File: //usr/share/locale-langpack/en_GB/LC_MESSAGES/bash.mo
�� \ � � 0 � � � ? � � ' � � � 3 �$ � �$ 4 �& � �& I �, � �, �5 � �E 4 MJ %s: nameref variable self references not allowed Evaluate arithmetic expressions.
Evaluate each ARG as an arithmetic expression. Evaluation is done in
fixed-width integers with no check for overflow, though division by 0
is trapped and flagged as an error. The following list of operators is
grouped into levels of equal-precedence operators. The levels are listed
in order of decreasing precedence.
id++, id-- variable post-increment, post-decrement
++id, --id variable pre-increment, pre-decrement
-, + unary minus, plus
!, ~ logical and bitwise negation
** exponentiation
*, /, % multiplication, division, remainder
+, - addition, subtraction
<<, >> left and right bitwise shifts
<=, >=, <, > comparison
==, != equality, inequality
& bitwise AND
^ bitwise XOR
| bitwise OR
&& logical AND
|| logical OR
expr ? expr : expr
conditional operator
=, *=, /=, %=,
+=, -=, <<=, >>=,
&=, ^=, |= assignment
Shell variables are allowed as operands. The name of the variable
is replaced by its value (coerced to a fixed-width integer) within
an expression. The variable need not have its integer attribute
turned on to be used in an expression.
Operators are evaluated in order of precedence. Sub-expressions in
parentheses are evaluated first and may override the precedence
rules above.
Exit Status:
If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise. General help using GNU software: <http://www.gnu.org/gethelp/>
Read a line from the standard input and split it into fields.
Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognized as word
delimiters.
If no NAMEs are supplied, the line read is stored in the REPLY variable.
Options:
-a array assign the words read to sequential indices of the array
variable ARRAY, starting at zero
-d delim continue until the first character of DELIM is read, rather
than newline
-e use Readline to obtain the line
-i text use TEXT as the initial text for Readline
-n nchars return after reading NCHARS characters rather than waiting
for a newline, but honor a delimiter if fewer than
NCHARS characters are read before the delimiter
-N nchars return only after reading exactly NCHARS characters, unless
EOF is encountered or read times out, ignoring any
delimiter
-p prompt output the string PROMPT without a trailing newline before
attempting to read
-r do not allow backslashes to escape any characters
-s do not echo input coming from a terminal
-t timeout time out and return failure if a complete line of
input is not read within TIMEOUT seconds. The value of the
TMOUT variable is the default timeout. TIMEOUT may be a
fractional number. If TIMEOUT is 0, read returns
immediately, without trying to read any data, returning
success only if input is available on the specified
file descriptor. The exit status is greater than 128
if the timeout is exceeded
-u fd read from file descriptor FD instead of the standard input
Exit Status:
The return code is zero, unless end-of-file is encountered, read times out
(in which case it's greater than 128), a variable assignment error occurs,
or an invalid file descriptor is supplied as the argument to -u. Set or unset values of shell options and positional parameters.
Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.
Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behavior of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not resolve symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG and RETURN traps are inherited by shell functions.
-- Assign any remaining arguments to the positional parameters.
If there are no remaining arguments, the positional parameters
are unset.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.
Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.
Exit Status:
Returns success unless an invalid option is given. Write arguments to the standard output.
Display the ARGs, separated by a single space character and followed by a
newline, on the standard output.
Options:
-n do not append a newline
-e enable interpretation of the following backslash escapes
-E explicitly suppress interpretation of backslash escapes
`echo' interprets the following backslash-escaped characters:
\a alert (bell)
\b backspace
\c suppress further output
\e escape character
\E escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\0nnn the character whose ASCII code is NNN (octal). NNN can be
0 to 3 octal digits
\xHH the eight-bit character whose value is HH (hexadecimal). HH
can be one or two hex digits
\uHHHH the Unicode character whose value is the hexadecimal value HHHH.
HHHH can be one to four hex digits.
\UHHHHHHHH the Unicode character whose value is the hexadecimal value
HHHHHHHH. HHHHHHHH can be one to eight hex digits.
Exit Status:
Returns success unless a write error occurs. bash home page: <http://www.gnu.org/software/bash>
Project-Id-Version: bash
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
PO-Revision-Date: 2020-12-21 01:38+0000
Last-Translator: Anthony Harrington <Unknown>
Language-Team: English (United Kingdom) <en_GB@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=2; plural=n != 1;
X-Launchpad-Export-Date: 2023-08-01 14:52+0000
X-Generator: Launchpad (build d80dbb5bdc9110f3a64cc968928033472d5e0509)
%s: nameref variable self references are not allowed Evaluate arithmetic expressions.
Evaluate each ARG as an arithmetic expression. Evaluation is done in
fixed-width integers with no check for overflow, though division by 0
is trapped and flagged as an error. The following list of operators is
grouped into levels of equal-precedence operators. The levels are listed
in order of decreasing precedence.
id++, id-- variable post-increment, post-decrement
++id, --id variable pre-increment, pre-decrement
-, + unary minus, plus
!, ~ logical and bitwise negation
** exponentiation
*, /, % multiplication, division, remainder
+, - addition, subtraction
<<, >> left and right bitwise shifts
<=, >=, <, > comparison
==, != equality, inequality
& bitwise AND
^ bitwise XOR
| bitwise OR
&& logical AND
|| logical OR
expr ? expr : expr
conditional operator
=, *=, /=, %=,
+=, -=, <<=, >>=,
&=, ^=, |= assignment
Shell variables are allowed as operands. The name of the variable
is replaced by its value (coerced to a fixed-width integer) within
an expression. The variable need not have its integer attribute
turned on to be used in an expression.
Operators are evaluated in order of precedence. Sub-expressions in
brackets are evaluated first and may override the precedence
rules above.
Exit Status:
If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise. General help using GNU software: <https://www.gnu.org/help/gethelp.html>
Read a line from the standard input and split it into fields.
Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognised as word
delimiters.
If no NAMEs are supplied, the line read is stored in the REPLY variable.
Options:
-a array assign the words read to sequential indices of the array
variable ARRAY, starting at zero
-d delim continue until the first character of DELIM is read, rather
than newline
-e use Readline to obtain the line
-i text use TEXT as the initial text for Readline
-n nchars return after reading NCHARS characters rather than waiting
for a newline, but honor a delimiter if fewer than
NCHARS characters are read before the delimiter
-N nchars return only after reading exactly NCHARS characters, unless
EOF is encountered or read times out, ignoring any
delimiter
-p prompt output the string PROMPT without a trailing newline before
attempting to read
-r do not allow backslashes to escape any characters
-s do not echo input coming from a terminal
-t timeout time out and return failure if a complete line of
input is not read within TIMEOUT seconds. The value of the
TMOUT variable is the default timeout. TIMEOUT may be a
fractional number. If TIMEOUT is 0, read returns
immediately, without trying to read any data, returning
success only if input is available on the specified
file descriptor. The exit status is greater than 128
if the timeout is exceeded
-u fd read from file descriptor FD instead of the standard input
Exit Status:
The return code is zero, unless end-of-file is encountered, read times out
(in which case it's greater than 128), a variable assignment error occurs,
or an invalid file descriptor is supplied as the argument to -u. Set or unset values of shell options and positional parameters.
Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.
Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behaviour of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not resolve symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG and RETURN traps are inherited by shell functions.
-- Assign any remaining arguments to the positional parameters.
If there are no remaining arguments, the positional parameters
are unset.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.
Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.
Exit Status:
Returns success unless an invalid option is given. Write arguments to the standard output.
Display the ARGs, separated by a single space character and followed by a
newline, on the standard output.
Options:
-n do not append a newline
-e enable interpretation of the following backslash escapes
-E explicitly suppress interpretation of backslash escapes
`echo' interprets the following backslash-escaped characters:
\a alert (bell)
\b backspace
\c suppress further output
\e escape character
\E escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\[tab]backslash
\0nnn the character whose ASCII code is NNN (octal). NNN can be
0 to 3 octal digits
\xHH the eight-bit character whose value is HH (hexadecimal). HH
can be one or two hex digits
\uHHHH the Unicode character whose value is the hexadecimal value HHHH.
HHHH can be one to four hex digits.
\UHHHHHHHH the Unicode character whose value is the hexadecimal value
HHHHHHHH. HHHHHHHH can be one to eight hex digits.
Exit Status:
Returns success unless a write error occurs. bash home page: <https://www.gnu.org/software/bash>