing with
Microsoft Windows, OS X, and other Unix systems.
.
This package contains command-line utilities for accessing Microsoft
Windows and Samba servers, including smbclient, smbtar, and smbspool.
Utilities for mounting shares locally are found in the package
cifs-utils.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Package: snapd
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 100049
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.58+22.04.1
Replaces: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Depends: adduser, apparmor (>= 2.10.95-0ubuntu2.2), ca-certificates, openssh-client, squashfs-tools, systemd, udev, libc6 (>= 2.34), libfuse3-3 (>= 3.2.3), liblzma5 (>= 5.1.1alpha+20110809), liblzo2-2 (>= 2.02), libudev1 (>= 183), zlib1g (>= 1:1.1.4), default-dbus-session-bus | dbus-session-bus
Recommends: gnupg, fuse3 (>= 3.10.5-1) | fuse
Suggests: zenity | kdialog
Breaks: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Conflicts: snap (<< 2013-11-29-1ubuntu1)
Conffiles:
/etc/apparmor.d/usr.lib.snapd.snap-confine.real b7e64e65a9b069d8007643335eb07608
/etc/apt/apt.conf.d/20snapd.conf dd6f6ce79792eecd4a57bdde4e6fff7d
/etc/profile.d/apps-bin-path.sh cf10aed8bb987ded8b7f4ba4303c1e9b
/etc/xdg/autostart/snap-userd-autostart.desktop 4aaaa2fe36462a072a72e09cad553362
Description: Daemon and tooling that enable snap packages
Install, configure, refresh and remove snap packages. Snaps are
'universal' packages that work across many different Linux systems,
enabling secure distribution of the latest apps and utilities for
cloud, servers, desktops and the internet of things.
.
Start with 'snap list' to see installed snaps.
Built-Using: apparmor (= 3.0.4-2ubuntu2), libcap2 (= 1:2.44-1build3), libseccomp (= 2.5.3-2ubuntu2)
Homepage: https://github.com/snapcore/snapd
Package: software-properties-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 220
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.99.22.9
Replaces: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Depends: ca-certificates, gir1.2-glib-2.0, gir1.2-packagekitglib-1.0 (>= 1.1.0-2), packagekit, python-apt-common (>= 0.9), python3, python3-dbus, python3-gi, python3-software-properties (= 0.99.22.9), python3:any
Breaks: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Conffiles:
/etc/dbus-1/system.d/com.ubuntu.SoftwareProperties.conf cc3c01a5b5e8e05d40c9c075f44c43ea
Description: manage the repositories that you install software from (common)
This software provides an abstraction of the used apt repositories.
It allows you to easily manage your distribution and independent software
vendor software sources.
.
This package contains the common files for software-properties like the
D-Bus backend.
Package: sosreport
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1944
Maintainer: Nikhil Kshirsagar <nikhil.kshirsagar@canonical.com>
Architecture: amd64
Version: 4.5.6-0ubuntu1~22.04.2
Depends: python3-pexpect, python3-yaml, python3:any, python3-magic
Conffiles:
/etc/sos/sos.conf afbb6b104e5e905315fb573db86c1e0b
/etc/sos.conf 5d35541d70c49cb27306ed0ec94472d5 obsolete
Description: Set of tools to gather troubleshooting data from a system
Sos is a set of tools that gathers information about system
hardware and configuration. The information can then be used for
diagnostic purposes and debugging. Sos is commonly used to help
support technicians and developers.
Homepage: https://github.com/sosreport/sos
Package: squashfs-tools
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.5-3build1
Depends: libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), liblzo2-2 (>= 2.02), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Description: Tool to create and append to squashfs filesystems
Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
compression to compress both files, inodes and directories. Inodes in the
system are very small and all blocks are packed to minimise data overhead.
Block sizes greater than 4K are supported up to a maximum of 64K.
.
Squashfs is intended for general read-only filesystem use, for archival use
(i.e. in cases where a .tar.gz file may be used), and in constrained block
device/memory systems (e.g. embedded systems) where low overhead is needed.
Homepage: https://github.com/plougher/squashfs-tools
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: ssh-import-id
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.11-0ubuntu1
Depends: ca-certificates, openssh-client, python3-distro, wget, python3:any
Recommends: openssh-server
Conffiles:
/etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11
Description: securely retrieve an SSH public key and install it locally
This utility will securely contact a public keyserver (Launchpad.net by
default, but Github.com is also supported), retrieve one or more user's
public keys, and append these to the current user's ~/.ssh/authorized_keys
file.
Homepage: http://launchpad.net/ssh-import-id
Original-Maintainer: Andrew Starr-Bochicchio <asb@debian.org>
Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.1.2
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
This package enables unattended installs of packages that
need to create SSL certificates.
.
It is a simple wrapper for OpenSSL's certificate request utility that
feeds it with the correct user variables.
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2000
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.16-0ubuntu3
Depends: libc6 (>= 2.34), libunwind8
Description: System call tracer
strace is a system call tracer: i.e. a debugging tool which prints out
a trace of all the system calls made by another process/program.
The program to be traced need not be recompiled for this, so you can
use it on binaries for which you don't have source.
.
System calls and signals are events that happen at the user/kernel
interface. A close examination of this boundary is very useful for bug
isolation, sanity checking and attempting to capture race conditions.
Homepage: https://strace.io
Original-Maintainer: Steve McIntyre <93sam@debian.org>
Package: sudo
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.9.9-1ubuntu2.4
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.0.2), libpam-modules, lsb-base
Conflicts: sudo-ldap
Conffiles:
/etc/pam.d/sudo b3a1b916bf62a2cc3280f7f9b94844ff
/etc/pam.d/sudo-i ce9740f66cedf7716e26950abfe556fa
/etc/sudo.conf efb56b1b282fa4cad1b6c0f05137bb08
/etc/sudo_logsrvd.conf 09ceda2c98f43e0fbb79bed7c82dba45
/etc/sudoers 791aa979aa5e859f9ba0112a9512158c
/etc/sudoers.d/README 44c75ff004a18eeefdde4c998914d6d3
Description: Provide limited super user privileges to specific users
Sudo is a program designed to allow a sysadmin to give limited root
privileges to users and log root activity. The basic philosophy is to give
as few privileges as possible but still allow people to get their work done.
.
This version is built with minimal shared library dependencies, use the
sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/
Original-Maintainer: Sudo Maintainers <sudo@packages.debian.org>
Package: sysstat
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1472
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.5.2-2ubuntu0.2
Depends: lsb-base (>= 3.0-6), ucf (>= 2.003), xz-utils, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libsensors5 (>= 1:3.5.0)
Recommends: systemd | cron | cron-daemon
Suggests: isag
Conffiles:
/etc/cron.d/sysstat 455c3c071b6daabb4e4490828975034c
/etc/cron.daily/sysstat 200a6578eb7a7da30665b913e2559f61
/etc/init.d/sysstat d25b89308163baa0f9844757e098dd33
/etc/sysstat/sysstat 6c424252786467d54de68358bfcc1e29
/etc/sysstat/sysstat.ioconf a4fca530dc30ba916dd8fd8b0e0fdf9d
Description: system performance tools for Linux
The sysstat package contains the following system performance tools:
- sar: collects and reports system activity information;
- iostat: reports CPU utilization and disk I/O statistics;
- tapestat: reports statistics for tapes connected to the system;
- mpstat: reports global and per-processor statistics;
- pidstat: reports statistics for Linux tasks (processes);
- sadf: displays data collected by sar in various formats;
- cifsiostat: reports I/O statistics for CIFS filesystems.
.
The statistics reported by sar deal with I/O transfer rates,
paging activity, process-related activities, interrupts,
network activity, memory and swap space utilization, CPU
utilization, kernel activities and TTY statistics, among
others. Both UP and SMP machines are fully supported.
Homepage: http://pagesperso-orange.fr/sebastien.godard/
Original-Maintainer: Robert Luberda <robert@debian.org>
Package: systemd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 16296
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 249.11-0ubuntu3.11
Provides: systemd-sysusers (= 249.11-0ubuntu3.11), systemd-tmpfiles (= 249.11-0ubuntu3.11)
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libcrypt1 (>= 1:4.4.0), libcryptsetup12 (>= 2:2.4), libgnutls30 (>= 3.7.2), libgpg-error0 (>= 1.14), libip4tc2 (>= 1.8.3), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r130), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libssl3 (>= 3.0.0~~alpha1), libsystemd0 (= 249.11-0ubuntu3.11), util-linux (>= 2.27.1), mount (>= 2.26), adduser
Pre-Depends: libblkid1 (>= 2.24), libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 3.1~), libzstd1 (>= 1.4.0)
Recommends: default-dbus-system-bus | dbus-system-bus, networkd-dispatcher, systemd-timesyncd | time-daemon
Suggests: systemd-container, libfido2-1, libtss2-esys-3.0.2-0, libtss2-mu0, libtss2-rc0, policykit-1
Breaks: resolvconf (<< 1.83~), udev (<< 247~)
Conflicts: consolekit, libpam-ck-connector, systemd-shim
Conffiles:
/etc/systemd/journald.conf d2187d732ab2911016a4d4017c155dbb
/etc/systemd/logind.conf 01fce0d0c11426fd7561a6b3bc907ed6
/etc/systemd/networkd.conf f461eed370e565cbe9890dd6b2c43996
/etc/systemd/pstore.conf ea1d43113c41edaacb39180d60a50b08
/etc/systemd/resolved.conf f87758687f627a75dfac54727cf08462
/etc/systemd/sleep.conf b15f42ea3ac089d0c96067de38268ff6
/etc/systemd/system.conf edb0a583ef891cdbe4c5611f24907e9c
/etc/systemd/user.conf e9c22208d3f0f96ef04eb5fbfecf5d2e
Description: system and service manager
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
Installing the systemd package will not switch your init system unless you
boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: systemd-hwe-hwdb
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: systemd-hwe
Version: 249.11.3
Depends: udev
Description: udev rules for hardware enablement (HWE)
systemd-hwe-hwdb contains hwdb rules for HWE on Ubuntu,
which are not yet present in systemd.
Package: systemd-sysv
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.11
Replaces: sysvinit-core
Depends: systemd (= 249.11-0ubuntu3.11)
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: file-rc, systemd-shim, sysvinit-core
Description: system and service manager - SysV links
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
This package provides the manual pages and links needed for systemd
to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: systemd-timesyncd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 268
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.11
Replaces: systemd (<< 245.4-2~), time-daemon
Provides: time-daemon
Depends: libc6 (>= 2.34), systemd (= 249.11-0ubuntu3.11), adduser
Breaks: systemd (<< 245.4-2~)
Conflicts: time-daemon
Conffiles:
/etc/dhcp/dhclient-exit-hooks.d/timesyncd c66e563f4050725592e2da20a4e1bfef
/etc/systemd/timesyncd.conf 01ca3edea53f3dcc591db0c2f330b538
Description: minimalistic service to synchronize local time with NTP servers
The package contains the systemd-timesyncd system service that may be used to
synchronize the local system clock with a remote Network Time Protocol server.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: sysv-rc
Status: deinstall ok config-files
Priority: required
Section: admin
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.3ubuntu2
Config-Version: 2.88dsf-59.3ubuntu2
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Pre-Depends: init-system-helpers (>= 1.25~)
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63), systemd (<< 215)
Description: System-V-like runlevel change mechanism
This package provides support for the System-V like system
for booting, changing runlevels, and shutting down,
configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.01-1ubuntu1
Depends: lsb-base (>= 11.0.0~), libc6 (>= 2.34)
Description: System-V-like utilities
This package contains the important System-V-like utilities.
.
Specifically, this package includes:
init-d-script, fstab-decode, killall5, pidof
Homepage: https://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 960
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.34+dfsg-1ubuntu0.1.22.04.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
Tar is a program for packaging a set of files as a single archive in tar
format. The function it performs is conceptually similar to cpio, and to
things like PKZIP in the DOS world. It is heavily used by the Debian package
management system, and is useful for performing system backups and exchanging
sets of files with others.
Homepage: https://www.gnu.org/software/tar/
Original-Maintainer: Janos Lenart <ocsi@debian.org>
Package: tasksel
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.68ubuntu2
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Conflicts: base-config (<< 2.32), debconf (<< 1.4.27)
Description: tool for selecting tasks for installation on Debian systems
This package provides 'tasksel', a simple interface for users who
want to configure their system to perform a specific task.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: tasksel-data
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: tasksel
Version: 3.68ubuntu2
Depends: tasksel (= 3.68ubuntu2)
Recommends: laptop-detect
Conflicts: tasksel (<< 2.67)
Description: official tasks used for installation of Debian systems
This package contains data about the standard tasks available on a Debian
system.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: tcl
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 22
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: tcltk-defaults
Version: 8.6.11+1build2
Provides: tclsh
Depends: tcl8.6 (>= 8.6.11+dfsg-1~)
Breaks: tcl8.3 (<< 8.3.5-15), tcl8.4 (<< 8.4.20-2), tcl8.5 (<< 8.5.14-3), tcl8.6 (<< 8.6.0-2)
Description: Tool Command Language (default version) - shell
Tcl is a powerful, easy to use, embeddable, cross-platform interpreted
scripting language.
.
This package is a dependency package, which depends on Debian's default
Tcl version (currently 8.6).
Original-Maintainer: Debian Tcl/Tk Packagers <pkg-tcltk-devel@lists.alioth.debian.org>
Package: tcl8.6
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.6.12+dfsg-1build1
Depends: libc6 (>= 2.34), libtcl8.6 (>= 8.6.0)
Suggests: tcl-tclreadline
Conflicts: tcl74 (<= 7.4p3-2)
Description: Tcl (the Tool Command Language) v8.6 - shell
Tcl is a powerful, easy to use, embeddable, cross-platform interpreted
scripting language. This package contains the Tcl shell which you need
to run Tcl scripts. This version includes thread support.
Homepage: http://www.tcl.tk/
Original-Maintainer: Debian Tcl/Tk Packagers <pkg-tcltk-devel@lists.alioth.debian.org>
Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-31build2
Depends: libc6 (>= 2.34), libwrap0 (= 7.6.q-31build2)
Description: Wietse Venema's TCP wrapper utilities
Wietse Venema's network logger, also known as TCPD or LOG_TCP.
.
These programs log the client host name of incoming telnet,
ftp, rsh, rlogin, finger etc. requests.
.
Security options are:
- access control per host, domain and/or service;
- detection of host name spoofing or host address spoofing;
- booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.99.1-3ubuntu0.1
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: adduser, libc6 (>= 2.34), libpcap0.8 (>= 1.9.0), libssl3 (>= 3.0.0~~alpha1)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
/etc/apparmor.d/usr.bin.tcpdump b9a4448b2ee472b84715262e4ae41165
Description: command-line network traffic analyzer
This program allows you to dump the traffic on a network. tcpdump
is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
types.
.
It can be used to print out the headers of packets on a network
interface, filter packets that match a certain expression. You can
use this tool to track down network problems, to detect attacks
or to monitor network activities.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netkit-telnet
Version: 0.17-44build1
Replaces: netstd
Provides: telnet-client
Depends: libc6 (>= 2.34), libstdc++6 (>= 5), netbase
Description: basic telnet client
The telnet command is used for interactive communication with another host
using the TELNET protocol.
.
For the purpose of remote login, the present client executable should be
depreciated in favour of an ssh-client, or in some cases with variants like
telnet-ssl or Kerberized TELNET clients. The most important reason is that
this implementation exchanges user name and password in clear text.
.
On the other hand, the present program does satisfy common use cases of
network diagnostics, like protocol testing of SMTP services, so it can
become handy enough.
Homepage: http://www.hcs.harvard.edu/~dholland/computers/netkit.html
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: thin-provisioning-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1421
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.0-2ubuntu1
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.34), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: Tools for handling thinly provisioned device-mapper meta-data
This package contains tools to handle meta-data from the device-mapper
thin target. This target allows the use of a single backing store for multiple
thinly provisioned volumes. Numerous snapshots can be taken from such
volumes. The tools can check the meta-data for consistency, repair damaged
information and dump or restore the meta-data in textual form.
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Package: tilix
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 3415
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.9.4-2build1
Replaces: terminix (<< 1.5.4-1~)
Provides: x-terminal-emulator
Depends: tilix-common (= 1.9.4-2build1), dconf-gsettings-backend | gsettings-backend, libc6 (>= 2.34), libgtkd-3-0 (>= 3.10.0), libphobos2-ldc-shared98 (>= 1:1.28.0), libunwind8, libvted-3-0 (>= 3.10.0), libx11-6
Suggests: python-nautilus
Breaks: terminix (<< 1.5.4-1~)
Description: Tiling terminal emulator for GNOME
Tilix is a feature-rich tiling terminal emulator following the
GNOME human interface design guidelines.
Its many features include:
.
* Layout terminals in any fashion by splitting them horizontally or
vertically.
* Terminals can be re-arranged using drag and drop both within and
between windows.
* Terminals can be detached into a new window via drag and drop.
* Input can be synchronized between terminals so commands typed in
one terminal are replicated to the others.
* Supports notifications when processes are completed out of view.
Homepage: https://gnunn1.github.io/tilix-web/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: tilix-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: tilix
Version: 1.9.4-2build1
Replaces: terminix-common (<< 1.5.4-1~)
Breaks: terminix-common (<< 1.5.4-1~)
Description: Tiling terminal emulator - data files
Tilix is a feature-rich tiling terminal emulator following the
GNOME human interface design guidelines.
.
This package contains architecture independent data.
Homepage: https://gnunn1.github.io/tilix-web/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9-0.1build2
Depends: libc6 (>= 2.34)
Description: GNU time program for measuring CPU resource usage
The 'time' command runs another program, then displays information
about the resources used by that program, collected by the system while
the program was running. You can select which information is reported
and the format in which it is shown, or have 'time' save the information
in a file instead of display it on the screen.
.
The resources that 'time' can report on fall into the general
categories of time, memory, I/O, and IPC calls.
.
The GNU version can format the output in arbitrary ways by using a
printf-style format string to include various resource measurements.
Homepage: https://www.gnu.org/software/time
Original-Maintainer: Bob Proulx <bob@proulx.com>
Package: tmux
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1026
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.2a-4ubuntu0.2
Depends: libc6 (>= 2.34), libevent-core-2.1-7 (>= 2.1.8-stable), libtinfo6 (>= 6), libutempter0 (>= 1.1.5)
Description: terminal multiplexer
tmux enables a number of terminals (or windows) to be accessed and
controlled from a single terminal like screen. tmux runs as a
server-client system. A server is created automatically when necessary
and holds a number of sessions, each of which may have a number of
windows linked to it. Any number of clients may connect to a session,
or the server may be controlled by issuing commands with tmux.
Communication takes place through a socket, by default placed in /tmp.
Moreover tmux provides a consistent and well-documented command
interface, with the same syntax whether used interactively, as a key
binding, or from the shell. It offers a choice of vim or Emacs key
layouts.
Homepage: https://tmux.github.io/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: tnftp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 231
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 20210827-4build1
Replaces: lukemftp
Provides: ftp
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libssl3 (>= 3.0.0~~alpha1)
Conflicts: lukemftp
Description: enhanced ftp client
tnftp is what many users affectionately call the enhanced ftp
client in NetBSD (http://www.netbsd.org).
.
This package is a `port' of the NetBSD ftp client to other systems.
.
The enhancements over the standard ftp client in 4.4BSD include:
* command-line editing within ftp
* command-line fetching of URLS, including support for:
- http proxies (c.f: $http_proxy, $ftp_proxy)
- authentication
* context sensitive command and filename completion
* dynamic progress bar
* IPv6 support (from the WIDE project)
* modification time preservation
* paging of local and remote files, and of directory listings
(c.f: `lpage', `page', `pdir')
* passive mode support, with fallback to active mode
* `set option' override of ftp environment variables
* TIS Firewall Toolkit gate ftp proxy support (c.f: `gate')
* transfer-rate throttling (c.f: `-T', `rate')
Homepage: http://en.wikipedia.org/wiki/Tnftp
Original-Maintainer: xiao sheng wen <atzlinux@sina.com>
Package: tpm-udev
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.6
Depends: adduser, udev
Description: udev rules for TPM modules
This package provides udev rules for the TPM modules. Both TPM1 or TPM2 need
this package to be installed to provide proper permissions of the TPM.
Original-Maintainer: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Package: tzdata
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3881
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2023c-0ubuntu0.22.04.2
Provides: tzdata-bookworm
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
This package contains data required for the implementation of
standard local time for many representative locations around the
globe. It is updated periodically to reflect changes made by
political bodies to time zone boundaries, UTC offsets, and
daylight-saving rules.
Homepage: https://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: ubuntu-advantage-tools
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 1125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 30~22.04
Depends: debconf (>= 0.5) | debconf-2.0, python3-yaml, python3:any, libapt-pkg6.0 (>= 1.9~), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libjson-c5 (>= 0.15), libstdc++6 (>= 11), python3-apt, python3-pkg-resources, distro-info (>= 0.18ubuntu0.18.04.1)
Recommends: ubuntu-pro-client-l10n
Conffiles:
/etc/apt/apt.conf.d/20apt-esm-hook.conf 43c92b89ef81645065c6277ba90529c5
/etc/apt/preferences.d/ubuntu-pro-esm-apps 30b368fbe91a2fcbefd509a5ca0dead4
/etc/apt/preferences.d/ubuntu-pro-esm-infra 39f77c64b5c996572ccb8313f4ad8471
/etc/logrotate.d/ubuntu-advantage-tools 852ec664fd0f1ecb26e726f5e801e9fd
/etc/ubuntu-advantage/uaclient.conf f84a9c135c3d556856f9ab6d2751e365
/etc/update-manager/release-upgrades.d/ubuntu-advantage-upgrades.cfg 82b5d8872cdcde8d3a0f68112de703fa
/etc/update-motd.d/91-contract-ua-esm-status 6346b049bc070e0519c621de0f636bb5
Description: management tools for Ubuntu Pro
Ubuntu Pro is the professional package of tooling, technology
and expertise from Canonical, helping organisations around the world
manage their Ubuntu deployments.
.
Subscribers to Ubuntu Pro will find helpful tools for accessing
services in this package.
Homepage: https://ubuntu.com/advantage
Package: ubuntu-cloudimage-keyring
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 11
Maintainer: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-keyring
Version: 2021.03.26
Depends: ubuntu-keyring (>= 2018.02.06)
Description: dummy transitional package for GnuPG keys of cloudimage keyring
This package can be safely removed, as cloudimage keyring is now
shipped in the ubuntu-keyring package
Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 41
Maintainer: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2021.03.26
Replaces: ubuntu-cloudimage-keyring (<< 2018.02.05)
Breaks: ubuntu-cloudimage-keyring (<< 2018.02.05)
Description: GnuPG keys of the Ubuntu archive
The Ubuntu project digitally signs its Release files. This package
contains the archive keys used for that.
Package: ubuntu-minimal
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.481.1
Depends: adduser, apt, apt-utils, console-setup, debconf, debconf-i18n, e2fsprogs, eject, init, iproute2, iputils-ping, isc-dhcp-client, kbd, kmod, less, locales, lsb-release, mawk, mount, netbase, netcat-openbsd, netplan.io, passwd, procps, python3, sensible-utils, sudo, tzdata, ubuntu-advantage-tools, ubuntu-keyring, udev, vim-tiny, whiptail
Recommends: rsyslog, usrmerge
Description: Minimal core of Ubuntu
This package depends on all of the packages in the Ubuntu minimal system,
that is a functional command-line system with the following capabilities:
.
- Boot
- Detect hardware
- Connect to a network
- Install packages
- Perform basic diagnostics
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: ubuntu-mono
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5587
Maintainer: Ubuntu Artwork Team <ubuntu-art@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-themes
Version: 20.10-0ubuntu2
Depends: adwaita-icon-theme, hicolor-icon-theme, humanity-icon-theme
Description: Ubuntu Mono Icon theme
Dark and Light panel icons to make your desktop beautiful.
Homepage: https://launchpad.net/ubuntu-themes
Package: ubuntu-pro-client-l10n
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-advantage-tools
Version: 30~22.04
Depends: ubuntu-advantage-tools (>= 30~)
Description: Translations for Ubuntu Pro Client
This package delivers translations of Ubuntu Pro Client for various
languages.
Homepage: https://ubuntu.com/advantage
Package: ubuntu-release-upgrader-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:22.04.17
Replaces: update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Depends: python3:any, python3-distupgrade (= 1:22.04.17), ca-certificates
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: software-properties (<< 0.9.27), update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Conffiles:
/etc/update-manager/meta-release 25ba16c3215bff43f0272d3d93103f15
/etc/update-manager/release-upgrades 54fd85e86c6bc2db8d7cc3c18013e3aa
/etc/update-motd.d/91-release-upgrade 6147b099ff496ef5949d94451791bc4b
Description: manage release upgrades
This is the core of the Ubuntu Release Upgrader
Package: ubuntu-server
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.481.1
Depends: apport, bcache-tools, btrfs-progs, byobu, cloud-guest-utils, cloud-initramfs-copymods, cloud-initramfs-dyn-netconf, curl, dirmngr, ethtool, fonts-ubuntu-console, git, gnupg, htop, lvm2, mdadm, motd-news-config, multipath-tools, overlayroot, patch, pollinate, screen, software-properties-common, sosreport, tmux, update-notifier-common, vim, xfsprogs
Recommends: fwupd, landscape-common, lxd-agent-loader, needrestart, open-iscsi, open-vm-tools, snapd, unattended-upgrades
Description: The Ubuntu Server system
This package depends on all of the packages in the Ubuntu Server system
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: ubuntu-standard
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.481.1
Depends: bind9-dnsutils, busybox-static, cpio, cron, dmidecode, dosfstools, ed, file, ftp, hdparm, info, libpam-systemd, logrotate, lshw, lsof, man-db, media-types, nftables, parted, pciutils, psmisc, rsync, strace, time, usbutils, wget, xz-utils
Recommends: apparmor, bash-completion, command-not-found, friendly-recovery, iptables, iputils-tracepath, irqbalance, manpages, mtr-tiny, nano, ntfs-3g, openssh-client, plymouth, plymouth-theme-ubuntu-text, tcpdump, telnet, ufw, update-manager-core, uuid-runtime
Description: The Ubuntu standard system
This package depends on all of the packages in the Ubuntu standard system.
This set of packages provides a comfortable command-line Unix-like
environment.
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: ucf
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.0043
Depends: debconf (>= 1.5.19), coreutils (>= 5.91), sensible-utils
Conffiles:
/etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
Debian policy mandates that user changes to configuration files must be
preserved during package upgrades. The easy way to achieve this behavior
is to make the configuration file a 'conffile', in which case dpkg
handles the file specially during upgrades, prompting the user as
needed.
.
This is appropriate only if it is possible to distribute a default
version that will work for most installations, although some system
administrators may choose to modify it. This implies that the
default version will be part of the package distribution, and must
not be modified by the maintainer scripts during installation (or at
any other time).
.
This script attempts to provide conffile-like handling for files that
may not be labelled conffiles, and are not shipped in a Debian package,
but handled by the postinst instead. This script allows one to
maintain files in /etc, preserving user changes and in general
offering the same facilities while upgrading that dpkg normally
provides for 'conffiles'.
.
Additionally, this script provides facilities for transitioning a
file that had not been provided with conffile-like protection to come
under this schema, and attempts to minimize questions asked at
installation time. Indeed, the transitioning facility is better than the
one offered by dpkg while transitioning a file from a non-conffile to
conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>
Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.11
Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libkmod2 (>= 5~), libselinux1 (>= 3.1~), adduser, libudev1 (= 249.11-0ubuntu3.11), util-linux (>= 2.27.1)
Recommends: systemd-hwe-hwdb
Breaks: systemd (<< 249.11-0ubuntu3.11)
Conflicts: hal
Conffiles:
/etc/init.d/udev e9424814d107af7d8f58a22b1011810a
/etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: udisks2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1176
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.9.4-1ubuntu2
Depends: dbus, libblockdev-fs2, libblockdev-loop2, libblockdev-part2, libblockdev-swap2, parted, udev, libacl1 (>= 2.2.23), libatasmart4 (>= 0.13), libblockdev-utils2 (>= 2.24), libblockdev2 (>= 2.25), libc6 (>= 2.34), libglib2.0-0 (>= 2.50), libgudev-1.0-0 (>= 165), libmount1 (>= 2.30), libpolkit-agent-1-0 (>= 0.102), libpolkit-gobject-1-0 (>= 0.102), libsystemd0 (>= 209), libudisks2-0 (>= 2.9.0), libuuid1 (>= 2.16)
Recommends: dosfstools, e2fsprogs, eject, libblockdev-crypto2, ntfs-3g, policykit-1, libpam-systemd
Suggests: btrfs-progs, f2fs-tools, libblockdev-mdraid2, mdadm, nilfs-tools, reiserfsprogs, udftools, udisks2-bcache, udisks2-btrfs, udisks2-lvm2, udisks2-zram, xfsprogs, exfatprogs
Conffiles:
/etc/udisks2/mount_options.conf.example 590c5abc453c373b1db7e4ded4af43d1
/etc/udisks2/udisks2.conf cdca35d6490b9ff83f095070039ec117
Description: D-Bus service to access and manipulate storage devices
The udisks daemon serves as an interface to system block devices,
implemented via D-Bus. It handles operations such as querying, mounting,
unmounting, formatting, or detaching storage devices such as hard disks
or USB thumb drives.
.
This package also provides the udisksctl utility, which can be used to
trigger these operations from the command line (if permitted by
PolicyKit).
.
Creating or modifying file systems such as XFS, RAID, or LUKS encryption
requires that the corresponding mkfs.* and admin tools are installed, such as
dosfstools for VFAT, xfsprogs for XFS, or cryptsetup for LUKS.
Homepage: https://www.freedesktop.org/wiki/Software/udisks
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: ufw
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 830
Maintainer: Jamie Strandboge <jdstrand@ubuntu.com>
Architecture: all
Version: 0.36.1-4ubuntu0.1
Depends: iptables, lsb-base (>= 3.0-6), ucf, python3:any, debconf (>= 0.5) | debconf-2.0
Suggests: rsyslog
Conffiles:
/etc/default/ufw a921dd9d167380b04de4bc911915ea44
/etc/init.d/ufw 4156943ab8a824fcf4b04cc1362eb230
/etc/logrotate.d/ufw 969308e0ddfb74505f0da47b49ada218
/etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1
/etc/ufw/sysctl.conf 7723079fc108eda8f57eddab3079c70a
Description: program for managing a Netfilter firewall
The Uncomplicated FireWall is a front-end for iptables, to make managing a
Netfilter firewall easier. It provides a command line interface with syntax
similar to OpenBSD's Packet Filter. It is particularly well-suited as a
host-based firewall.
Homepage: https://launchpad.net/ufw
Package: uidmap
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.8.1-2ubuntu2.1
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: programs to help use subuids
These programs help unprivileged users to create uid and gid mappings in
user namespaces.
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.8ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0, debconf, python3, python3-apt (>= 1.9.6~), python3-dbus, python3-distro-info, ucf, lsb-release, lsb-base, xz-utils
Recommends: systemd-sysv | cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart, powermgmt-base, python3-gi
Conffiles:
/etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
/etc/kernel/postinst.d/unattended-upgrades f296826482cb797aeef13554e093dbca
/etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
/etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
/etc/update-motd.d/92-unattended-upgrades afa7546d3fe561e1f5783f7b9cf72096
Description: automatic installation of security upgrades
This package can download and install security upgrades automatically
and unattended, taking care to only install packages from the
configured APT source, and checking for dpkg prompts about
configuration file changes.
.
This script is the backend for the APT::Periodic::Unattended-Upgrade
option.
Original-Maintainer: Michael Vogt <mvo@debian.org>
Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 376
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-26ubuntu3.1
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
InfoZIP's unzip program. With the exception of multi-volume archives
(ie, .ZIP files that are split across several disks using PKZIP's /& option),
this can handle any file produced either by PKZIP, or the corresponding
InfoZIP zip program.
.
This version supports encryption.
Homepage: http://www.info-zip.org/UnZip.html
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: update-manager-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:22.04.10
Replaces: update-manager (<< 1:0.146.2)
Depends: python3:any (>= 3.2~), python3-update-manager (= 1:22.04.10), python3-distro-info, distro-info-data, lsb-release, ubuntu-release-upgrader-core (>= 1:18.04.9), ubuntu-advantage-tools
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: computer-janitor (<= 1.11-0ubuntu1), update-manager (<< 1:0.146.2)
Description: manage release upgrades
This is the core of update-manager and the release upgrader
Package: update-notifier-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1468
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: update-notifier
Version: 3.192.54.6
Replaces: update-notifier (<< 0.75.1)
Depends: python3:any, python3-apt, python3-dbus, python3-debian, python3-debconf | debconf (<< 1.5.64~), python3-distro-info, lsb-release, patch, update-manager-core (>= 1:17.04.2)
Pre-Depends: dpkg (>= 1.15.7.2), apt (>= 1.1~)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Suggests: policykit-1
Conffiles:
/etc/apt/apt.conf.d/10periodic 03ddb526e156071de0667748b6ac1d33
/etc/apt/apt.conf.d/15update-stamp b9de0ac9e2c9854b1bb213e362dc4e41
/etc/apt/apt.conf.d/20archive 9e28a07261e6ad5ede22d5286291ca23
/etc/apt/apt.conf.d/99update-notifier 8c8636b1123964162e9a1127f237ba7b
/etc/update-motd.d/90-updates-available eaddabe4cbd443e9da6b14452b0a8fe5
/etc/update-motd.d/95-hwe-eol 0205f1a3306acc0b76f0b0a0fb6462c3
/etc/update-motd.d/98-fsck-at-reboot 16003ee8c8c80a565a98a7696cee04c0
/etc/update-motd.d/98-reboot-required 1c4d534d0abd44d566899e47c4f22786
Description: Files shared between update-notifier and other packages
Apt setup files and reboot notification scripts shared between
update-notifier and other packages, notably for server use cases.
Package: ureadahead
Status: deinstall ok config-files
Priority: important
Section: admin
Installed-Size: 73
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: amd64
Version: 0.100.0-21
Config-Version: 0.100.0-21
Replaces: readahead
Provides: readahead
Depends: libblkid1 (>= 2.16), libc6 (>= 2.4), libext2fs2 (>= 1.37), libnih1 (>= 1.0.0)
Conflicts: readahead, systemd (<< 217)
Description: Read required files in advance
über-readahead is used during boot to read files in advance of when
they are needed such that they are already in the page cache,
improving boot performance.
.
Its data files are regenerated on the first boot after install, and
either monthly thereafter or when packages with init scripts or
configs are installed or updated.
.
ureadahead requires a kernel patch included in the Ubuntu kernel.
Package: usb-modeswitch
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.6.1-3ubuntu2
Depends: tcl, usb-modeswitch-data, libc6 (>= 2.34), libusb-1.0-0 (>= 2:1.0.9)
Suggests: comgt, wvdial
Conffiles:
/etc/usb_modeswitch.conf b7f857804762b4a81a71c93a2fe1207f
Description: mode switching tool for controlling "flip flop" USB devices
Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the binaries and the brother scripts.
Homepage: https://www.draisberghof.de/usb_modeswitch/
Original-Maintainer: Thorsten Alteholz <debian@alteholz.de>
Package: usb-modeswitch-data
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 20191128-4
Replaces: usb-modeswitch-data-packed
Provides: usb-modeswitch-data-packed
Recommends: udev, usb-modeswitch (>= 2.4.0)
Breaks: usb-modeswitch (<< 2.4.0)
Conflicts: usb-modeswitch-data-packed
Description: mode switching data for usb-modeswitch
Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the commands data needed for usb-modeswitch.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: https://www.draisberghof.de/usb_modeswitch/
Package: usb.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 715
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2022.04.02-1
Replaces: usbutils (<< 1:008-1)
Breaks: usbutils (<< 1:008-1)
Description: USB ID Repository
This package contains the usb.ids file, a public repository of all known
ID's used in USB devices: ID's of vendors, devices, subsystems and device
classes. It is used in various programs to display full human-readable
names instead of cryptic numeric codes.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/usb-ids.html
Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:014-1build1
Depends: libc6 (>= 2.34), libudev1 (>= 196), libusb-1.0-0 (>= 2:1.0.22)
Breaks: hwdata (<< 0.334-1~), isenkram (<< 0.45~), kinfocenter (<< 4:5.14.5-2~), libosinfo-1.0-0 (<< 1.8.0-1~), usbip (<< 2.0+5.10.4-1~)
Description: Linux USB utilities
This package contains the lsusb utility for inspecting the devices
connected to the USB bus. It shows a graphical representation of the
devices that are currently plugged in, showing the topology of the
USB bus. It also displays information on each individual device on
the bus.
Homepage: https://github.com/gregkh/usbutils
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Package: usrmerge
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 25ubuntu2
Depends: perl-base (>= 5.32.1-3)
Breaks: cruft-ng (<< 0.4.4~), initramfs-tools (<< 0.121~)
Conflicts: acl (<< 2.2.52-3~), arptables (<< 0.0.4+snapshot20181021-1~), coreutils (<< 8.24-1~), cryptsetup (<< 2:1.7.0-1~), davfs2 (<< 1.5.2-1.2~), debianutils (<< 4.5~), ebtables (<< 2.0.10.4+snapshot20181205-1~), elvis-tiny (<< 1.4-24~), kbd (<< 2.0.3-1~), ksh (<< 93u+20120801-3.1~), less (<< 481-2~), libbrlapi-dev (<< 5.3.1-1~), libdm0-dev, libjson-c-dev (<< 0.12.1-1.1~), libpng12-0 (<< 1.2.54-4~), libusb-0.1-4 (<< 2:0.1.12-28~), mksh (<< 52b-1~), molly-guard (<< 0.7.1+exp1~), musl-dev (<< 1.1.9-1.1~), nano (<< 2.3.99pre3-1~), open-iscsi (<< 2.0.873+git0.3b4b4500-13~), open-vm-tools (<< 2:10.0.5-3227872-2~), policycoreutils (<< 2.4-4~), safe-rm (<< 0.12-6~), tcsh (<< 6.18.01-4~), vsearch (<< 1.9.5-2~), xfsdump (<< 3.1.6+nmu1~), xfslibs-dev (<< 4.9.0+nmu1~), yp-tools (<< 3.3-5~), zsh (<< 5.2-4~)
Description: Convert the system to the merged /usr directories scheme
This package will automatically convert the system to the merged
/usr directory scheme, in which the /{bin,sbin,lib}/ directories are
symlinked to their counterparts in /usr/.
.
There is no automatic method to restore the precedent configuration, so
there is no going back once this package has been installed.
Homepage: https://wiki.debian.org/UsrMerge
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.37.2-4ubuntu3
Replaces: hardlink
Provides: hardlink
Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), libmount1 (>= 2.37.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.34), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd, util-linux-locales
Conflicts: hardlink
Conffiles:
/etc/init.d/hwclock.sh c06bc68c12cbdd9c7f60ba25ee587efe
/etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
/etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
/etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
/etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
This package contains a number of important utilities, most of which
are oriented towards maintenance of your system. Some of the more
important utilities included in this package allow you to view kernel
messages, create new filesystems, view block device information,
interface with real time clock, etc.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3
Depends: adduser, libc6 (>= 2.34), libsmartcols1 (>= 2.27~rc1), libsystemd0, libuuid1 (>= 2.31.1)
Pre-Depends: libuuid1, init-system-helpers (>= 1.54~)
Conffiles:
/etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
The libuuid library generates and parses 128-bit Universally Unique
IDs (UUIDs). A UUID is an identifier that is unique within the space
of all such identifiers across both space and time. It can be used for
multiple purposes, from tagging objects with an extremely short lifetime
to reliably identifying very persistent objects across a network.
.
See RFC 4122 for more information.
.
This package contains the uuidgen program and the uuidd daemon.
.
The uuidd daemon is used to generate UUIDs, especially time-based
UUIDs, in a secure and guaranteed-unique fashion, even in the face of
large numbers of threads trying to grab UUIDs running on different CPUs.
It is used by libuuid as well as the uuidgen program.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>
Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 3930
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:8.2.3995-1ubuntu2.13
Provides: editor
Depends: vim-common (= 2:8.2.3995-1ubuntu2.13), vim-runtime (= 2:8.2.3995-1ubuntu2.13), libacl1 (>= 2.2.23), libc6 (>= 2.34), libgpm2 (>= 1.20.7), libpython3.10 (>= 3.10.0), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
Vim is an almost compatible version of the UNIX editor Vi.
.
Many new features have been added: multi level undo, syntax
highlighting, command line history, on-line help, filename
completion, block operations, folding, Unicode support, etc.
.
This package contains a version of vim compiled with a rather
standard set of features. This package does not provide a GUI
version of Vim. See the other vim-* packages if you need more
(or less).
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 381
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.13
Depends: xxd
Recommends: vim | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Conffiles:
/etc/vim/vimrc e782ef3054004f773d556475cfad5870
Description: Vi IMproved - Common files
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains files shared by all non GUI-enabled vim variants
available in Debian. Examples of such shared files are: manpages and
configuration files.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 32782
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.13
Recommends: vim | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:8.2.3995-1ubuntu2.13)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains vimtutor and the architecture independent runtime
files, used, if available, by all vim variants available in Debian.
Example of such runtime files are: online documentation, rules for
language-specific syntax highlighting and indentation, color schemes,
and standard plugins.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1723
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vim
Version: 2:8.2.3995-1ubuntu2.13
Provides: editor
Depends: vim-common (= 2:8.2.3995-1ubuntu2.13), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
/etc/vim/vimrc.tiny d587d5897899e491dae0f4a7b780642a
Description: Vi IMproved - enhanced vi editor - compact version
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains a minimal version of Vim compiled with no GUI and
a small subset of features. This package's sole purpose is to provide
the vi binary for base installations.
.
If a vim binary is wanted, try one of the following more featureful
packages: vim, vim-nox, vim-athena, or vim-gtk3.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Package: vlan
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.0.5ubuntu5
Depends: iproute2
Conffiles:
/etc/network/if-post-down.d/vlan 63cfb3b26b7ced6c6fcbcb0566a40c8a
/etc/network/if-pre-up.d/vlan ab5859cc4a5f0cd6a2a4e164235fd6a2
/etc/network/if-up.d/ip bf8f08cde1934f2ad51d633cc667c6df
/etc/network/if-up.d/vlan e8e8d8226f349113d40282b7d8515f7a
Description: ifupdown integration for vlan configuration
This package contains integration scripts for configuring vlan
interfaces via ifupdown (/etc/network/interfaces).
For further details see vlan-interfaces(5) man page in this package.
.
Please note that these integration scripts only supports a limited
set of interface naming schemes, which means you might be better
off with writing your own ifupdown hooks using ip(route2)
directly in /etc/network/interfaces rather than using this package.
.
It currently also ships a wrapper script for backwards compatibility
called vconfig, that replaces the old deprecated vconfig program
with translations to ip(route2) commands.
This compatibility shim might be dropped in future releases, please
use ip(route2) commands directly.
.
Your kernel needs vlan support for this to work, see "modinfo 8021q".
Original-Maintainer: Willem van den Akker <wvdakker@wilsoft.nl>
Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 984
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.2-2ubuntu1
Depends: libc6 (>= 2.34), libidn2-0 (>= 0.6), libpcre2-8-0 (>= 10.22), libpsl5 (>= 0.16.0), libssl3 (>= 3.0.0~~alpha1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
/etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
Wget is a network utility to retrieve files from the web
using HTTP(S) and FTP, the two most widely used internet
protocols. It works non-interactively, so it will work in
the background, after having logged off. The program supports
recursive retrieval of web-authoring pages as well as FTP
sites -- you can use Wget to make mirrors of archives and
home pages or to travel the web like a WWW robot.
.
Wget works particularly well with slow or unstable connections
by continuing to retrieve a document until the document is fully
downloaded. Re-getting files from where it left off works on
servers (both HTTP and FTP) that support it. Both HTTP and FTP
retrievals can be time stamped, so Wget can see if the remote
file has changed since the last retrieval and automatically
retrieve the new version if it has.
.
Wget supports proxy servers; this can lighten the network load,
speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>
Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.21-5ubuntu2
Depends: libc6 (>= 2.34), libnewt0.52 (>= 0.52.21), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
Whiptail is a "dialog" replacement using newt instead of ncurses. It
provides a method of displaying several different types of dialog boxes
from shell scripts. This allows a developer of a script to interact with
the user in a much friendlier manner.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: wireless-regdb
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2022.06.06-0ubuntu1~22.04.1
Description: wireless regulatory database
This package contains the wireless regulatory database used by the Central
Regulatory Database Agent (CRDA) to configure wireless devices to operate
within the radio spectrum allowed in the local jurisdiction.
.
This regulatory information is provided with no warranty either expressed or
implied. Only Linux drivers which use cfg80211 framework can make use of the
regulatory database and CRDA.
Homepage: https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
Original-Maintainer: Seth Forshee <seth@forshee.me>
Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 311
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+23ubuntu2
Depends: lsb-base (>= 1.3-9ubuntu2)
Conffiles:
/etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
/etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
/etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
/etc/X11/Xsession 1ec5f844cc2d850a8d98aed509e3198c
/etc/X11/Xsession.d/20x11-common_process-args 6957432229b7305a40cb84a7a63edd4e
/etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
/etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
/etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
/etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
/etc/X11/Xsession.d/60x11-common_xdg_path b4d4976a8dfa6ca2123f840fbfee76c7
/etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0
/etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
/etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
/etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
/etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43
Description: X Window System (X.Org) infrastructure
x11-common contains the filesystem infrastructure required for further
installation of the X Window System in any configuration; it does not
provide a full installation of clients, servers, libraries, and utilities
required to run the X Window System.
.
A number of terms are used to refer to the X Window System, including "X",
"X Version 11", "X11", "X11R6", and "X11R7". The version of X used in
Debian is derived from the version released by the X.Org Foundation, and
is thus often also referred to as "X.Org". All of the preceding quoted
terms are functionally interchangeable in an Debian system.
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: x11-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.7+5build2
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfontenc1 (>= 1:1.1.4), libgl1, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxaw7 (>= 2:1.0.14), libxcb-shape0, libxcb1 (>= 1.6), libxcomposite1 (>= 1:0.4.5), libxext6, libxft2 (>> 2.1.1), libxi6, libxinerama1 (>= 2:1.1.4), libxkbfile1 (>= 1:1.1.0), libxmu6 (>= 2:1.1.3), libxmuu1 (>= 2:1.1.3), libxrandr2 (>= 2:1.2.0), libxrender1, libxt6 (>= 1:1.1.0), libxtst6, libxv1, libxxf86dga1, libxxf86vm1
Suggests: mesa-utils
Conffiles:
/etc/X11/app-defaults/Editres 52c854cc7c64da8bebd2cc12ed598f55
/etc/X11/app-defaults/Editres-color 5ec5d0e8c953faaa06af647650f30ce6
/etc/X11/app-defaults/Viewres 4f77da598593ff07cda9d2d147a07772
/etc/X11/app-defaults/Viewres-color ff9c397a80443790a97b909050f63282
/etc/X11/app-defaults/XFontSel 183bca665ae87e3943bdb4362d21973d
/etc/X11/app-defaults/Xfd a8b4d28d2ad895e40cfb6fb9c69eeecd
/etc/X11/app-defaults/Xmessage eed84b35dde8b18e7dcfc80e75c1da67
/etc/X11/app-defaults/Xmessage-color ca383db9e4e9648bda0952ad6b8a2115
Description: X11 utilities
An X client is a program that interfaces with an X server (almost always via
the X libraries), and thus with some input and output hardware like a
graphics card, monitor, keyboard, and pointing device (such as a mouse).
.
This package provides a miscellaneous assortment of X utilities
that ship with the X Window System, including:
- appres, editres, listres and viewres, which query the X resource database;
- luit, a filter that can be run between an arbitrary application and a
UTF-8 terminal emulator;
- xdpyinfo, a display information utility for X;
- xdriinfo, query configuration information of DRI drivers;
- xev, an X event displayer;
- xfd, a tool that displays all the glyphs in a given X font;
- xfontsel, a tool for browsing and selecting X fonts;
- xkill, a tool for terminating misbehaving X clients;
- xlsatoms, which lists interned atoms defined on an X server;
- xlsclients, which lists client applications running on an X display;
- xlsfonts, a server font list displayer;
- xmessage, a tool to display message or dialog boxes;
- xprop, a property displayer for X;
- xvinfo, an Xv extension information utility for X;
- xwininfo, a window information utility for X;
.
The editres and viewres programs use bitmap images provided by the
xbitmaps package. The luit program requires locale information from
the libx11-data package.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: x11-xserver-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 7.7+9build1
Replaces: iceauth, sessreg, xbase-clients (<< 1:7.3), xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xutils (<< 1:7.2), xvidtune
Depends: libc6 (>= 2.34), libice6 (>= 1:1.0.0), libx11-6, libxaw7 (>= 2:1.0.14), libxcursor1 (>> 1.1.2), libxext6, libxi6, libxmu6 (>= 2:1.1.3), libxmuu1 (>= 2:1.1.3), libxrandr2 (>= 2:1.5.0), libxt6, libxxf86vm1, cpp
Suggests: nickle, cairo-5c, xorg-docs-core
Breaks: arandr (<< 0.1.9)
Conflicts: iceauth, sessreg, xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xvidtune
Conffiles:
/etc/X11/app-defaults/Xvidtune 0493a0782b498e9f0dee51a4013a80e6
Description: X server utilities
An X client is a program that interfaces with an X server (almost always via
the X libraries), and thus with some input and output hardware like a
graphics card, monitor, keyboard, and pointing device (such as a mouse).
.
This package provides a miscellaneous assortment of X Server utilities
that ship with the X Window System, including:
- iceauth, a tool for manipulating ICE protocol authorization records;
- rgb;
- sessreg, a simple program for managing utmp/wtmp entries;
- xcmsdb, a device color characteristic utility for the X Color Management
System;
- xgamma, a tool for querying and setting a monitor's gamma correction;
- xhost, a very dangerous program that you should never use;
- xmodmap, a utility for modifying keymaps and pointer button mappings in X;
- xrandr, a command-line interface to the RandR extension;
- xrdb, a tool to manage the X server resource database;
- xrefresh, a tool that forces a redraw of the X screen;
- xset, a tool for setting miscellaneous X server parameters;
- xsetmode and xsetpointer, tools for handling X Input devices;
- xsetroot, a tool for tailoring the appearance of the root window;
- xstdcmap, a utility to selectively define standard colormap properties;
- xvidtune, a tool for customizing X server modelines for your monitor.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: xauth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:1.1-1build2
Depends: libc6 (>= 2.34), libx11-6, libxau6 (>= 1:1.0.9), libxext6, libxmuu1 (>= 2:1.1.3)
Description: X authentication utility
xauth is a small utility to read and manipulate Xauthority files, which
are used by servers and clients alike to control authentication and access
to X sessions.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: xdg-user-dirs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 542
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.17-2ubuntu4
Depends: libc6 (>= 2.34)
Conffiles:
/etc/xdg/autostart/xdg-user-dirs.desktop 284e639a243bfb86fc415ce448e8fa35
/etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
/etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
Description: tool to manage well known user directories
xdg-user-dirs is a tool to help manage "well known" user directories
like the desktop folder and the music folder. It also handles
localization (i.e. translation) of the filenames.
.
The way it works is that xdg-user-dirs-update is run very early in the
login phase. This program reads a configuration file, and a set of
default directories. It then creates localized versions of these
directories in the users home directory and sets up a config file in
$(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
~/.config) that applications can read to find these directories.
Homepage: http://www.freedesktop.org/wiki/Software/xdg-user-dirs
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: xdg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 323
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.1.3-4.1ubuntu3~22.04.1
Recommends: libfile-mimeinfo-perl, libnet-dbus-perl, libx11-protocol-perl, x11-utils, x11-xserver-utils
Description: desktop integration utilities from freedesktop.org
xdg-utils contains utilities for integrating applications with the
desktop environment, regardless of which desktop environment is used.
.
The following utilities are included:
.
* xdg-desktop-menu - Install desktop menu items
* xdg-desktop-icon - Install icons on the user's desktop
* xdg-email - Compose a new email in the user's preferred email client,
potentially with subject and other info filled in
* xdg-icon-resource - Install icon resources
* xdg-mime - Query and install MIME types and associations
* xdg-open - Open a URI in the user's preferred application that
handles the respective URI or file type
* xdg-screensaver - Enable, disable, or suspend the screensaver
* xdg-settings - Get or set the default web browser and URI handlers
Homepage: https://www.freedesktop.org/wiki/Software/xdg-utils/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: xfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.13.0-1ubuntu2
Replaces: xfsdump (<< 3.0.0)
Provides: fsck-backend
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.20), libedit2 (>= 2.11-20080614-0), libicu70 (>= 70.1-1~), libinih1 (>= 53), libuuid1 (>= 2.16), python3:any
Suggests: xfsdump, acl, attr, quota
Breaks: xfsdump (<< 3.0.0)
Description: Utilities for managing the XFS filesystem
A set of commands to use the XFS filesystem, including mkfs.xfs.
.
XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
support large files and large filesystems, extended attributes,
variable block sizes, is extent based, and makes extensive use of
Btrees (directories, extents, free space) to aid both performance
and scalability.
.
Refer to the documentation at https://xfs.wiki.kernel.org/
for complete details.
Homepage: https://xfs.wiki.kernel.org/
Original-Maintainer: XFS Development Team <linux-xfs@vger.kernel.org>
Package: xkb-data
Status: install ok installed
Priority: important
Section: x11
Installed-Size: 4236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.33-1
Breaks: libx11-6 (<< 2:1.4.3), x11-xkb-utils (<< 7.7+5)
Description: X Keyboard Extension (XKB) configuration data
This package contains configuration data used by the X Keyboard
Extension (XKB), which allows selection of keyboard layouts when
using a graphical interface.
.
Every X11 vendor provides its own XKB data files, so keyboard layout
designers have to send their layouts to several places. The
xkeyboard-config project has been launched at FreeDesktop in order
to provide a central repository that could be used by all vendors.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig
Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.18+nmu1
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
/etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
This package creates the XML infrastructure directories and provides
XML catalog file support in compliance with the current Debian XML
Policy draft:
.
* infrastructure directories:
- /etc/xml
- /usr/share/xml/{declaration,entities,misc,schema}
- /usr/local/share/xml/{declaration,entities,misc,schema}
.
* XML catalog schema: OASIS XML Catalog Committee Specification 1.0
.
* update-xmlcatalog(8): tool for maintaining the root XML catalog
file and the package XML catalog files in the '/etc/xml' directory
as well as local XML catalog files.
.
* dh_installxmlcatalogs(1): debhelper tool for installing local XML
catalog files and registering XML entities in package XML catalog
files and the root XML catalog file (requires debhelper package)
Original-Maintainer: Debian XML-SGML group <debian-sgml@lists.debian.org>
Package: xxd
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 279
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.13
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.34)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
xxd creates a hex dump of a given file or standard input. It can also convert
a hex dump back to its original binary form.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Package: xz-utils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.5-2ubuntu1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.34), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
This package provides the command line tools for working with XZ
compression, including xz, unxz, xzcat, xzgrep, and so on. They can
also handle the older LZMA format, and if invoked via appropriate
symlinks will emulate the behavior of the commands in the lzma
package.
.
The XZ format is similar to the older LZMA format but includes some
improvements for general use:
.
* 'file' magic for detecting XZ files;
* crc64 data integrity check;
* limited random-access reading support;
* improved support for multithreading (not used in xz-utils);
* support for flushing the encoder.
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: zerofree
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.1.1-1build3
Depends: libc6 (>= 2.34), libext2fs2 (>= 1.42)
Description: zero free blocks from ext2, ext3 and ext4 file-systems
Zerofree finds the unallocated blocks with non-zero value content in
an ext2, ext3 or ext4 file-system and fills them with zeroes
(zerofree can also work with another value than zero). This is mostly
useful if the device on which this file-system resides is a disk
image. In this case, depending on the type of disk image, a secondary
utility may be able to reduce the size of the disk image after
zerofree has been run. Zerofree requires the file-system to be
unmounted or mounted read-only.
.
The usual way to achieve the same result (zeroing the unused
blocks) is to run "dd" to create a file full of zeroes that takes up
the entire free space on the drive, and then delete this file. This
has many disadvantages, which zerofree alleviates:
* it is slow;
* it makes the disk image (temporarily) grow to its maximal extent;
* it (temporarily) uses all free space on the disk, so other
concurrent write actions may fail.
.
Zerofree has been written to be run from GNU/Linux systems installed
as guest OSes inside a virtual machine. If this is not your case, you
almost certainly don't need this package. (One other use case would
be to erase sensitive data a little bit more securely than with a
simple "rm").
Homepage: https://frippery.org/uml/
Original-Maintainer: Thibaut Paumard <thibaut@debian.org>
Package: zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 531
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0-12build2
Depends: libbz2-1.0, libc6 (>= 2.34)
Recommends: unzip
Description: Archiver for .zip files
This is InfoZIP's zip program. It produces files that are fully
compatible with the popular PKZIP program; however, the command line
options are not identical. In other words, the end result is the same,
but the methods differ. :-)
.
This version supports encryption.
Homepage: http://www.info-zip.org/Zip.html
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-2ubuntu9.2
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>
Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-2ubuntu9.2
Provides: libz-dev
Depends: zlib1g (= 1:1.2.11.dfsg-2ubuntu9.2), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes the development support
files.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>
Package: zstd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1655
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libzstd
Version: 1.4.8+dfsg-3build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 12), zlib1g (>= 1:1.1.4)
Description: fast lossless compression algorithm -- CLI tool
Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
real-time compression scenarios at zlib-level compression ratio.
.
This package contains the CLI program implementing zstd.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>