��
$0P
5p
D
LP|�
}�j�V	9�4
Q
&n
�
�
�
�
�
$,Bo)����&)7)a�
��
vuH��u�����=�	���
�
���2� � � � � 
!!
!!,!"H!/k!�!*�!�!�!�!"'"E"%a"�$v�&�'�'�'�'�'�'�'>�'	;(E(
#	
" !$
K(ThQ( ����s(
����
  -4  force usage of the IPv4 protocols family
  -6  force usage of the IPv6 protocols family
  -b  specify the block bytes size (default: 1024)
  -d  wait for given delay (usec) between each block (default: 0)
  -e  perform a duplex test (TCP Echo instead of TCP Discard)
  -f  fill sent data blocks with the specified file content
  -h  display this help and exit
  -n  specify the number of blocks to send (default: 100)
  -V  display program version and exit
  -v  enable verbose output

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in TCP packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a "Type 0" routing header
  -h  display this help and exit
  -I  use ICMPv6 Echo Request packets as probes
  -i  force outgoing network interface
  -l  display incoming packets hop limit
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don't perform reverse name lookup on addresses
  -p  override destination port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -U  send UDP probes (default)
  -V  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in probe packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a "Type 0" routing header
  -h  display this help and exit
  -i  force outgoing network interface
  -l  set probes byte size
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don't perform reverse name lookup on addresses
  -p  override source TCP port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes (default)
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -V, --version  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)
  DNS server lifetime     :   DNS servers lifetime    :   Pref. time              :   Route lifetime          :   Route preference        :       %6s
  Valid time              :  (      0x%02x)
 MTU                      :  Prefix                   :  Recursive DNS server     : %s
%zu byte packets
%zu bytes packets
Child process hung up unexpectedly, abortingHop limit                 :    Neighbor discovery proxy  :          %3s
Reachable time            : Retransmit time           : Router lifetime           : Router preference         :       %6s
Stateful address conf.    :          %3s
Stateful other conf.      :          %3s
Usage: %s [-4|-6] [hostnames]
Converts names to addresses.

  -4, --ipv4     only lookup IPv4 addresses
  -6, --ipv6     only lookup IPv6 addresses
  -c, --config   only return addresses for locally configured protocols
  -h, --help     display this help and exit
  -m, --multiple print multiple results separated by spaces
  -n, --numeric  do not perform forward hostname lookup
  -r, --reverse  perform reverse address to hostname lookup
  -V, --version  display program version and exit
Usage: %s [OPTIONS]
Starts the IPv6 Recursive DNS Server discovery Daemon.

  -f, --foreground  run in the foreground
  -H, --merge-hook  execute this hook whenever resolv.conf is updated
  -h, --help        display this help and exit
  -p, --pidfile     override the location of the PID file
  -r, --resolv-file set the path to the generated resolv.conf file
  -u, --user        override the user to set UID to
  -V, --version     display program version and exit
Usage: %s [options] <IPv6 address> <interface>
Looks up an on-link IPv6 node link-layer address (Neighbor Discovery)
Usage: %s [options] <hostname/address> [service/port number]
Use the discard TCP service at the specified host
(the default host is the local system, the default service is discard)
advertized prefixeshighinvalidlowmediummedium (invalid)ndisc6: IPv6 Neighbor/Router Discovery userland tool %s (%s)
undefinedvalidProject-Id-Version: ndisc6
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
PO-Revision-Date: 2018-01-26 23:34+0000
Last-Translator: Andi Chandler <Unknown>
Language-Team: English (United Kingdom) <en_GB@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=2; plural=n != 1;
X-Launchpad-Export-Date: 2023-08-01 15:43+0000
X-Generator: Launchpad (build d80dbb5bdc9110f3a64cc968928033472d5e0509)

  -4    force usage of the IPv4 protocols family
  -6    force usage of the IPv6 protocols family
  -b    specify the block bytes size (default: 1024)
  -d    wait for given delay (usec) between each block (default: 0)
  -e    perform a duplex test (TCP Echo instead of TCP Discard)
  -f     fill sent data blocks with the specified file content
  -h    display this help and exit
  -n    specify the number of blocks to send (default: 100)
  -V    display program version and exit
  -v     enable verbose output

  -A   send TCP ACK probes
  -d   enable socket debugging
  -E   set TCP Explicit Congestion Notification bits in TCP packets
  -f    specify the initial hop limit (default: 1)
  -g   insert a route segment within a "Type 0" routing header
  -h   display this help and exit
  -I    use ICMPv6 Echo Request packets as probes
  -i    force outgoing network interface
  -l    display incoming packets hop limit
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n   don't perform reverse name lookup on addresses
  -p   override destination port
  -q   override the number of probes per hop (default: 3)
  -r    do not route packets
  -S   send TCP SYN probes
  -s   specify the source IPv6 address of probe packets
  -t   set traffic class of probe packets
  -U  send UDP probes (default)
  -V  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z   specify a time to wait (in ms) between each probes (default: 0)

  -A   send TCP ACK probes
  -d   enable socket debugging
  -E   set TCP Explicit Congestion Notification bits in probe packets
  -f   specify the initial hop limit (default: 1)
  -g   insert a route segment within a "Type 0" routing header
  -h   display this help and exit
  -i    force outgoing network interface
  -l    set probes byte size
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n   don't perform reverse name lookup on addresses
  -p   override source TCP port
  -q   override the number of probes per hop (default: 3)
  -r   do not route packets
  -S   send TCP SYN probes (default)
  -s   specify the source IPv6 address of probe packets
  -t   set traffic class of probe packets
  -V, --version   display program version and exit
  -w   override the timeout for response in seconds (default: 5)
  -z    specify a time to wait (in ms) between each probes (default: 0)
  DNS server lifetime :   DNS servers lifetime :   Pref. time :   Route lifetime :   Route preference : %6s
  Valid time :  ( 0x%02x)
 MTU :  Prefix :  Recursive DNS server : %s
%zu byte/packet
%zu bytes/packet
Child process hung up unexpectedly, aborting...Hop limit :    Neighbour discovery proxy  :          %3s
Reachable time : Retransmit time : Router lifetime : Router preference : %6s
Stateful address conf. : %3s
Stateful other conf. : %3s
Usage: %s [-4|-6] [hostnames]
Converts names to addresses.

-4, --ipv4                only lookup IPv4 addresses
-6, --ipv6                only lookup IPv6 addresses
-c, --config             only return addresses for locally configured protocols
-h, --help                display this help and exit
-m, --multiple        print multiple results separated by spaces
-n, --numeric         do not perform forward hostname lookup
-r, --reverse           perform reverse address to hostname lookup
-V, --version           display program version and exit
Copy text 	
Usage: %s [OPTIONS]
Starts the IPv6 Recursive DNS Server discovery Daemon.

-f, --foreground       run in the foreground
-H, --merge-hook    execute this hook whenever resolv.conf is updated
-h, --help                   display this help and exit
-p, --pidfile               override the location of the PID file
-r, --resolv-file          set the path to the generated resolv.conf file
-u, --user                   override the user to set UID to
-V, --version              display program version and exit
Usage: %s [options] <IPv6 address> <interface>
Looks up an on-link IPv6 node link-layer address (Neighbour Discovery)
Usage: %s [options] <hostname/address> [service/port number]
Use the discard TCP service at the specified host
(the default host is the local system, the default service is discard).
advertised prefixesHighInvalidLowMediumMedium (Invalid)ndisc6: IPv6 Neighbour/Router Discovery userland tool %s (%s)
UndefinedValidPRIu8 Route                    : %s/%
 Route : %s/%